CA TECH CAT-XPRESS
The Newest Technology for the Finest Finishes
- Information
- Versions/Accessories
- Spare Parts
- Specifications
- Literature
- Videos and Images
C.A.Technologies is proud to introduce our new CAT-Xpress professional grade pressure feed spray gun. The CAT-Xpress provides extreme atomization, handle ergonomics, and fluid delivery superior to all the competitive guns on the market today. The CAT-Xpress includes the HVLP air cap and the pressure reduced air cap to meet all the codes and regulations throughout the United States.
New Style Fluid Tip
The CAT-Xpress has a re-designed fluid tip, set apart by its thread-less construction. Easy to swap out and more fluid flow capabilities
Precision Engineered Air Caps
The HVLP and reduced pressure air caps are precision engineered to keep atomization particle size at the absolute finest
Fan Control
The fan control is located at an easy access point on the handle of the spray gun, allowing one handed or easy access quarter turn pattern adjustment
Lightweight Ergonomic Construction
The CAT-Xpress is constructed to be lightweight with handle ergonomics to be more comfortable and providing less sprayer’s fatigue
Spray Pack Setups
| Part Number | Kit Includes |
Includes CAT-Xpress, 3 needle/nozzle setups (0.8, 1.3, 1.8), 2 air caps, tools & case. | |
Includes CAT-Xpress, 3 needle/nozzle setups (0.8, 1.3, 1.8), 2 air caps, 1qt pressure cup w/regulator, tools & case. | |
Includes CAT-Xpress, 3 needle/nozzle setups (0.8, 1.3, 1.8), 2 air caps, 1qt PPS cup, 3 lids/liners, adapter, tools & case. |
| Item No. | Part No. | Description |
| 1 | Air Cap Ring | |
| 2 | Air Cap Sealing Ring | |
| 3 | O-Ring | |
| 4 | See Chart | Air Cap |
| 5 | Nozzle Body | |
| 6 | Air Baffle | |
| 7 | See Chart | Fluid Nozzle |
| 8 | Fluid Nozzle Body Carrier | |
| 9 | O-Ring | |
| 10 | Needle Packing Assembly | |
| 11 | Fluid Inlet Sealing Ring | |
| 12 | Lock Nut | |
| 13 | Fluid Inlet | |
| 14 | Air Control Knob | |
| 15 | Air Inlet | |
| 16 | Trigger | |
| 17 | Trigger Pin | |
| 18 | Spring washer | |
| 19 | Trigger Screw | |
| 20 | Air Valve (Complete) | |
| 21 | O-Ring | |
| 22 | O-Ring | |
| 23 | Air Valve Stem Cap | |
| 24 | Air Valve Stem | |
| 25 | Air Valve Poppet | |
| 26 | Air Valve Spring | |
| 27 | Rear Cap | |
| 28 | See Chart | Fluid Needle |
| 29 | Fan Control Assembly | |
| 30 | Fan Control Rod Seal | |
| 31 | Fan Adjustment Housing | |
| 32 | Fan Adjustment Knob | |
| 33 | Fan Adjustment Knob Screw | |
| 34 | Fan Control Seal | |
| 35 | Fan Control Sleeve | |
| 36 | Fluid Adjustment Knob | |
| 37 | Fluid Adjustment Lock Nut | |
| 38 | Needle Spring Guide | |
| 39 | Needle Spring | |
| 40 | Gun Body | |
| 41 | 1/16” Allen Wrench for #33 |
Air Cap and Fluid Nozzle
| Pressure Reduced Air Cap | SCFM @ Max Gun Inlet Pressure | HVLP Air Cap | SCFM @ Max Gun Inlet Pressure for HVLP | Fluid Tip Range | Orifice Size | Fluid Tip Part Number | Fluid Needle Part Number |
| 9 CFM @ 29 PSI | 9 CFM @ 29 PSI | 0.8 mm to 1.8 mm | 0.8 mm | ||||
| 9 CFM @ 29 PSI | 9 CFM @ 29 PSI | 0.8 mm to 1.8 mm | 1.0 mm | ||||
| 9 CFM @ 29 PSI | 9 CFM @ 29 PSI | 0.8 mm to 1.8 mm | 1.2 mm | ||||
| 9 CFM @ 29 PSI | 9 CFM @ 29 PSI | 0.8 mm to 1.8 mm | 1.3 mm | ||||
| 9 CFM @ 29 PSI | 9 CFM @ 29 PSI | 0.8 mm to 1.8 mm | 1.5 mm | ||||
| 9 CFM @ 29 PSI | 9 CFM @ 29 PSI | 0.8 mm to 1.8 mm | 1.8 mm | ||||
| 9 CFM @ 29 PSI | 9 CFM @ 29 PSI | 2.0 mm to 2.2 mm | 2.0 mm | ||||
| 9 CFM @ 29 PSI | 9 CFM @ 29 PSI | 2.0 mm to 2.2 mm | 2.2 mm |
Fluid Nozzle and Air Cap Selection Chart
| Material Type | Fluid Orifice x Air Cap | Maximum Pattern Width | CFM |
| Very thin less than 16 sec. Zahn #2 inks, dyes, solvents, stains | |||
| Thin 16 to 20 sec. Zahn #2 lacquers, enamels, primers, sealers | |||
| Medium 21 to 30 sec. Zahn #2 automotive base coat, enamels, primers, epoxies, urethanes, automotive clear coat | |||
| Heavy over 30 sec. Zahn #2 heavy body primers, high solid enamels, high solid automotive coatings, adhesives |
Buying Options
| CAT-XPR | CAT-XPR-303R2 | CAT-XPR-PPSR2 |
| Feature | Specification |
Air InletFluid InleWeightHVLP Air CapsPressure Reduced Air Caps | 1/4” NPS (m)3/8" NPS (m)20 oz.Require 9 CFM @ 26 PSIRequire 9 CFM @ 29 PSI |
| Feature Brochure | Manual |
| | |