Coating Equipment Technology · Authorized Binks Distributor · Clinton Township, MI
Start with confidence. Finish with a Trophy.
One professional spray gun platform. Three atomization technologies.
Conventional · HVLP · LVMP — in gravity, pressure & siphon feed.
Conventional
HVLP
LVMPThe Trophy Platform
Whatever size job or part you’re finishing — whatever material you’re spraying — the Binks Trophy Series gives you the technology and confidence to handle it. The Trophy platform delivers all the utility and versatility you need to build a production plan and execute it with complete confidence, on coatings ranging from waterborne basecoats to high-solids industrial enamels.
Every Trophy gun can be configured with the appropriate needle, nozzle and air cap to match the coating, the size of the part and the surface being finished. Choose your atomization technology — Conventional, HVLP or LVMP — and your feed setup, and CET ships it as an authorized Binks distributor with full technical support, genuine spare parts, and documentation.
Platform Advantages
Three Atomization Technologies
Conventional, HVLP and LVMP air caps on one common gun body — match transfer efficiency, air supply and finish quality to the job in front of you.
Full Nozzle Range
Fluid nozzles from 0.85mm up to 2.6mm cover everything from fine metallics and clears to heavy high-build primers, adhesives and vitreous enamels.
Gravity, Pressure & Siphon
The same Trophy platform is available in gravity feed, pressure feed and siphon-cup configurations to suit your material delivery and shop setup.
Balanced, Ergonomic Design
A lightweight, well-balanced body with smooth trigger pull and easy fluid & fan controls keeps painters productive through long production shifts.
Easy to Service
Field-serviceable design with readily available repair kits, needles, nozzles and air caps keeps every Trophy gun in production for years.
Full Spare Parts Support
CET stocks the complete Trophy spare parts range — service kits, needles, nozzles, air caps and accessories for gravity, pressure and siphon guns.
Choose Your Technology
Pick the atomization technology that matches your transfer-efficiency targets, air supply and finish quality. Each is available in multiple nozzle sizes and feed types.
Side by Side
| Conventional | HVLP | LVMP | |
|---|---|---|---|
| Best For | Finest atomization & speed; high-build & specialty coatings | Compliant refinishing; max material savings | All-round balance; lower air consumption |
| Air Caps | 11-C · 12-C · 14-C · 16 | 31-H · 32-H · 33-H · 39-H | 22-L · 23-L · 25-L |
| Nozzle Range | 1.0 – 2.6mm | 0.85 – 1.8mm | 0.85 – 1.8mm |
| Transfer Efficiency | Standard | High (compliant) | High |
| Air Consumption | Higher | Higher | Lower |
| Feed Types | Gravity · Pressure · Siphon | Gravity · Pressure · Siphon | Gravity · Pressure · Siphon |
Tip: Air caps, fluid nozzles and needles are matched sets within each technology — Conventional (C), HVLP (H) and LVMP (L) parts are not interchangeable. Always order the air cap, nozzle and needle as a set for your gun. Not sure which setup fits your coating? Contact CET at 586-210-0555 and we’ll spec it for you.
Decision Guide
Choose Conventional if…
You have ample compressed air and want the finest atomization and fastest application — especially on high-build primers, adhesives, high-solids and specialty coatings like vitreous enamel. Transfer efficiency is a secondary concern to finish quality and speed.
Nozzles run up to 2.6mm for the heaviest materials.
Choose HVLP if…
You need a compliant gun and want to maximize material savings and minimize overspray. HVLP’s high transfer efficiency reduces waste and meets emissions requirements — the standard choice for production automotive and general refinishing.
Available in gravity (2466-HV1) and pressure (2465-HV1) feed.
Choose LVMP if…
You want high transfer efficiency and a fine finish but have limited compressed air, or you want faster application than HVLP. LVMP delivers the best all-round balance of quality, speed and air economy.
Available in gravity (2466-LV1) and pressure (2465-LV1) feed.
See It In Action
About CET
Coating Equipment Technology, Inc. is a factory-authorized Binks distributor based in Clinton Township, MI, with roots in the finishing industry going back to 1964. CET carries the complete Trophy lineup — every nozzle size, air cap and feed configuration across Conventional, HVLP and LVMP — plus the full spare parts and manual library.
Our technical team will confirm the right gun, cap, nozzle and needle for your coating and shop before you order.
Call or Text
586-210-0555
sales@cetinc.com
Location
44432 Reynolds Drive
Clinton Township, MI 48036
Exploded diagrams, all part numbers, air-cap charts, pressure settings & service instructions for every Trophy gun.
