There are no products listed under this category.
| Item No. | Part No. | Description |
| 1 | 54-6120 | Air Cap Retaining Ring Assembly |
| 5 | See Charts on Page 7 | Air Cap |
| 6 | JGA-156-K10 | Spring-Clip (Kit of 10) |
| 7 | See Chart | Fluid Nozzle |
| 8 | 54-6102-K3 | Baffle/Separator (Kit of 3) |
| 9 | 54-6122 | Side Port Valve Assembly |
| 10 | -- | Retaining Clip |
| 11 | -- | Body Bushing |
| 12 | -- | O-Ring |
| 13 | -- | Side Port Stem |
| 14 | -- | Pin |
| 15 | 54-6131-K | Air Valve Service Kit |
| 16 | -- | Front Seal - Air Valve |
| 17 | -- | Front Air Valve Seal |
| 18 | 54-6109 | Air Valve Spindle |
| 19 | -- | Air Valve Spring |
| 20 | -- | Rear Seal - Air Valve |
| 21 | SN-66 | Housing |
| 22 | 47-6825 | Needle - Stainless Steel (STD.) |
| 23 | -- | Spring/Pad Assembly |
| 23 | 54-6133-K3 | Spring/Pad Assembly (Kit of 3) |
| 24 | 54-6111 | Knob - Needle Adjusting |
| 25 | 54-6130-K | Needle Packing Kit (Standard) |
| 26 | -- | Nut - Packing |
| 27 | -- | Spring for Packing |
| 28 | -- | Needle Packing (Standard) |
| 29 | 54-4360 | Trigger |
| 30 | 54-6132-K | Trigger Screw Nut Kit |
| 31 | -- | Trigger Screw |
| 32 | -- | Trigger Nut |
| 33 | 54-3513 | Spindle Cap |
| 34 | SN-11 | Plug |
| 35 | 54-6112 | Fitting - Air Inlet |
| 36 | -- | Gun Body with Fluid Inlet |
| 37 | -- | Tool - Seal Insertion |
| 38 | -- | Gunner's Mate (3 CC Bag) |
| 54-6122 | 10, 11, 12, 13, 14 |
| 54-6130-K | 26, 27, 28 |
| SN-2-K3 | 28 |
| 54-6131-K | 16, 17, 19, 20 |
| 54-6132-K | 31, 32 |
| GTI-428-K5 | 10, 12, 14 |
| 54-6135 | 15, 18, 23, 28 |
| Stainless Fluid Nozzle | Orifice Size | Fluid Nozzle Part Number |
| .039" | 1.0mm | 45-11050-10 |
| .047" | 1.2mm | 45-11050-12 |
| .055" | 1.4mm | 45-11050-14 |
| .063" | 1.6mm | 45-11050-16 |
| .071" | 1.8mm | 45-11050-18 |
| Conventional | |
| 54-6141-K | 12-C Kit |
| LVMP | |
| 54-6147-K | 23-L Kit |
| HVLP | |
| 54-6152-K | 32-H Kit - HVLP |
| Type of Fluid to be Sprayed | Complete Gun Assembly Part No. | Fluid Nozzle and Air Cap |
|
THIN 5-25 CENTIPOISE 15-19 sec. Zahn 2 cup wash primers, dyes, stains, solvents, water, inks, sealers, laquers, lubricants, zinc chromates, acrylics |
2466-14CN-12SG | 1.4 mm (.055") X 12C |
| THIN
5-25 CENTIPOISE 15-19 sec. Zahn 2 cup wash primers, dyes, stains, solvents, water, inks, sealers, laquers, lubricants, zinc chromates, acrylics |
2466-16CN-12SG | 1.6 mm (.063") X 12C |
|
MEDIUM 25-70 CENTIPOISE 20-30 sec. Zahn 2 cup synthetic enamels, varnishes, shellacs, fillers, primers, epoxies, urethanes, lubricants, wax emulsions, enamels |
2466-16CN-12SG | 1.6 mm (.063") X 12C |
| MEDIUM
25-70 CENTIPOISE 20-30 sec. Zahn 2 cup synthetic enamels, varnishes, shellacs, fillers, primers, epoxies, urethanes, lubricants, wax emulsions, enamels |
2466-18CN-12SG | 1.8 mm (.070") X 12C |
| Type of Fluid to be Sprayed | Complete Gun Assembly Part No. | Fluid Nozzle and Air Cap |
|
THIN 5-25 CENTIPOISE 15-19 sec. Zahn 2 cup wash primers, dyes, stains, solvents, water, inks, sealers, laquers, lubricants, zinc chromates, acrylics |
2466-12LV-23SG | 1.2 mm (.067") X 23L |
|
THIN 5-25 CENTIPOISE 15-19 sec. Zahn 2 cup wash primers, dyes, stains, solvents, water, inks, sealers, laquers, lubricants, zinc chromates, acrylics |
2466-14LV-23SG | 1.4 mm (.055") X 23L |
|
MEDIUM 25-70 CENTIPOISE 20-30 sec. Zahn 2 cup synthetic enamels, varnishes, shellacs, fillers, primers, epoxies, urethanes, lubricants, wax emulsions, enamels |
2466-14LV-23SG | 1.4 mm (.055") X 23L |
|
MEDIUM 25-70 CENTIPOISE 20-30 sec. Zahn 2 cup synthetic enamels, varnishes, shellacs, fillers, primers, epoxies, urethanes, lubricants, wax emulsions, enamels |
2466-18LV-23SG | 1.8 mm (.070") X 23L |
| Type of Fluid to be Sprayed | Complete Gun Assembly Part No. | Fluid Nozzle and Air Cap |
|
THIN 5-25 CENTIPOISE 15-19 sec. Zahn 2 cup wash primers, dyes, stains, solvents, water, inks, sealers, laquers, lubricants, zinc chromates, acrylics |
2466-12HV-32SG | 1.2 mm (.047") X 32H |
|
THIN 5-25 CENTIPOISE 15-19 sec. Zahn 2 cup wash primers, dyes, stains, solvents, water, inks, sealers, laquers, lubricants, zinc chromates, acrylics |
2466-14HV-32SG | 1.4 mm (.055") X 32H |
|
MEDIUM 25-70 CENTIPOISE 20-30 sec. Zahn 2 cup synthetic enamels, varnishes, shellacs, fillers, primers, epoxies, urethanes, lubricants, wax emulsions, enamels |
2466-14HV-32SG | 1.4 mm (.055") X 32H |
|
MEDIUM 25-70 CENTIPOISE 20-30 sec. Zahn 2 cup synthetic enamels, varnishes, shellacs, fillers, primers, epoxies, urethanes, lubricants, wax emulsions, enamels |
2466-18HV-32SG | 1.8 mm (.070") X 32H |
| Air Cap | Air Cap Part No. | Spray Pattern Range | CFM @ 30 PSI | CFM @ 50 PSI | CFM @ 70 PSI | Fluid Nozzle | Typical Coatings |
| 12 - C | 46-6501 | 4 - 12" | 8.3 | 12.1 | 14.2 | 45-11050 Series, 1.2mm - 1.8mm | Lacquers, Enamels, Top Coats, Low Viscosity Adhesives |
| Air Cap | Air Cap Part No. | Spray Pattern Range | CFM @ 30 PSI Gun Inlet (Dynamic) | Fluid Nozzle | Typical Coatings |
| 23 - L | 46-6511 | 4 - 12" | 10.6 | 45-11050 series, 1.2 mm – 1.8 mm | Lacquers, Enamels, Top Coats, Low Viscosity Adhesives |
| 24 - L | 46-6512 | 2 - 6" | 14.3 | 45-11050 series, 1.0 mm – 1.8 mm | Small Pattern Applications of Stains, Lacquers, Enamels, Acrylics |
| Air Cap | Air Cap Part No. | Spray Pattern Range | SCFM @ 10 PSI Cap Pressure (Dynamic) | Gun Inlet PSI @ 10 PSI at Air Cap (Dynamic) | Fluid Nozzle | Typical Coatings |
| 32 - H | 46-6518 | 8 - 14" | 15.5 | 26 | 45-11050 series, 1.2 mm – 1.8 mm | Lacquers, Enamels, Multi-Colors, Multi-Spec, Nonstick Coatings, Cut-Latex |
| Air Cap | Air Cap Part No. | Spray Pattern Range | CFM @ 30 PSI | CFM @ 50 PSI | CFM @ 70 PSI | Fluid Nozzle | Siphon or Pressure | Typical Coatings |
| 16 | 46-6505 | 2 - 4" | 5.6 | 7.8 | 10.5 | 45-11050 series, 1.0 mm - 1.8 mm | P, S | Lacquers, Enamels |
There are no products listed under this category.