Description
C.A. Technologies Jaguar 100C — J100C-15-2466-401 (1.5mm Nozzle, 2466 Air Cap)
The C.A. Technologies Jaguar 100C J100C-15-2466-401 is a 1.5mm gravity feed conventional spray gun paired with the 21-2466 air cap — the highest-SCFM, widest-fan configuration at 1.5mm in the J100C lineup. At 15 SCFM and a 13" fan, this setup delivers stronger atomization and broader coverage than the 2266 or 2366 caps at the same orifice size, making it the production choice for medium-viscosity automotive coatings, enamels, urethanes, and epoxies where panel coverage speed and atomization quality both matter. Forged aluminum body, all stainless steel fluid passages, 700mL aluminum cup included. US made. Call or text 586-210-0555.
✓ 1.5mm stainless orifice • ✓ Highest SCFM & widest fan at 1.5mm in J100C lineup • ✓ Gravity feed — 700mL aluminum cup included • ✓ 15 SCFM @ 50 PSI — 60-gallon compressor minimum • ✓ 13" max fan • ✓ US Made — CET Verified
Model: J100C-15-2466-401 • Nozzle: 1.5mm (.059") • Air Cap: 21-2466 • Feed: GRAVITY • SCFM: 15 @ 50 PSI
Cup: 51-401 700mL Aluminum (included) • Fan Control: 60-1500 (included) • Repair Kit: 10-105 • Max Inlet Pressure: 50 PSI • CET Verified Configuration
Overview
At a Glance
Specifications
Tech Specs
| Model | J100C-15-2466-401 |
| Fluid Nozzle | 31-0615 — 1.5mm (.059") 17-4PH Stainless |
| Air Cap | 21-2466 — Gravity, 15 SCFM @ 50 PSI |
| Needle | 40-1115 — Shared with 1.8mm configurations — one spare needle covers both orifice sizes |
| Feed Type | GRAVITY — 700mL aluminum cup included, no pressure supply required |
| Gravity Cup Included | 51-401 700mL Aluminum — ships with gun |
| Max Inlet Pressure | 50 PSI |
| Air Consumption | 15 SCFM @ 50 PSI — requires minimum 60-gallon compressor at 125 PSI rated output |
| Max Pattern Width | 13" — widest fan available at 1.5mm in the J100C lineup |
| Air Inlet | 1/4" NPS (m) — standard shop air fitting |
| Fluid Inlet | 16mm x 1.5mm (m) — gravity cup threads directly onto gun |
| Body | Forged Aluminum — 20 oz., lightweight for all-day use |
| Fluid Passages | All Stainless Steel — chemical resistance to automotive coatings, enamels, epoxies, and urethanes |
| Fan Control | 60-1500 (included) — adjusts fan width during application |
| Repair Kit | 10-105 — all seals, o-rings, needle seal, springs for a complete rebuild |
| Fulfillment | Most in-stock orders ship same day. Call or text 586-210-0555 to confirm availability. |
| Origin | US Made — C.A. Technologies (Louisville, CO) |
Application
CET Application Match — Best for This Setup
The CET Preferred Setup for 1.5mm applications where production speed and maximum fan width are the priorities. CET recommends J100C-15-2466-401 for production automotive refinishing and industrial finishing operations where the 2266 at 12 SCFM leaves performance on the table.
Common Questions
Frequently Asked Questions
- What is the difference between J100C-15-2466-401 and J100C-15-2266-401?
- Same 1.5mm orifice. The 2466 at 15 SCFM / 13" fan (60-gallon compressor) for production runs. The 2266 at 12 SCFM / 12" fan (30-gallon compressor) for most standard finishing. Choose 2466 when SCFM and fan width justify the higher compressor requirement.
- What compressor do I need?
- Minimum 60-gallon at 125 PSI rated output.
- What needle does the 1.5mm nozzle use?
- The 40-1115 (115) needle, shared with 1.8mm configurations.
- What repair kit does the Jaguar 100C use?
- All J100C configurations use repair kit 10-105, which includes all wear seals, o-rings, needle seal cartridge, and springs. CET stocks for same-day shipment — call or text 586-210-0555.
- Where can I find the full Jaguar 100C parts manual?
- Available on the Jaguar J100C Spare Parts page or via the download button below.
All Configurations
Find the Right Jaguar 100C for Your Application
The Jaguar 100C is available in 13 configurations covering 1.0mm through 2.8mm, with both stainless and carbide nozzle options. All configurations are CET Verified. Contact CET for a CET Application Match recommendation.
| Model | Nozzle | Air Cap | SCFM | Fan | Best For | Order |
|---|---|---|---|---|---|---|
| J100C-10-2266-401 | 1.0mm | 21-2266 | 12 | 12" | Thin — lacquers, enamels, sealers | Order |
| J100C-12-2266-401 | 1.2mm | 21-2266 | 12 | 12" | Thin-medium — lacquers, enamels, primers | Order |
| J100C-13-2266-401 | 1.3mm | 21-2266 | 12 | 12" | Medium — lacquers, primers, enamels | Order |
| J100C-13-2466-401 | 1.3mm | 21-2466 | 15 | 13" | Medium — wider fan, higher SCFM | Order |
| J100C-15-2266-401 | 1.5mm | 21-2266 | 12 | 12" | Medium — base coat, enamels, epoxies | Order |
| J100C-15-2366-401 | 1.5mm | 21-2366 | 12 | 10" | Medium — narrow fan, detail work | Order |
| J100C-15-2466-401 | 1.5mm | 21-2466 | 15 | 13" | Medium-heavy — enamels, urethanes, primers | Current |
| J100C-18-2266-401 | 1.8mm | 21-2266 | 12 | 12" | Medium-heavy — clear coat, epoxies | Order |
| J100C-18-2466-401 | 1.8mm | 21-2466 | 15 | 13" | Heavy — high solid coatings, gelcoat | Order |
| J100C-18-1590-401 | 1.8mm | 1590 | Low | — | Low CFM — sensitive substrates | Order |
| J100C-22-2467-401 | 2.2mm | 21-2467 | 15 | 14" | Heavy — heavy body primers, high solid enamels | Order |
| J100C-28-2268-401 | 2.8mm | 21-2268 | 15 | 14" | Ultra-heavy — gelcoat, C.A. Tech recommended | Order |
| J100C-28V-2268-401 | 2.8mm carbide | 21-2268 | 15 | 14" | Ultra-heavy — abrasive gelcoat, abrasive materials | Order |
Why Buy From CET
The CET Difference
- Over 20 years supplying industrial finishing equipment — CET has been matching customers to the right C.A. Technologies configuration since the beginning.
- Real technical support before and after the sale — call or text 586-210-0555 to reach CET’s technical team directly.
- Fast fulfillment on most in-stock orders — most orders ship same day from C.A. Technologies’ Colorado facility.
- Verified part compatibility — every configuration on this page is CET Verified. We stock the gun, the repair kit, the air caps, and the spare parts.
- Documentation included — every order ships with access to the full parts manual, air cap chart, and nozzle selection guide.
- The best order fulfillment in the industry — you receive updates at every step so you always know where your order is.
Why Choose the Jaguar 100C
Conventional Dependability Across Every Viscosity
The Jaguar 100C is C.A. Technologies’ workhorse conventional gravity feed gun — forged aluminum body, all stainless steel fluid passages, nine air cap options, and nozzles from 1.0mm to 2.8mm covering the full spectrum from thin lacquers to ultra-heavy gelcoat in a single platform.
- All stainless steel fluid passages: Full chemical resistance to lacquers, enamels, automotive coatings, and industrial topcoats.
- Gravity feed simplicity: Cup threads directly onto the gun. No pressure pot, no hose management.
- Carbide nozzle options: Available at 2.8mm for abrasive or particle-laden materials.
- Forged aluminum body at 20 oz.: Lightweight for extended finishing sessions.
- 13 active configurations: From 1.0mm thin lacquers to 2.8mm ultra-heavy gelcoat.
Gravity Cups & Accessories
Available Cups & Accessories
| Part # | Description | Notes |
|---|---|---|
| 51-401 | 700mL Aluminum Gravity Cup | Included with gun. |
| 51-403 | 1000mL Aluminum Gravity Cup | Optional — larger capacity, uses same 51-418 lid |
| 51-400 | 700mL Plastic Gravity Cup | Optional — lighter weight alternative |
| 51-418 | Gravity Cup Lid | For 51-401 and 51-403 aluminum cups |
| 52-300 | Mini Gun Regulator | Optional inline regulator |
| 51-432 | Magnetic Gravity Gun Stand | Optional — holds gun on metal surfaces between passes |
Jaguar 100C Product Manual
Full parts diagram, air cap chart, nozzle selection guide & replacement part numbers for all J100C configurations
Download the Jaguar 100C ManualNeed Help Selecting the Right Configuration?
Contact CET’s technical support team with your material type and viscosity. Call or text 586-210-0555.
