null

Binks Fluid Heater | 220 VAC 2000 (830001)

SKU:
830001
$2,643.85
Shipping:
Calculated at Checkout

Description

The Bink's stainless steel fluid heater models are wired for 120, 230 / 240 and 415 / 440 volt AC applications. The heating element is a 2000 watt cartridge type and is thermostatically controlled. The wiring, heating element and thermostat are protected by a preset heat limiter.

The thermostat is adjustable up to 250° F (121° C). The heater is off when the thermostat knob is turned counterclockwise as far as possible. The heater will not switch on until the knob is rotated to at least ambient room temperature.

Fluid heaters have been tested in a water solution. Some of this fluid may be left within the heater, therefore flush out this fluid with a solvent compatible with the material to be pumped.

This unit utilizes an explosion-proof electrical section and internally spiraling material section. The material enters the base under line pressure from the pump and is heated and delivered through to the material outlet at the top.

This unit is CSA certified for Class I, Division 1, Group D, Hazardous Locations, Temperature Code (identification number) T3.

Two or more paint heaters may be coupled together by plumbing the material outlet of the first heater to the material inlet of the next, etc.

However, the distance of piping run between the units should be limited to no more than three feet.

830000 FLUID HEATER,120 VAC 2000
830001 FLUID HEATER,220 VAC 2000
830002 FLUID HEATER,440 VAC 2000

Models................................................... X

Material.......................................................... Stainless Steel

Volts AC       830000......................... 120

830001 ............... 230 / 240

830002 ............... 415 / 440

Amperes       830000......................... 16.6

830001 ............... 8.3

830002 ............... 4.5

Watts............................................. 2000

Accuracy...................................................... ±3-1/2° F (1.9° C)

Temperature Rise Above Ambient.................. 100° F (38° C)

Recovery Rate per Hour.................................. 15 gallons (56.8 liters)

Maximum Working Pressure.......................... 5000 p.s.i. (35 MPa)

Maximum Temperature Range................ .. 60 - 250° F (16 - 121° C)

Surface Temperature Code............................. T3 (392° F / 200 ° C)

Fluid Passage Diameter................................... 0.370" (9.4 mm)

Fluid Passage Length...................................... 91.7" (232.9 cm)

Fluid Passage Volume..................................... 9.86 in.3 (0.162 lit.)

Inlet / Outlet Port Size (female)....................... 1/2 - 14 N.P.T.F. - 1

Weight............................................................ 18 lbs (8.2 kg)

 

Extra Information

Brand:
Binks