Binks Trophy Automatic
- Information
- Versions
- Spare Parts
- Specifications
- Literature
Features:
Light Weight – one of the lightest spray guns in the industry.
Designed To The Hand – our gun designers tested a variety of hands and grips to come up with the ideal design for the Trophy. The form is ultimately about function and reduced stress.
Trigger Pull – the easy trigger pull action is created by the unique, built-in stabilization features.
No Kick Air Valve – delivers the smoothest trigger pull on the market. Virtually eliminates any recoil from triggering.
Knobs And Air Cap Rings – all the hand adjustments have been designed and manufactured to make it nearly effortless to dial in on your settings or remove parts for maintenance or substitution.
Start With Confidence.
Finish With A Trophy.
Binks Trophy Series Spray Guns feel different by design. They’re lighter and are easier to handle over longer periods of time. That means operators can spray for longer periods with less fatigue and injury. This can make a big difference to productivity and your bottom line. That’s why we take ergonomics so seriously.
From wood to metals to ceramics and more, Binks Trophy Series Spray Equipment can handle your coating needs from start to finish.
Binks engineering has developed a broad selection of air caps to ensure our ability to provide customers with the right gun with the perfect air cap for the job. The new air cap designs provide uniform spray patterns with consistent atomization from top to bottom.
Application Versatility and Consistent Championship Performance
Whatever size job or part you’re finishing – whatever material you’re spraying – Binks Trophy Series spray guns provide the technology and confidence needed for most jobs and coatings.
The Binks Trophy Series Line of Spray Guns Offer Unparalleled Robustness For Industrial Coating and Finishing Requirements.
Combined with comprehensive and compatible fluid nozzle and needles - including our hardened stainless steel Tuff Tip, plastic needle tips, and tungsten carbide – Trophy series spray equipment is fully capable of spraying the widest range of materials and viscosities.
Coating Types
- THIN (5-25 Centipoise, 15-19 sec. Zahn 2 Cup) - Wash primers, dyes, stains, solvents, water, inks, sealers, lacquers, lubricants, zinc chromates, acrylics
- MEDIUM (20-70 Centipoise, 20-30 sec. Zahn 2 Cup) - Synthetic enamels, varnishes, shellacs, fillers, primers, epoxies, urethanes, lubricants, wax emulsions, enamels
- HEAVY (70-160 Centipoise, 31-66 sec Zahn 2 Cup)
- ADHESIVES - Water-based vinyl, glues, solvent-based neoprenes, contact cements
- CERAMICS - Abrasive materials, glazes, porcelain enamel
Atomization Technologies
- HVLP - Air Pressure is less than 10 psi at the air cap. Meets USA standards
and regulatory requirements - LVMP - Provides equal to or greater transfer efficiency at higher air pressures than HVLP
- CONV - Can spray at any air pressure. Good for viscous materials
Conventional
Thin (5-25 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.0 mm (.039") X 11C | |
| 1.2 mm (.047") X 11C | |
| 1.4 mm (.055") X 11C | |
| 1.6 mm (.063") X 11C | |
| 1.6 mm (.063") X 12C |
Medium (25-70 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.2 mm (.047") X 11C | |
| 1.4 mm (.055") X 11C | |
| 1.6 mm (.063") X 11C | |
| 1.6 mm (.063") X 12C | |
| 1.8 mm (.070") X 11C | |
| 2.0 mm (.079") X 14C | |
| 2.2 mm (.087") X 14C |
Heavy (70-160 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.6 mm (.063") X 11C | |
| 1.6 mm (.063") X 12C | |
| 1.8 mm (.070") X 11C | |
| 2.0 mm (.079") X 14C | |
| 2.2 mm (.087") X 14C |
Adhesives
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 2.0 mm (.079") X 14C | |
| 2.2 mm (.087") X 14C |
Mold Release
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.2 mm (.047") X 11C |
Ceramics & Abrasives
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.4 mm (.055") X 14C | |
| 1.8 mm (.070") X 14C | |
| 2.2 mm (.087") X 14C | |
| 2.6 mm (.102") X 14C |
Non-Stick Coatings
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.0 mm (.039") X 11C | |
| 1.2 mm (.047") X 11C |
Hammers
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.4 mm (.055") X 11C | |
| 1.6 mm (.063") X 11C | |
| 1.6 mm (.063") X 12C |
Wrinkle Enamels
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.4 mm (.055") X 11C | |
| 1.6 mm (.063") X 11C |
Zinc Rich Coatings
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 2.2 mm (.087") X 14C |
LVMP
Thin (5-25 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 0.85 mm (.034") X 22L | |
| 1.0 mm (.039") X 22L | |
| 1.2 mm (.047") X 23L | |
| 1.4 mm (.055") X 23L | |
| 1.4 mm (.055”) X 24L | |
| 0.85 mm (.034”) X 25L | |
| 1.0 mm (.039”) X 25L |
Medium (25-70 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.2 mm (.047") X 23L | |
| 1.4 mm (.055") X 23L | |
| 1.4 mm (.055”) X 24L | |
| 1.6 mm (.063”) X 23L | |
| 1.4 mm (.055”) X 25L | |
| 1.8 mm (.070”) X 25L |
HVLP
Thin (5-25 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 0.85 mm (.034") X 33H | |
| 0.85 mm (.034") X 31H | |
| 1.0 mm (.039") X 33H | |
| 1.0 mm (.039") X 31H | |
| 1.0 mm (.039") X 32H | |
| 1.2 mm (.047") X 32H | |
| 1.2 mm (.047”) X 31H | |
| 0.85 mm (.034”) X 39H | |
| 1.0 mm (.039”) X 39H | |
| 1.2 mm (.047”) X 39H |
Medium (25-70 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.0 mm (.039”) X 32H | |
| 1.2 mm (.047”) X 32H | |
| 1.2 mm (.047") X 31H | |
| 1.4 mm (.055") X 32H | |
| 1.4 mm (.055") X 31H | |
| 1.6 mm (.063") X 32H | |
| 1.8 mm (.070”) X 32H | |
| 1.2 mm (.047”) X 39H | |
| 1.4 mm (.055”) X 39H |
Heavy (70-160 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.4 mm (.055") X 32H | |
| 1.4 mm (.055") X 31H | |
| 1.6 mm (.063") X 32H | |
| 1.8 mm (.070") X 32H |
Round Spray
Thin (5-25 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.2 mm (.047") X 16 |
Medium (25-70 Centipoise)
| Trophy Setup Part Number | Fluid Nozzle & Air Cap |
| 1.2 mm (.047") X 16 |
| Item No. | Description | Part No. |
| 1 | Air Cap Ring Assembly | |
| 5 | Air Cap | See Chart |
| 6 | Spring Clip (kit of 10) | |
| 7 | Fluid Nozzle | See Chart |
| 8 | Separator/Baffle (kit of 3) | |
| 9 | Side Part Assembly | |
| 10 | Side Port Retaining Clip | - |
| 11 | Side Port Valve Body | - |
| 12 | Side Port O-Ring Ø 4.8 x 1.6 | - |
| 13 | Side Port Knob and Stem | - |
| 14 | Side Port Pin | - |
| 15 | Piston Cap | |
| 16 | Piston Spring | |
| 17 | Piston Assembly | |
| 18 | O-Ring, Inside Piston | - |
| 19 | O-Ring, Outside Piston | - |
| 20 | O-Ring, Inside Piston | - |
| 21 | Piston | - |
| 22 | Needle, Stainless, Marking: I (Standard) | |
| 22 | Needle, Tungsten Carbide, Marking: II | |
| 22 | Needle, Plastic, Marking: III | |
| 22 | Needle Feathering | See Chart |
| 23 | Spring/Pad Needle Assembly | |
| 24 | Needle Adjusting Knob | |
| 25 | Packing Cartridge Assembly | |
| 26 | Needle Packing, Green (kit of 3) | |
| 27 | O-Ring, Outside Cartridge | - |
| 28 | Packing Body | - |
| 29 | O-Ring, Inside Cartridge | - |
| 30 | Packing Screw (kit of 3) | |
| 31 | Set Screw, Mounting | |
| 32 | Gun Body Assembly with Insert | - |
| 33 | Fitting, Air Connection, 1/4" NPS | |
| 34 | Plug, Recirculating Fluid Inlet, 1/4" Hex (kit of 3) | |
| 35 | Gunner's Mate (3 CC Bag) | - |
| 36 | Gun Brush | |
| 37 | Recirculating Fitting, 3/8" NPS (F) | |
| 38 | Remote Fan Control Fitting Assembly, 1/4" NPS/BSPP(M) |
Repair Kits
| Includes Items | Description | Part Number |
| 10, 12, 14 | Side Port Kit | |
| 18, 19, 20 | Kit | |
| 23 | Optional Heavy Duty Spring | |
| 27, 29 | Kit |
Stainless Steel Hardened Fluid Nozzles
| Nozzle Orifice Size | Part No. |
| .020" / .50 mm | |
| .035" / .85 mm | |
| .039" / 1.0 mm | |
| .047" / 1.2 mm | |
| .055" / 1.4 mm | |
| .063" / 1.6 mm | |
| .071" / 1.8 mm | |
| .079" / 2.0 mm | |
| .087" / 2.2 mm | |
| .102" / 2.6 mm |
Stainless Steel Feathering Needles and Nozzles
| Part No. | Marking on Needle | Matching Nozzle |
| I IIII | 45-11050-12 1.2MM (.047") | |
| II IIII | 45-11050-14 1.4MM (.055") | |
| III IIII | 45-11050-18 1.8MM (.071") |
Tungsten Carbide Needles and Nozzles
| New Column | New Column | New Column |
| 1.4 MM (.055") | ||
| 1.8 MM (.071") | ||
| 2.2 MM (.086") | ||
| 2.6 MM (.102") |
| Feature | Specification |
| Maximum Air Pressure | 140 psi / 9.6 bar (P-1) |
| Maximum Fluid Pressure | 140 psi / 9.6 bar (P-2) |
| Cylinder Air Pressure to | 65 psi / 4.5 bar |
| Gun Body | Anodized Aluminum |
| Fluid Path | Stainless Steel |
| Fluid Inlet Size | 3/8" NPS / BSP(m) |
| Air Inlet Size | 1/4" NPS / BSP(m) |
| Gun Weight | 20.8 oz. / 590 grams |
| Wetted Parts | Stainless Steel & UHMWPE |
| Gun Mounting Hole | 1/2" diameter |
| Trophy Automatic Manual | Trophy Brochure |
| | |