Filters, Coalescers and Dryers

(Showing 19 of 19)

Micron Filtration up to 0.01 at 99.99998%
Automatic Drains
No tools required for element change
Quick disconnect clamp ring design
Filter change indicators
Removes water, dirt and oil

Filters

This unit is a point of use oil/water filter with a desiccant drying cartridge for single gun painting operations where dry clean air is critical. Perfect for low volume shops.

Part No.

Description

Replacement Cartridge

52-533	Unit includes mini desiccant dryer	52-559
52-534	Unit includes one regulator for single gun operation	52-559

The most effective low cost product on the market. This unit provides one (1) micron filtration of water and dirt in compressed air lines. Rated at 60 SCFM, these units are recommended for point of use applications. Features include manual drain, heavy duty metal bowel construction, easy spin-off cartridge replacement. Also included are metal regulator(s) and glass faced gage for accurate pressure control. Maximum air pressure is 150 PSIG.

52-511	Unit includes one regulator for one (1) gun operation	52-551
52-512	Unit includes one regulator and main line blow off. Intended for one gun operation, this unit also includes two (2) - 1/4” ball valves	52-551
52-513	Deluxe unit includes two (2) regulators for two (2) gun operation plus main line blow off. Also included are three (3) - 1/4” ball valves	52-551
52-515	Unit includes 1/2” port sizes and comes standard with auto drain and filter load indicator	52-551
52-516	Unit includes one regulator for one (1) gun operation and comes standard with auto drain and filter load indicator	52-551

Filter/Coalescer

The Filter / Coalescer is a two stage combination unit that offers the finest system for removal of water, dirt and oil in the industry. Due to the prefilter design this unit can be used in high contamination areas without high element replacement rates. The first stage removes particles and water while the 2nd stage removes oil contaminants. This unit is rated at 60 SCFM and removes water, dirt and oil to 0.01 micron at 98.99998% efficiency. For point of use operation.

52-520	Unit includes filter / coalescer only. It has 1/2” port size and comes with auto drain and filter load indicators standard	52-552 (first stage) 52-553 (second stage)
52-522	Unit includes filter / coalescer with one (1) regulator and two (2) ball valves. Port sizes are 1/2” and come with auto drain and filter load indicators standard. Second ball valve is used for main line	52-552 (first stage) 52-553 (second stage)
52-523	Unit includes filter / coalescer with two (2) regulators and three (3) ball valves. Third ball valve used for main line. Unit has 1/2” port sizes and comes with auto drain and filter load indicators standard	52-552 (first stage) 52-553 (second stage)
52-525	Unit includes 2nd stage coalescer 1/2” port sizes and comes standard with auto drain and filter load indicator	52-552 (first stage) 52-553 (second stage)

Main Line Combo

52-535

Combo unit is designed to remove bulk oil, dirt and water to 0.01 microns. Unit combines first stage separator and second stage coalescer. Perfect for removing contaminants to extend life of down stream units. Second stage comes with filter load indicator while auto drains are standard on both units. Rated at 90 SCFM and has 3/4” ports.

52-557 (first stage)

52-558 (second stage)

Filter/Dryer

52-531

This unit is a point of use two (2) stage oil water extractor with a desiccant drying cartridge for one (1) gun painting operations where dry clean air is critical such as automobile or fine wood finishing. Desiccant unit has an indicator to show when unit is saturated and needs replacement. Unit comes with ball valve at inlet and regulator for one (1) gun regulation. This is what all fine finishers should have. Maximum flow is 25 SCFM and rated to one (1) micron.

52-554 (first stage)

52-555 (second stage)

Filter: Removes of water and contaminants

Coalescer: Removes of oil and sub-micronic particles down to .01 microns

Desicant Dryer: Removes uncondensed moisture