DeVilbiss Advance HD Pressure Feed HVLP Spray Gun Kit (ADV-P507-14)

The DeVilbiss Advance HD Pressure Feed HVLP Spray Gun Kit (ADV-P507-14) is a mid-sized industrial spray gun configured for pressure-feed operation with HVLP compliant atomization. This kit includes the Advance HD pressure-feed gun body with the No. 507 HVLP air cap and a 1.4mm stainless steel fluid tip and needle. Gun only — no cup included. The 507 HVLP cap paired with the 1.4mm nozzle delivers wide-fan HVLP-compliant coverage with controlled fluid output — a refined configuration that prioritizes atomization quality and finish smoothness over raw material throughput.

What's in the Kit

The ADV-P507-14 ships with the Advance HD pressure-feed gun body, No. 507 HVLP air cap, and 1.4mm stainless steel fluid tip and needle. The pressure-feed configuration connects to external fluid supply systems including pressure tanks, remote cups, and recirculating lines. The gun features a 1/4" universal thread air inlet and a 3/8" universal thread fluid inlet (both accept BSP and NPS connectors). Optional accessories include the stainless steel fluid filter kit (VSA-512), tungsten carbide or hardened tips and needles for abrasive materials, and nylon tipped needles for reactive coatings. Hardened and tungsten carbide options are available in the 1.4mm size. A nylon tipped needle variant is also available as part number ADV-P507-14N for materials sensitive to metal contact or prone to tip dry.

No. 507 HVLP Air Cap Performance

The No. 507 HVLP air cap operates at a recommended inlet pressure of 22 psi (1.5 bar) with an air consumption of 17.3 scfm (490 L/min) and produces a fan pattern of approximately 400mm (15.7"). The 507 is the high-capacity HVLP cap in the DeVilbiss compliant range — it delivers the widest fan pattern available in HVLP with high air volume for fast coverage on large surfaces, all while operating at 0.7 bar (10 psi) at the cap to meet HVLP compliance requirements. The 1.4mm fluid tip provides a controlled mid-range fluid delivery that produces a high air-to-fluid ratio with the 507's wide fan, resulting in fine atomization and smooth film builds. This configuration is well-suited for finish topcoats, light enamels, sealers, stains, and medium-viscosity coatings where surface quality is the primary concern.

Why Pressure Feed

Pressure-feed spray guns deliver material from an external pressurized source rather than a gravity or suction cup. This eliminates the weight of a cup on the gun body, reducing operator fatigue on long spray sessions. More importantly, pressure feed enables continuous material supply without stopping to refill — a critical advantage in high-volume production, large-panel work, and applications where consistent fluid delivery is needed regardless of gun angle or orientation. The Advance HD pressure-feed body maintains the same high-capacity air passages and balanced air valve as the gravity and suction versions for identical atomization quality.

Built for High-Demand Industrial Finishing

The Advance HD achieves superior atomization through high-capacity air passages and a separate balanced air valve that provides unrestricted airflow through the gun body. The heavily anodized aluminum alloy construction is built for durability in demanding production environments. Stainless steel fluid tips, needles, and passageways come standard for compatibility with both solvent-based and waterborne materials. The gun is CE marked and fully ATEX approved for use in hazardous atmospheres.

Ergonomic Design for Reduced Operator Fatigue

The Advance HD features a contoured handle design that greatly reduces RSI and operator fatigue during extended spray sessions. Increased finger space, lighter trigger pull tension, reduced trigger travel, and a self-adjusting PTFE needle packing assembly all contribute to a gun that is comfortable to use shift after shift. The built-in air inlet adjuster "cheater" valve provides at-the-gun pressure control for quick adjustments without leaving the spray area.

Buy DeVilbiss Advance HD Spray Guns from CET

Coating Equipment Technology, Inc. (CET) is a factory-authorized DeVilbiss industrial distributor located in Clinton Township, Michigan, serving professional finishing operations since 1964. Contact us at 586-210-0555 (call or text) for technical assistance, air cap selection guidance, or to place your order.