Walther Pilot GA 9010 Overview

PILOT GA 9010

The New Standard in High Speed Contact Marking Gun

STANDARD VERISON

MEMBRANE VERSION

The PILOT GA 9010 Marking is a fully automatic spray gun for spot and line marking. It is suitable for alphanumeric labeling.

With the PILOT GA 9010 Marking sharp-edged markings are possible. The extremely short switching times (opening, spraying, closing) make it ideal for use in productions with short cycle times. Due to specially suited flushing devices and robust design, the PILOT GA 9010 Marking ensures a smooth production flow even under the most difficult conditions.

Applications:

• OK and NOK component marking
• Alphanumeric labelling
• Food processing
• Adhesive processing with spot-accurate application
• Markings following weld seam inspection of sheets and pipes
• Marking of rejects
• OK component marking
• Machine-recognizable marking following leak check
• Labelling as an orientation tool
• Labelling of different construction types with the same appearance
• Production line identification (e.g. cutting and bending lines)

Standard Sku.	Size	Membrane Sku.	Size
V2130051033	0.3mm	V2132151033	0.3mm
V2130051053	0.5mm	V2132151053	0.5mm
V2130051083	0.8mm	V2132151083	0.8mm
V2130051103	1.0mm	V2132151103	1.0mm
V2130051123	1.2mm	V2132151123	1.2mm
V2130051153	1.5mm	V2132151153	1.5mm

Accessories

Part No.	Description
V2130025000	Gun Holder
V0000000001	Gun Grease
V2033528003	Air Cap Nut Instilation Tool

Features	Specification
Dimensions (H x W x D) Nozzle Sizes Available Atomizing Air Connection Control Air Connection Material Feed Atomizing Air Pressure Control Air Pressure Material Pressure Operating Temperature Sound Pressure	29 x 22 x 128 mm Ø 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm 2 x M7 - PK 4 2 x M 5 - PK 3 1 x M5 and 3x 1/8" 0 - 6 bar min. 4 bar – max. 6 bar 0 – 6 bar (0.3 – 4 bar MB) max. 80 °C (50 °C MB) 1 bar = 64 dB (A) 6 bar = 83 dB (A)

GA 9010 Marking Spare Parts

Item No.	Part No.	Description
1	V2130003000	Sleeve Nut
2	V2033913XX3	Round Jet Air Cap
3	V2033623XXX	Material Nozzle
4	V2130007000	Hexagon Socket Screw
5	V2130002000	Front Part Complete
6	V6610002127	Quick-action Coupling
7	V2130018000	Plug
8	V2130004000	Needle Seal
9	V2130005000	Pressure Ring for Needle Seal
10	V2035304000	Pressure Spring
11	V2130006000	Packing Screw
12	V0910220001	O-Ring
13	V6610186353	L-shaped Push-in Fitting
14	V6610153333	L-shaped Push-in Fitting
15	V2130001000	Piston Casting Complete
16	V2130009000	Symmetrical Lip Seal
17	V2130011KPL	Piston Complete
18	V21300031XX3	Material Needle Complete
19	V2130014000	Needle Spring
20	V2130015000	Piston Spring
21	V2130016000	Raster Setting Complete

GA 9010 Membrane Spare Parts

Item No.	Part No.	Description
1	V2130003000	Sleeve Nut
2	V2033913XX3	Round Jet Air Cap
3	V2033623XXX	Material Nozzle
4	V2130007000	Hexagon Socket Screw
5	V2130002000	Front Part Complete
6	V6610002127	Quick-action Coupling
7	V2130018000	Plug
12	V0910220001	O-Ring
13	V6610186353	L-shaped Push-in Fitting
14	V6610153333	L-shaped Push-in Fitting
15	V2130001000	Piston Casting Complete
16	V2130009000	Symmetrical Lip Seal
17	V2130011KPL	Piston Complete
18	V2132031XX3	Material Needle Complete
19	V2130014000	Needle Spring
20	V2130015000	Piston Spring
21	V2130016000	Raster Setting Complete
22	V2132005000	Backing Disc
23	V2132003000	Clamping Bush
24	V2132009000	Friction Bearing
25	V2132010000	Coupling
26	V2132011000	Hexagon Socket Screw
27	V2130028000	Piston Rod Complete

Air Caps

Jet Type	Type	Part No.	Nozzle Size	Material	Dot Size	Line Thickness	Surface	Info
Wide Jet	1.1	V2033914032	0.3 - 0.5mm	Brass (Ms), nickel-coated 2-hole		5-10mm	15 - 30mm
Wide Jet	1.2	V2033914082	0.8 - 1.0mm	Brass (Ms), nickel-coated 2-hole		5-10mm	15 - 30mm
Wide Jet	1.3	V2033914122	1.2 - 1.5mm	Brass (Ms), nickel-coated 2-hole		5-10mm	15 - 30mm
Wide Jet	4.1	V2033914032	0.3 - 0.5mm	Stainless steel 1.4305 2-hole		5-10mm	15 - 30mm
Wide Jet	4.2	V2033914082	0.8 - 1.0mm	Stainless steel 1.4305 2-hole		5-10mm	15 - 30mm
Wide Jet	4.3	V2033914122	1.2 - 1.5mm	Stainless steel 1.4305 2-hole		5-10mm	15 - 30mm
Round Jet	2.0	V2033634031	0.3 - 0.5mm	Ms, nickelcoated		5-10mm	15 - 30mm
Round Jet	2.0	V2033634081	0.8 - 1.0mm	Ms, nickelcoated		5-10mm	15 - 30mm
Round Jet	2.0	V2033634121	1.2 - 1.5mm	Ms, nickelcoated		5-10mm	15 - 30mm
Round Jet	2.1	V2033913033	0.3 - 0.5mm	Ms, nickelcoated	2 - 30 mm	2 - 30mm		When marking with dots, select an air cap one number higher.
Round Jet	2.2	V2033913083	0.8 - 1.0mm	Ms, nickelcoated	2 - 30 mm	2 - 30mm		When marking with dots, select an air cap one number higher.
Round Jet	2.3	V2033913123	1.2 - 1.5mm	Ms, nickelcoated	2 - 30 mm	2 - 30mm		When marking with dots, select an air cap one number higher.
Round Jet	2.4	V2033634155	1.2 - 1.5mm	Ms, nickelcoated	2 - 30 mm	2 - 30mm		When marking with dots, select an air cap one number higher.
Round Jet	3.1	V2033913033	0.3 - 0.5mm	Stainless steel 1.4305	2 - 30 mm	2 - 30mm
Round Jet	3.2	V2033913083	0.8 - 1.0mm	Stainless steel 1.4305	2 - 30 mm	2 - 30mm
Round Jet	3.3	V2033913123	1.2 - 1.5mm	Stainless steel 1.4305	2 - 30 mm	2 - 30mm
Wide Jet	5.1	V2033644032	0.3 - 0.5mm	Ms, nickelcoated		5 - 10mm	15 - 25mm
Wide Jet	5.2	V2033644082	0.8 - 1.0mm	Ms, nickelcoated		5 - 10mm	15 - 25mm
Wide Jet	5.3	V2033644122	1.2 - 1.5mm	Ms, nickelcoated		5 - 10mm	15 - 25mm
Wide Jet	6.1	V2033917034	0.3 - 0.5mm	Stainless steel 1.4305 4-hole			20 - 60mm
Wide Jet	6.2	V2033917084	0.8 - 1.0mm	Stainless steel 1.4305 4-hole			20 - 60mm
Wide Jet	6.3	V2033917124	1.2 - 1.5mm	Stainless steel 1.4305 4-hole			20 - 60mm

Nozzles

Size	Part No.	Material	Info
0.3mm	V2033625033	Stainless steel 1.4305	Water varnish
0.4mm	V2033625043	Stainless steel 1.4305	Water varnish
0.5mm	V2033625053	Stainless steel 1.4305	Water varnish
0.8mm	V2033625083	Stainless steel 1.4305	Water varnish
1.0mm	V2033625103	Stainless steel 1.4305	Water varnish
1.2mm	V2033625123	Stainless steel 1.4305	Water varnish
1.5mm	V2033625153	Stainless steel 1.4305	Water varnish
0.2mm	V2033623023	Stainless steel 1.4305	Standard
0.3mm	V2033623033	Stainless steel 1.4305	Standard
0.4mm	V2033623043	Stainless steel 1.4305	Standard
0.5mm	V2033623053	Stainless steel 1.4305	Standard
0.8mm	V2033623083	Stainless steel 1.4305	Standard
1.0mm	V2033623103	Stainless steel 1.4305	Standard
1.2mm	V2033623123	Stainless steel 1.4305	Standard
1.5mm	V2033623153	Stainless steel 1.4305	Standard
0.2mm	V203362302B	Stainless steel 1.4305	"Adhesives/fast drying paints"
0.3mm	V203362302B	Stainless steel 1.4305	"Adhesives/fast drying paints"
0.5mm	V203362305B	Stainless steel 1.4305	"Adhesives/fast drying paints"

Repair Kits

Name	Part No.
GA 9010 Marking	V1630000XX3
GA 9010 Marking-MB	V1632000XX3

Seal Sets

Name	Part No.
GA 9010 Marking	V1721300000
GA 9010 Marking-MB	V1721320000

Nozzle/Needle Sets

Model	Part No.	Air Cap Variant (Brass, Nickel-coated)	Air Cap Variant (Stainless Steel)
Text	V1530000XX3	V2033634XX5	V2033934XX5
Text	V1530000XX3	V2033644XX2
Text	V1530000XX3	V2033650XX5
Text	V1532000XX3	V2033634XX5	V2033934XX5
Text	V1532000XX3	V2033644XX2
Text	V1532000XX3	V2033650XX5

Brochure	Manual

Walther Pilot GA 9010 Overview

PILOT GA 9010

STANDARD VERISON

MEMBRANE VERSION

The PILOT GA 9010 Marking is a fully automatic spray gun for spot and line marking. It is suitable for alphanumeric labeling.

Accessories

Dimensions (H x W x D)

Nozzle Sizes Available

Atomizing Air Connection

Control Air Connection

Material Feed

Atomizing Air Pressure

Control Air Pressure

Material Pressure

Operating Temperature

Sound Pressure

29 x 22 x 128 mm

Ø 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm

2 x M7 - PK 4

2 x M 5 - PK 3

1 x M5 and 3x 1/8"

0 - 6 bar

min. 4 bar – max. 6 bar

0 – 6 bar (0.3 – 4 bar MB)

max. 80 °C (50 °C MB)

1 bar = 64 dB (A) 6 bar = 83 dB (A)

GA 9010 Marking Spare Parts

GA 9010 Membrane Spare Parts

Air Caps

Nozzles

Repair Kits

Seal Sets

Nozzle/Needle Sets

Repair

Demo

360°

Information

Versions Available

STANDARD

MEMBRANE