The 36-815 is the standard C.A. Technologies 36-series air-assist-airless fluid tip — a 0.015” carbide orifice at a 80° spray angle for an approximately 16” fan. Sized for primers, sealers, and higher-output finishing.

Fluid delivery is approximately 22 oz/min at 1000 PSI on light materials. The carbide orifice resists wear from abrasive coatings, holding pattern shape and finish quality far longer than steel. It is the general-production workhorse at this size.

Every 36-series tip fits the C.A. Technologies Bobcat, Cougar, and Bobcat Automatic AAA guns and is a direct Kremlin™ MX / MVX cross-reference — see the full size chart below to change angle or orifice.

Fine-Finish Option

Need a softer break-up for show-surface topcoats? Many sizes offer a fine-finish “F” Opti-Tip version — see the cross-link above or call CET.

How do I read the tip number?

The first digit is the spray angle × 10 (8 → 80°); the last two digits are the orifice in thousandths of an inch (15 → 0.015”). So 36-815 sprays a 16” fan at 0.015”.

Will it fit my Kremlin™ gun?

Yes — 36-815 is the direct C.A. Technologies cross-reference for Kremlin™ 12-17 and drops into MX and MVX AAA guns.

Standard or fine-finish (F)?

This is the standard production tip — the workhorse for general finishing at this size.

Do I need a tip screen?

A 36-100 tip screen behind the tip catches debris before the orifice and prevents spits — recommended on every tip change.