DeVilbiss Advance HD Pressure Feed Trans-Tech Spray Gun Kit (ADV-P510-14)

The DeVilbiss Advance HD Pressure Feed Trans-Tech Spray Gun Kit (ADV-P510-14) is a mid-sized industrial spray gun configured for pressure-feed operation with Trans-Tech compliant atomization and low air consumption. This kit includes the Advance HD pressure-feed gun body with the No. 510 Trans-Tech air cap and a 1.4mm stainless steel fluid tip and needle. Gun only — no cup included. The 510 Trans-Tech cap paired with the 1.4mm nozzle is a controlled-output configuration that delivers quality atomization with minimal compressed air demand — well-suited for fine to medium-viscosity coatings where finish quality and air efficiency take priority over raw production speed.

What's in the Kit

The ADV-P510-14 ships with the Advance HD pressure-feed gun body, No. 510 Trans-Tech air cap, and 1.4mm stainless steel fluid tip and needle. The pressure-feed configuration connects to external fluid supply systems including pressure tanks, remote cups, and recirculating lines. The gun features a 1/4" universal thread air inlet and a 3/8" universal thread fluid inlet (both accept BSP and NPS connectors). Optional accessories include the stainless steel fluid filter kit (VSA-512) and tungsten carbide or hardened tips and needles for abrasive materials. Hardened and tungsten carbide options are available in the 1.4mm size.

No. 510 Trans-Tech Air Cap Performance

The No. 510 Trans-Tech air cap operates at a recommended inlet pressure of 29 psi (2.0 bar) with an air consumption of just 10.0 scfm (283 L/min) and produces a typical fan pattern of approximately 270mm (10.6"). The 510 is the most air-efficient full-fan Trans-Tech cap in the Advance HD range, consuming significantly less compressed air than the higher-capacity 513 or 522 caps while still delivering compliant-level transfer efficiency. The 1.4mm fluid tip paired with the 510's moderate fan width produces a well-atomized, controlled spray pattern ideal for finish topcoats, light enamels, sealers, stains, and medium-viscosity protective coatings. This combination is an excellent choice for facilities running smaller compressors, multi-gun setups sharing a single air supply, or applications where energy costs and material savings are both priorities.

Why Pressure Feed

Pressure-feed spray guns deliver material from an external pressurized source rather than a gravity or suction cup. This eliminates the weight of a cup on the gun body, reducing operator fatigue on long spray sessions. More importantly, pressure feed enables continuous material supply without stopping to refill — a critical advantage in high-volume production, large-panel work, and applications where consistent fluid delivery is needed regardless of gun angle or orientation. The Advance HD pressure-feed body maintains the same high-capacity air passages and balanced air valve as the gravity and suction versions for identical atomization quality.

Built for High-Demand Industrial Finishing

The Advance HD achieves superior atomization through high-capacity air passages and a separate balanced air valve that provides unrestricted airflow through the gun body. The heavily anodized aluminum alloy construction is built for durability in demanding production environments. Stainless steel fluid tips, needles, and passageways come standard for compatibility with both solvent-based and waterborne materials. The gun is CE marked and fully ATEX approved for use in hazardous atmospheres.

Ergonomic Design for Reduced Operator Fatigue

The Advance HD features a contoured handle design that greatly reduces RSI and operator fatigue during extended spray sessions. Increased finger space, lighter trigger pull tension, reduced trigger travel, and a self-adjusting PTFE needle packing assembly all contribute to a gun that is comfortable to use shift after shift. The built-in air inlet adjuster "cheater" valve provides at-the-gun pressure control for quick adjustments without leaving the spray area.

Buy DeVilbiss Advance HD Spray Guns from CET

Coating Equipment Technology, Inc. (CET) is a factory-authorized DeVilbiss industrial distributor located in Clinton Township, Michigan, serving professional finishing operations since 1964. Contact us at 586-210-0555 (call or text) for technical assistance, air cap selection guidance, or to place your order.