null

Jaguar 100C Gelcoat Spray Gun

(Showing 13 of 13)

 

 
 

C.A. Technologies · Authorized Distributor

Jaguar J100C
Gravity Feed Conventional

Lacquers · Enamels · Epoxies · High Solids · Gelcoat · US Made

Gravity Feed 13 Configurations US Made

Not sure which J100C setup is right for your coating?  CET's team confirms nozzle, air cap, and compressor requirements before you order.

586-210-0555 ✉ sales@cetinc.com
13
Configurations
2.8mm
Max Orifice
700mL
Cup Included
20 oz
Weight
50 PSI
Max Inlet

Overview

Gravity Feed.
Every Coating.
One Gun.

The C.A. Technologies Jaguar 100C (J100C) is a gravity feed conventional spray gun engineered for the full spectrum of coating applications — from thin lacquers and enamels through heavy body primers, high solid coatings, and polyester gelcoat.

With all stainless steel fluid passages, a forged aluminum body, and 13 CET Verified configurations spanning 1.0mm through 2.8mm, the Jaguar 100C handles virtually any coating a gravity gun can be asked to spray — including C.A. Technologies’ own recommended gelcoat setup at 2.8mm × 2268.

The 700mL gravity cup threads directly onto the gun — no pressure pot, no hose management, no external supply required. Portable enough for touch-up work, robust enough for production panel finishing. US made in Louisville, CO.

At a Glance

Key Specifications

Feed Type GRAVITY — cup threads directly on gun
Orifice Range 1.0mm – 2.8mm (stainless or carbide)
Air Consumption 12 CFM – 15 CFM (cap dependent)
Body Forged Aluminum — 20 oz.
Fluid Passages All Stainless Steel
Fluid Inlet 16mm × 1.5mm (m) gravity cup thread
Air Inlet 1/4” NPS (m)
Max Inlet Pressure 50 PSI
Cup Included 51-401 700mL Aluminum
Fan Control 60-1500 (included)
Repair Kit 10-105 (fits all J100C)
Origin US Made — Louisville, CO

Why the J100C

Conventional Dependability Across Every Viscosity

Gravity Feed Simplicity

The 700mL cup attaches directly via 16mm × 1.5mm threads. No external pressure supply required — portable, fast to set up, practical for both shop and field use.

All Stainless Fluid Passages

Full chemical resistance to lacquers, enamels, epoxies, urethanes, automotive coatings, and gelcoat resins. No corrosion or degradation over extended production use.

C.A. Tech Gelcoat Spec

The 2.8mm × 2268 setup (J100C-28-2268-401) is C.A. Technologies’ own recommended configuration for polyester gelcoat — the widest fan and largest orifice in the lineup.

Carbide at 2.8mm

The J100C-28V-2268-401 provides extended orifice life for abrasive or particle-laden materials that cause accelerated wear on standard stainless nozzles at 2.8mm.

13 Verified Configurations

From 1.0mm thin lacquers to 2.8mm ultra-heavy gelcoat, with multiple air cap options at key orifice sizes to fine-tune CFM and fan width to the application.

Production-Ready at 20 oz.

Lightweight enough for extended finishing sessions without operator fatigue. Forged aluminum body built to production standards for daily industrial use.

Material Selection

Viscosity & Orifice Guide

Match your coating to the correct orifice range, then use the configuration table below. Call or text 586-210-0555 to confirm compressor sizing before you order.

ViscosityZahn #2Typical MaterialsOrificeCompressor (Continuous)
Thin 16–20 sec. Lacquers, enamels, sealers, primers 1.0 – 1.3mm 3–5 HP single-stage
Medium 21–30 sec. Automotive base coat, enamels, epoxies, urethanes, clear coat 1.3 – 1.8mm 3–5 HP single-stage (12 CFM) or 5 HP two-stage (15 CFM)
Heavy >30 sec. Heavy body primers, high solid enamels, adhesives 1.8 – 2.2mm 5 HP two-stage or 7.5 HP single-stage
Ultra-Heavy Gelcoat range Polyester gelcoat, very high viscosity coatings 2.8mm 5 HP two-stage or 7.5 HP single-stage

For intermittent or touch-up work, a smaller compressor with recovery time between passes may be sufficient. Call or text 586-210-0555 to confirm your compressor is sized correctly before ordering.

All 13 Configurations

Complete Configuration Guide

All 13 configurations are CET Verified. Click any model number to view the full product page with specs, compressor requirements, and application guidance.

ModelNozzleAir CapCFMFanBest For
1.0mm
J100C-10-2266-401 1.0mm 21-2266 12 12" Thin — lacquers, enamels, sealers
1.2mm
J100C-12-2266-401 1.2mm 21-2266 12 12" Thin-medium — lacquers, enamels, primers
1.3mm
J100C-13-2266-401 1.3mm 21-2266 12 12" Medium — lacquers, primers, enamels
J100C-13-2466-401 1.3mm 21-2466 15 13" Medium — wider fan, higher CFM
1.5mm
J100C-15-2266-401 1.5mm 21-2266 12 12" Medium — automotive base coat, enamels, epoxies
J100C-15-2366-401 1.5mm 21-2366 12 10" Medium — narrow fan, detail & component work
J100C-15-2466-401 1.5mm 21-2466 15 13" Medium-heavy — production enamels, urethanes, primers
1.8mm
J100C-18-2266-401 1.8mm 21-2266 12 12" Medium-heavy — automotive clear coat, epoxies
J100C-18-2466-401 1.8mm 21-2466 15 13" Heavy — high solid coatings, gelcoat
J100C-18-1590-401 1.8mm 1590 Low — Low CFM — sensitive substrates, limited air supply — confirm with CET before ordering
2.2mm
J100C-22-2467-401 2.2mm 21-2467 15 14" Heavy — heavy body primers, high solid enamels, adhesives
2.8mm
J100C-28-2268-401 2.8mm stainless 21-2268 15 14" Ultra-heavy — polyester gelcoat — C.A. Tech recommended gelcoat config
J100C-28V-2268-401 2.8mm carbide 21-2268 15 14" Ultra-heavy — abrasive gelcoat, particle-laden materials

The V suffix on nozzle size (e.g. 28V) denotes tungsten carbide. All other configurations use 17-4PH stainless steel nozzles. The -401 suffix denotes the included 700mL aluminum cup.

How Part Numbers Work

Reading a J100C Model Number

Every model follows: J100C – NOZZLE SIZE – AIR CAP – 401

ExampleNozzleAir CapSuffix
J100C-15-2266-401 1.5mm SS 21-2266 401 = 700mL cup
J100C-18-2466-401 1.8mm SS 21-2466 401 = 700mL cup
J100C-28V-2268-401 2.8mm carbide 21-2268 401 = 700mL cup

V suffix = tungsten carbide nozzle  ·  No V = 17-4PH stainless nozzle  ·  -401 = 700mL aluminum cup included with all configurations. Unsure? Call 586-210-0555.

Gravity Cups & Accessories

Available Cups & Accessories

Part #DescriptionNotes
51-401 700mL Aluminum Cup Included with all configs
51-403 1000mL Aluminum Cup Extended capacity for production runs
51-400 700mL Plastic Cup Lighter weight alternative
51-418 Gravity Cup Lid For 51-401 and 51-403 aluminum cups
60-1500 Fan Control Assembly Included with all configurations
52-300 Mini Gun Regulator Optional inline regulator for precise inlet pressure control
51-432 Magnetic Gun Stand Optional — holds gun on metal surfaces between passes

Common Questions

Frequently Asked Questions

What is the Jaguar 100C best for?

A general-purpose gravity feed conventional gun covering thin lacquers and automotive enamels through ultra-heavy polyester gelcoat. Most notably, it’s C.A. Technologies’ own recommended gelcoat platform at 2.8mm × 2268. Also widely used in automotive refinishing, industrial coating, marine fabrication, and woodworking.

What is the difference between the air caps?

21-2266: 12 CFM, 12" fan — standard for 1.0–1.8mm gravity work. 21-2366: 12 CFM, 10" narrow fan for detail work. 21-2466: 15 CFM, 13" wider fan for production finishing. 21-2467: dedicated 2.2mm cap. 21-2268: dedicated 2.8mm gelcoat cap. Call 586-210-0555 to confirm.

What compressor do I need?

12 CFM caps (2266, 2366): 3–5 HP single-stage for continuous finishing. 15 CFM caps (2466, 2467, 2268): 5 HP two-stage or 7.5 HP single-stage for continuous finishing. For intermittent or touch-up work, a smaller compressor with recovery time may suffice. Call 586-210-0555 to confirm before ordering.

When should I choose the carbide 28V over standard stainless?

When abrasive fillers or particle-laden gelcoat are causing accelerated wear on your 2.8mm stainless nozzle. If your stainless nozzle holds up adequately, the standard J100C-28-2268-401 is the right choice. The carbide nozzle is also available separately (31-0628) as a drop-in upgrade.

What repair kit does the J100C use?

All J100C configurations use repair kit 10-105 — all seals, o-rings, needle seal, and springs for a complete rebuild. CET stocks repair kits for same-day shipment. Call or text 586-210-0555 to confirm availability.

Where is the parts manual?

Full parts manual with exploded diagram, parts list, and air cap chart available at the Jaguar J100C Spare Parts page or via the download button below. CET includes documentation with every order.

Why Buy From CET

The CET Difference

20+ Years of Experience

CET has been matching customers to the right C.A. Technologies configuration for over 20 years. We know these guns and the applications they go into inside and out.

Real Technical Support

Call or text 586-210-0555 to reach CET's technical team. We'll confirm nozzle, air cap, and compressor requirements before you order — right the first time.

Verified Parts In Stock

Gun, repair kit, air caps, cups, and spare parts all in stock. You're never waiting on back-ordered components. Documentation included with every order.

Jaguar 100C Product Manual

Full parts diagram, air cap chart, nozzle selection guide & replacement part numbers for all J100C configurations.

⬇ Download Manual

Contact CET with your material type, viscosity, and compressor capacity — we'll confirm the correct Jaguar 100C configuration before you order.  586-210-0555  ·  sales@cetinc.com

Show 12