Binks 2.5 Gallon Tanks
- Information
- Versions
- Spare Parts
- Specifications
- Literature
Binks Pressure Feed Tanks
Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure. The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure) and safety pressure relief valves. Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation. Binks Pressure Feed Containers are constructed from the highest grade materials and fully comply with European and Global pressure regulations including PED, ATEX and ASME.
Features:
- Fully approved and CE marked to the latest pressure equipment directive 97/23/EC
- Constructed from Heavy Gauge steel with forged steel clamps
- St St & Carbon Steel Plated range covers all industrial applications
- Higher pressure rating handles heavier materials
- Range offers complete material handling suitability for solvent and waterborne coatings
- Inner Liners reduce cleaning time and save coating material
- Top and Bottom outlet conversion kits available
- Single air regulator as standard with optional dual outlet kits
Versions
Galvanized
| Tank Sku | Regulation | Agitation |
| None | None | |
| Single (Regulated air to tank only) | None | |
| Single (Regulated air to tank only) | Direct Drive | |
| Single (Regulated air to tank only) | Gear-reduced (Heavy-duty) | |
| Double (Regulated air to tank and gun) | None | |
| Double (Regulated air to tank and gun) | Direct Drive | |
| Double (Regulated air to tank and gun) | Gear-reduced (Heavy-duty) | |
| Extra Sensitive | None | |
| Extra Sensitive | Direct Drive | |
| Extra Sensitive | Gear-reduced (Heavy-duty) | |
| Extra Sensitive w/ gun regulation | None | |
| Extra Sensitive w/ gun regulation | Direct Drive | |
| Extra Sensitive w/ gun regulation | Gear-reduced (Heavy-duty) |
Stainless Steel
| Tank Sku | Regulation | Agitation |
| None | None | |
| Single (Regulated air to tank only) | None | |
| Single (Regulated air to tank only) | Direct Drive | |
| Single (Regulated air to tank only) | Gear-reduced (Heavy-duty) | |
| Double (Regulated air to tank and gun) | None | |
| Double (Regulated air to tank and gun) | Direct Drive | |
| Double (Regulated air to tank and gun) | Gear-reduced (Heavy-duty) | |
| Extra Sensitive | None | |
| Extra Sensitive | Direct Drive | |
| Extra Sensitive | Gear-reduced (Heavy-duty) | |
| Extra Sensitive w/ gun regulation | None | |
| Extra Sensitive w/ gun regulation | Direct Drive | |
| Extra Sensitive w/ gun regulation | Gear-reduced (Heavy-duty) |
| Item No. | Galvanized | Stainless | Description |
| 1 | Handle | ||
| 2 | Plug (Non-agitated models only) | ||
| 3 | O-ring (kit of 2) | ||
| 4 | Air manifold | ||
| 5 | Air relief valve 1/4 NPT-M | ||
| 6 | TIA-5110 | TIA-5110 | Safety valve assy, 110 PSI |
| 6A | Safety valve assy, 40 PSI (extra sensitive only) | ||
| 7 | - (Brass) | SSP-1939 (S.S.) | STR elbow (3/8-18) |
| 8 | Ball valve 3/8 NPS outlet | ||
| 9 | Fill port cap (incl item in 10) | ||
| 10 | Fill port cap gasket (5 pack) | ||
| 11 | Tank lid | ||
| 12 | SSP-1439-ZN | Plug (1/2-14) | |
| 13 | Tank gasket 2 gal | ||
| 14 | Fluid tube (dir drive agi) | ||
| 15 | Fluid tube (gear reduced agit) | ||
| 16 | - | - | Clamp (see item 20) |
| 17 | Thumb screw (see item 20) | ||
| 18 | - | - | Clevis pin (see item 20) |
| 19 | - | - | Cottere pin, 1/8 DIA. x1" LG. (see item 20) |
| 20 | Clamp, pin and screw kit (incl. 16, 17, 18 and 19) | ||
| 21 | Disposable tank liner (10 or 60) | ||
| 22 | Tank and lug assy. | ||
| 23 | - | - | Bottom plug |
| 24 | Air motor assy | ||
| 25 | HAV-500-B | HAV-500-B | Air adjusting valve |
| 26 | TextNipple 1/4 NPS x 1/4 NPT | ||
| 27 | - | - | Street elbow (1/4-18 NPT, brass) |
| 28 | - | - | Set screw (1/4-20 x 1/4) |
| 29 | - | - | Adapter (see item 30) |
| 30 | Seal retainer kit (incl 28, 29, 34, 35) | ||
| 31 | - | - | Shaft seal 1/2 I.D. (dir. drive agit) |
| 32 | - | - | Internal retaining ring (dir. drive agit.) |
| 33 | Shaft seal kit (dr. drive agit) | ||
| 34 | - | - | Set screw (1/4-20 x 1/4) S.S. |
| 35 | - | - | Shaft coupling (see item 30) |
| 36 | Agitator shaft | ||
| 37 | - | - | SQ HD set screw, 1/4-20 x 3/8, S.S. |
| 38 | - | - | Propellor |
| 39 | Agitatorpropeller kit (dir. drive) | ||
| 40 | Retaining nut | ||
| 41 | Thrust washer (kit of 2/ea) | ||
| 42 | - | - | Thrust collar |
| 43 | - | - | Set screw, 5/16-18 x 3/8 |
| 44 | Thrust collar kit (incl. 42 and 43) | ||
| 45 | Bearing assy. | ||
| 46 | - | - | Shaft seal 5/8 I.D. (gear reduced agit) |
| 47 | - | - | Iternal retaining ring (gear reduced agit) |
| 48 | Shaft seal kit (gear reduced agit) | ||
| 49 | QMG-15 | Agitator shaft | |
| 50 | - | - | Agitator paddle kit |
| 51 | - | - | SOC HD cap screw, 5/16-18 x 1-1/4, S.S. |
| 52 | Agitator paddle kit (incl. 51 and 52) | ||
| 53 | Air motor/gearbox drive | ||
| 54 | Air hose assy | ||
| 55 | Swivel elbow | ||
| 56 | See below | See below | Air control |
| 57 | - | - | Plug, 3/8 NPT, SS (not shown) for use only with bottom outlet kit. Replaceds items 7 and 8. |
Repair Kits
Accessories
| Part No. | Description |
| Bottom outlet kit | |
| Fluid strainer | |
| Filter, Regulator Assy. 50 CFM Filter, Regulator Assy. 80 CFM | |
| Disposable tank liner, kit of 10 Disposable tank liner, kit of 60 | |
| Kit of 20 strainers, 200 micron Kit of 20 strainers, 400 micron Kit of 20 strainers, 600 micron |
| Value | Galvanized | Stainless |
| Maximum Working Pressure | 110 psi | 110 psi |
| Tank Shell | SA-414 Steel, Galvanized (Zinc) | 304 Stainless Steel |
| Tank Lid | SA-414 Steel, Galvanized (Zinc) | 304 Stainless Steel |
| Fluid Tube | 3/8 in. Steel Pipe, Galvanized | 3/8 in. SS Pipe, 316 Stainless Steel |
| Fluid Outlet (Elbow) | Steel, Zinc Plate | 316 Stainless Steel |
| Fluid Valve, Outlet | Brass, Nickel Plate 3/8-18 NPS(M) | 316 Stainless Steel 3/8-18 NPS(M) |
| Agitator Paddle/Propeller | Nylon, Glass Filled | Nylon, Glass Filled |
| Agitator Shaft | Steel, Zinc Plate | 303 Stainless Steel |
| Agitator Shaft Seal | Engineered PTFE, Stainless Steel | Engineered PTFE, Stainless Steel |
| Air Manifold | Steel, Zinc Plate | Steel, Zinc Plate |
| Plug (Air Manifold Coupling) | Steel, Zinc Plate | 18-8 Stainless Steel |
| Bottom Outlet (Optional Kit) | 304 Stainless Steel 3/4-14 NPS(M) | 304 Stainless Steel 3/4-14 NPS(M) |
| Manual | Brochure |
| | |