null

Binks Trophy Manual Spray Gun

Binks Trophy

Features:

Light Weight – one of the lightest spray guns in the industry.

Designed To The Hand – our gun designers tested a variety of hands and grips to come up with the ideal design for the Trophy. The form is ultimately about function and reduced stress.

Trigger Pull – the easy trigger pull action is created by the unique, built-in stabilization features.

No Kick Air Valve – delivers the smoothest trigger pull on the market. Virtually eliminates any recoil from triggering.

Knobs And Air Cap Rings – all the hand adjustments have been designed and manufactured to make it nearly effortless to dial in on your settings or remove parts for maintenance or substitution.

Start With Confidence.
Finish With A Trophy.


Binks Trophy Series Spray Guns feel different by design. They’re lighter and are easier to handle over longer periods of time. That means operators can spray for longer periods with less fatigue and injury. This can make a big difference to productivity and your bottom line. That’s why we take ergonomics so seriously.

From wood to metals to ceramics and more, Binks Trophy Series Spray Equipment can handle your coating needs from start to finish.

Binks engineering has developed a broad selection of air caps to ensure our ability to provide customers with the right gun with the perfect air cap for the job. The new air cap designs provide uniform spray patterns with consistent atomization from top to bottom.  

Application Versatility and Consistent Championship Performance

Whatever size job or part you’re finishing – whatever material you’re spraying – Binks Trophy Series spray guns provide the technology and confidence needed for most jobs and coatings.

The Binks Trophy Series Line of Spray Guns Offer Unparalleled Robustness For Industrial Coating and Finishing Requirements.

Combined with comprehensive and compatible fluid nozzle and needles - including our hardened stainless steel Tuff Tip, plastic needle tips, and tungsten carbide – Trophy series spray equipment is fully capable of spraying the widest range of materials and viscosities.

Coating Types

 
 
  • THIN (5-25 Centipoise, 15-19 sec. Zahn 2 Cup) - Wash primers, dyes, stains, solvents, water, inks, sealers, lacquers, lubricants, zinc chromates, acrylics
  • MEDIUM (20-70 Centipoise, 20-30 sec. Zahn 2 Cup) - Synthetic enamels, varnishes, shellacs, fillers, primers, epoxies, urethanes, lubricants, wax emulsions, enamels
  • HEAVY (70-160 Centipoise, 31-66 sec Zahn 2 Cup)
  • ADHESIVES - Water-based vinyl, glues, solvent-based neoprenes, contact cements
  • CERAMICS - Abrasive materials, glazes, porcelain enamel

Atomization Technologies

 
 
  • HVLP - Air Pressure is less than 10 psi at the air cap. Meets USA standards
    and regulatory requirements
  • LVMP - Provides equal to or greater transfer efficiency at higher air pressures than HVLP
  • CONV - Can spray at any air pressure. Good for viscous materials

Conventional

Adhesives

Mold Release

Trophy Setup Part Number Fluid Nozzle & Air Cap

Ceramics & Abrasives

Non-Stick Coatings

Wrinkle Enamels

Trophy Setup Part Number Fluid Nozzle & Air Cap

Zinc Rich Coatings

Trophy Setup Part Number Fluid Nozzle & Air Cap

LVMP

HVLP

Pressure/Siphon

Item No. Description Part No.

1

Air Cap Retaining Ring Assembly

5

Air Cap

See Below

6

Spring-Clip (Kit of 10)

7

Fluid Nozzle

See Below

8

Baffle/Separator (Kit of 3)

9

Side Port Valve Assembly

10

Retaining Clip

-

11

Body Bushing

-

12

O-Ring

-

13

Side Port Stem

-

14

Pin

-

15

Air Valve Service Kit

16

Front Seal - Air Valve

-

17

Front Air Valve Seal

-

18

Air Valve Spindle

19

Air Valve Spring

-

20

Real Seal - Air Valve

-

21

Housing

22

Needle - Stainless Steel (STD.) Marking: I

22

Needle - Feathering

See Chart

22

Needle - Tungsten Carbide Marking: II

22

Needle - Plastic Tip Marking: III

23

Spring/Pad Assembly

-

23

Spring/Pad (Standard) (Kit of 3)

23

Spring/Pad Assembly Kit - Heavy Duty (Optional)

24

Knob - Needle Adjusting

25

Needle Packing Kit (Standard)

25

Needle Packing Kit (Vitreous)

26

Nut - Packing

-

27

Spring for Packing

-

28

Needle Packing (Standard)

-

28

Needle Packing (Vitreous Kit of 3)

-

29

Trigger

30

Trigger Screw Nut Kit

31

Trigger Screw

-

32

Trigger Nut

-

33

Spindle Cap

34

Plug

35

Fitting - Air Inlet

36

Gun Body with Fluid Inlet

-

37

Tool - Seal Insertion

38

Gunner's Mate (3 CC Bag)

-

Repair Kits

Part No. Includes:

10, 11, 12, 13, 14

26, 27, 28

26, 27

28

16, 17, 19, 20  

31, 32

10, 12, 14

28

15, 18, 23, 28

Stainless Steel Feathering Needles and Nozzles

Feathering Needle Part No. Marking on the Needle Matching Nozzle P/N (Orifice Size)

I IIII

45-11050-12 1.2MM (.047")

II IIII

45-11050-14 1.4MM (.055")

II IIII

45-11050-18 1.8MM (.071")

Tungsten Carbide Nozzles and Needles

Nozzle Size Nozzle Needle

1.4 MM (.055")

1.8 MM (.071")

2.2 MM (.086")

2.6 MM (.102")

Stainless Steel (Hardened) Fluid Nozzles - STD

Stainless Nozzle Orifice Size Part No.

.020"

.50mm

.035"

.85mm

.039"

1.0mm

.047"

1.2mm

.055"

1.4mm

.063"

1.6mm

.071"

1.8mm

.079"

2.0mm

.087"

2.2mm

.102"

2.6mm

Test Air Cap Kits - Optional

Conventional
Part No. Version

11-C KIT

12-C KIT

14-C KIT

LVMP
LVMP Version

22-L KIT

23-L KIT

25-L KIT

HVLP
Part No. Version

31-H KIT – HVLP

32-H KIT – HVLP

33-H KIT – HVLP

39-H KIT – HVLP

Gravity

Item No. Description Part No.

1

Air Cap Retaining Ring Assembly

5

Air Cap

See Below

6

Spring-Clip (Kit of 10)

7

Fluid Nozzle

See Chart

8

Baffle/Separator (Kit of 3)

9

Side Port Valve Assembly

10

Retaining Clip

-

11

Body Bushing

-

12

O-Ring

-

13

Side Port Stem

-

14

Pin

-

15

Air Valve Service Kit

16

Front Seal - Air Valve

-

17

Front Air Valve Seal

-

18

Air Valve Spindle

19

Air Valve Spring

-

20

Rear Seal - Air Valve

-

21

Housing

22

Needle - Stainless Steel (STD.)

23

Spring/Pad Assembly

-

23

Spring/Pad Assembly (Kit of 3)

24

Knob - Needle Adjusting

25

Needle Packing Kit (Standard)

26

Nut - Packing

-

27

Spring for Packing

-

28

Needle Packing (Standard)

-

29

Trigger

30

Trigger Screw Nut Kit

31

Trigger Screw

-

32

Trigger Nut

-

33

Spindle Cap

34

Plug

35

Fitting - Air Inlet

36

Gun Body with Fluid Inlet

-

37

Tool - Seal Insertion

-

38

Gunner's Mate (3 CC Bag)

-

Repair Kits

Part No. Includes:

10, 11, 12, 13, 14

26, 27, 28

28

16, 17, 19, 20

31, 32

10, 12, 14

15, 18, 23, 28

Stainless Steel Hardened Nozzles

Stainless Nozzle Orifice Size Part No.

.039"

1.0mm

.047"

1.2mm

.055"

1.4mm

.063"

1.6mm

.071"

1.8mm

Test Air Cap Kits - Optional

Part No. Description

12-C Conventional

23-L LVMP

32-H HVLP


Air Cap and Nozzle Selection Chart

Conventional

Air Cap Air Cap Part No. Pattern Range CFM @ 30 PSI CFM @ 50 PSI CFM @ 70 PSI Nozzle Version Coatings

11-C

8 - 12"

9.8

14.2

18.7

45-11050 series, 1.0 mm – 1.8 mm

P

Stains, Primers, Lacquers, Enamels, Acrylics, Reduced Latex, Mold Release

12-C

4 - 12"

8.3

12.1

14.2

45-11050 series, 1.0 mm – 1.8 mm

P,S,G

Lacquers, Enamels, Top Coats, Low Viscosity Adhesives

14-C

8 - 14"

17.0

24.4

31.2

45-11060 series, 2.0 mm – 2.6 mm or
45-11080 Tungsten Carbide
Series (VT), 1.4 mm – 2.6 mm

P

Zinc Rich, Adhesives, Glazes, Engobies, Ceramics, Porcelain Enamels

LVMP

Air Cap Air Cap Part No. Pattern Range CFM @ 30 PSI Gun Inlet (Dynamic) Nozzle Version Coatings

22-L

4 - 12"

11.2

45-11050 series, .5 mm – 1.6 mm

P,S

Stains, Primers, Lacquers, Enamels, Acrylics, Reduced Latex

23-L

4 - 12"

10.6

45-11050 series, 1.0 mm – 1.8 mm

P,S,G

Lacquers, Enamels, Top Coats, Low Viscosity Adhesives

24-L

2 - 6"

14.3

45-11050 series, .5 mm – 1.8 mm

P,S,G

Small Pattern Applications of Stains,
Lacquers, Enamels, Acrylics

25-L

4 - 15"

14.7

45-11050 series, .85 mm – 1.8 mm

P

Dyes, Stains, Toners, Enamels, Lacquers, Primers, Urethanes, Solvent Coatings,
Waterborne Coatings

HVLP

Air Cap Air Cap Part No. Pattern Range SCFM @ 10 PSI Cap Pressure (Dynamic) SCFM @ 10 PSI Gun Inlet (Dynamic) Nozzle Version Coatings

31-H

8 - 12"

10.5

17

45-11050 series, .85 mm – 1.8 mm

P,S

Stains, Low Viscous Enamels

32-H

8 - 18"

15.5

24

45-11050 series, .85 mm – 1.8 mm

P,S,G

Lacquers, Enamels, Multi-Colors, Multi-Spec, Nonstick Coatings, Cut-Latex

33-H

8 - 12"

11.0

16

45-11050 series, .85 mm – 1.6 mm

P

Stains, Lacquers, Enamel, Multi-Color, Multi-Spec, Nonstick Coatings

39-H

4 - 12"

10.0

14

45-11050 series, .85 mm – 1.6 mm

P

Dyes, Stains, Toners, Enamels, Lacquers, Primers, Urethanes, Solvent Coatings,
Waterborne Coatings

Round Air Cap and Nozzle Selection Chart

Air Cap Air Cap Part No. Pattern Range CFM @ 30 PSI CFM @ 50 PSI CFM @ 70 PSI Nozzle Version Coatings

16

2 - 4"

5.6

7.8

10.5

45-11050 series, 1.0 mm - 1.8 mm

P,S,G

Lacquers, Enamels

Feature Specification

Maximum Air Pressure

140 psi / 9.6 bar (P-1)

Maximum Fluid Pressure

140 psi / 9.6 bar (P-2) (with standard spring)

Maximum Fluid Pressure

300 psi / 20.6 bar (P-2) (with optional spring)

Gun Body

Anodized Aluminum

Fluid Path

Stainless Steel

Fluid Inlet Size

3/8" NPS / BSP(m)

Air Inlet Size

1/4" NPS / BSP(m)

Gun Weight

14 oz. / 410 grams

Wetted Parts

Stainless Steel & PTFE

English, Spanish, French, German, Italian Gravity Manual English Pressure and Siphon Manual Brochure for Binks Trophy Spray Gun

Information

Offical Cleaning

Offical Maintenance

Application

Use

Trailer



Shop By Feed