C.A. Technologies · Air Assist Airless · Authorized Distributor
Ultra-fine atomization and high-volume fluid delivery for wood, metal, and general finishing — built on an all-stainless fluid section that runs solvent or waterborne coatings. Configure by mount, gun, coating, and fluid tip.
Questions on gun or tip selection? CET’s technical team will spec the mount, gun, and tip for your coating. 586-210-0555 sales@cetinc.com
Shop by Mount
Three ways to set up the same PEAK Performance pump. Every outfit shares the pump — choose the mount, then the gun, coating, and fluid tip.
Overview
The C.A. Technologies PEAK Performance Series pairs a completely redesigned air motor with an all-stainless fluid section. Air-assist-airless combines airless and HVLP atomization for a soft, highly atomized pattern with minimal overspray and excellent transfer efficiency — the finish quality of air spray at the production speed of airless.
Every PEAK outfit shares the same pump; you choose how it is mounted, which spray gun it carries, whether it is set up for solvent or waterborne coatings, and the fluid tip for your material.
Inside Every PEAK
Choose Your Gun
Every outfit ships less air cap and fluid tip so you match the tip to your coating. All three guns are air-assist-airless.
Fluid Tips
Outfits ship less tip so you match orifice and fan width to your coating. Tip code = spray angle (first digit × 10) + orifice (last two, thousandths) — 413 = 8" fan, 0.013" orifice. The full 36-series chart with the Kremlin™ cross-reference lives in the tips category.
Repair kits, seals, tips, and full breakdowns for the Bobcat (B14) and Cougar (C14) PEAK pumps.
Not sure which PEAK outfit fits your shop? Call or text 586-210-0555 or email sales@cetinc.com — CET’s technical team will spec the mount, gun, and tip for your coating.
