null

AutoCAT A300H Spare Parts and Manual

(Showing 47 of 47)

 a300h-spare-parts.png

 Item No.  Part No.  Description
 1  See Air Cap Chart  Air Cap
 3  See Air Cap Chart  Fluid Tip
 4  33-1201  Fluid Nozzle Body
 5  98-8026  O-Ring (Teflon)
 6

 60-L31H

 60-A31H-R

 Nozzle Body Carrier (Standard)

 Nozzle Body Carrier (Recirculating)
 7  60-34H  Air Cap Adapter
 8  60-131  O-Ring (Teflon)
 9  60-614  Mounting Rod
 10  98-0115  Locknut (3/8-16)
 11  60-621  AutoCAT Gun Body HVLP
 12  60-136  Plug
 13  98-8108  O-Ring (Teflon)
 14  98-0108  Circlip
 15  60-605  Fan Control Housing
 16  60-606  Fan Control Stem
 17  See Air Cap Chart  Fan Control Orifice
 18  60-1400  Needle Seal Assembly*
 19  60-604  Seal Cap
 20  98-8006  O-Ring (Teflon)
 21  98-7006  O-Ring (Viton) 2 Required
 22  60-603  Air Control Spool
 23  98-7014  O-Ring (Viton) 2 Required
 24  98-7027  O-Ring (Viton) 2 Required
 25  60-124  Seal
 26  60-128  Locknut
 27  60-126  Fluid Inlet
 28  98-8010  O-Ring (Teflon)
 29  60-602  Piston
 30  98-7217  O-Ring (Viton)
 31  66-246  Piston Return Spring
 32  60-601  End Cap
 33  See Air Cap Chart  Needle Assembly
 34  60-613  Needle Return Spring
 35  60-612  Locknut - Fluid Control Knob
 36  60-608  Fluid Control Knob
 37  53-551 (Not Shown)  Cylinder Air Fitting 1/8 NPT x 1/4 NPS
 38  53-552 (Not Shown)  Atomz. Air Fitting 1/4 NPT x 1/4 NPT

 Air Cap, Nozzle and Needle

 Material Type  Fluid Orifice x   Air Cap  Maximum Pattern   Width   Pressure /   Siphon

 Very Thin

 less than 16 sec. Zahn #2

 inks , dyes, solvents, stains

  1.0mm x 1010

 12

  P

 Thin

 16 to 20 sec. Zahn #2

 lacquers, enamels, primers, sealers

 1.0mm x 1010

 1.3mm x 1013

 12

 12

 P

 P 

 Medium

 21 to 30 sec. Zahn #2

 automotive base coat enamels, primers, epoxies, urethanes,   automotive clear coat

 1.3mm x 1013

 1.5mm x 1015

 1.7mm x 1017

 12

 12

 12

 12

 P

 P

 P 

 Heavy

 over 30 sec. Zahn #2

 heavy body primers, high solid enamels, high solid automotive   coatings, adhesives

 1.5mm x 1015

 1.7mm x 1017

 1.9mm x 1019

 2.2mm x 1022

 12

 12

 12

 12

 P

 P

 P

 P
 Air   Caps  Pressure /  Siphon  Max gun Inlet Pressure for HVLP (45 if Using   Optional Regulator)  Fan Control   Orifice  SCFM @ Max   Gun Inlet  Air Cap   Ring
 23-   1008  Pressure  40  60-617  13.5  Included
 23-   1010  Pressure  40  60-617  13.5  Included
 23-   1012  Pressure  40  60-617  13.5  Included
 23-   1013  Pressure  40  60-617  13.5  Included
 20-   1014  Pressure  40  60-617  13.5  Included
 23-   1015  Pressure  40  60-617  13.5  Included
 23-   1017  Pressure  40  60-617  13.5  Included
 23-   1019  Pressure  40  60-617  13.5  Included
 23-   1022  Pressure  40  60-617  13.5  Included
 Available Fluid Nozzle Tips  Needles / Marking on Needle
 33-0208 0.8mm (.022")  40-A308 (308)
 33-0210 1.0mm (.040")  40-A310 (310)
 33-0212 1.2mm (.046")  40-A312 (312)
 33-0213 1.3mm (.052")  40-A313 (313)
 33-0214 1.4mm (.055")  40-A314 (314)
 33-0215 1.5mm (.059")  40-A315 (315)
 33-0217 1.7mm (.070")  40-A317 (317)
 33-0219 1.9mm (.075")  40-A319 (319)
 33-0222 2.2mm (.086")  40-A322 (322)

 

 

Show 12 24 36