Description
C.A. Technologies Jaguar 100C — J100C-15-2366-401 (1.5mm Nozzle, 2366 Air Cap)
The C.A. Technologies Jaguar 100C J100C-15-2366-401 is a 1.5mm gravity feed conventional spray gun paired with the 21-2366 air cap — the narrow-fan configuration at 1.5mm for operators who need precise pattern control on smaller components, detail work, or confined areas where a standard 12" or wider fan would overspray. At 12 SCFM and a 10" fan, this setup delivers the same air volume as the 2266 cap but concentrates it into a tighter pattern. Forged aluminum body, all stainless steel fluid passages, 700mL aluminum cup included. US made. Call or text 586-210-0555 to confirm this is the right setup for your application.
✓ 1.5mm stainless orifice • ✓ Narrow 10" fan — detail work and tight patterns • ✓ Gravity feed — 700mL aluminum cup included • ✓ 12 SCFM @ 50 PSI — 30-gallon compressor minimum • ✓ All stainless fluid passages • ✓ US Made — CET Verified
Model: J100C-15-2366-401 • Nozzle: 1.5mm (.059") • Air Cap: 21-2366 • Feed: GRAVITY • SCFM: 12 @ 50 PSI
Cup: 51-401 700mL Aluminum (included) • Fan Control: 60-1500 (included) • Repair Kit: 10-105 • Max Inlet Pressure: 50 PSI • CET Verified Configuration
Overview
At a Glance
Specifications
Tech Specs
| Model | J100C-15-2366-401 |
| Fluid Nozzle | 31-0615 — 1.5mm (.059") 17-4PH Stainless |
| Air Cap | 21-2366 — Gravity, 12 SCFM @ 50 PSI |
| Needle | 40-1115 — Shared with 1.8mm configurations — one spare needle covers both orifice sizes |
| Feed Type | GRAVITY — 700mL aluminum cup included, no pressure supply required |
| Gravity Cup Included | 51-401 700mL Aluminum — ships with gun |
| Max Inlet Pressure | 50 PSI |
| Air Consumption | 12 SCFM @ 50 PSI — requires minimum 30-gallon compressor at 90 PSI rated output |
| Max Pattern Width | 10" — narrowest fan in the 1.5mm J100C lineup, suited for detail work and component finishing |
| Air Inlet | 1/4" NPS (m) — standard shop air fitting |
| Fluid Inlet | 16mm x 1.5mm (m) — gravity cup threads directly onto gun |
| Body | Forged Aluminum — 20 oz., lightweight for all-day use |
| Fluid Passages | All Stainless Steel — chemical resistance to automotive coatings, enamels, and industrial topcoats |
| Fan Control | 60-1500 (included) — adjusts fan width during application |
| Repair Kit | 10-105 — all seals, o-rings, needle seal, springs for a complete rebuild |
| Fulfillment | Most in-stock orders ship same day. Call or text 586-210-0555 to confirm availability. |
| Origin | US Made — C.A. Technologies (Louisville, CO) |
Application
CET Application Match — Best for This Setup
The CET Preferred Setup for 1.5mm applications where tight pattern control is the priority over broad coverage. CET recommends the J100C-15-2366-401 for detail work, small component finishing, and confined areas where a wider fan would overspray adjacent surfaces.
Common Questions
Frequently Asked Questions
- Why would I choose a 10" fan over a 12" fan?
- A narrower fan concentrates the pattern for detail work, small components, or confined areas where a wider fan would overspray surrounding surfaces. The 2366 delivers the same 1.5mm fluid volume as the 2266 in a tighter 10" pattern.
- What compressor do I need?
- A 30-gallon compressor at 90 PSI — same as the 2266 cap.
- What needle does the 1.5mm nozzle use?
- The 40-1115 (115) needle, shared with 1.8mm configurations.
- What repair kit does the Jaguar 100C use?
- All J100C configurations use repair kit 10-105, which includes all wear seals, o-rings, needle seal cartridge, and springs. CET stocks for same-day shipment — call or text 586-210-0555.
- Where can I find the full Jaguar 100C parts manual?
- Available on the Jaguar J100C Spare Parts page or via the download button below.
All Configurations
Find the Right Jaguar 100C for Your Application
The Jaguar 100C is available in 13 configurations covering 1.0mm through 2.8mm, with both stainless and carbide nozzle options. All configurations are CET Verified. Contact CET for a CET Application Match recommendation.
| Model | Nozzle | Air Cap | SCFM | Fan | Best For | Order |
|---|---|---|---|---|---|---|
| J100C-10-2266-401 | 1.0mm | 21-2266 | 12 | 12" | Thin — lacquers, enamels, sealers | Order |
| J100C-12-2266-401 | 1.2mm | 21-2266 | 12 | 12" | Thin-medium — lacquers, enamels, primers | Order |
| J100C-13-2266-401 | 1.3mm | 21-2266 | 12 | 12" | Medium — lacquers, primers, enamels | Order |
| J100C-13-2466-401 | 1.3mm | 21-2466 | 15 | 13" | Medium — wider fan, higher SCFM | Order |
| J100C-15-2266-401 | 1.5mm | 21-2266 | 12 | 12" | Medium — base coat, enamels, epoxies | Order |
| J100C-15-2366-401 | 1.5mm | 21-2366 | 12 | 10" | Medium — narrow fan, detail work | Current |
| J100C-15-2466-401 | 1.5mm | 21-2466 | 15 | 13" | Medium-heavy — enamels, urethanes, primers | Order |
| J100C-18-2266-401 | 1.8mm | 21-2266 | 12 | 12" | Medium-heavy — clear coat, epoxies | Order |
| J100C-18-2466-401 | 1.8mm | 21-2466 | 15 | 13" | Heavy — high solid coatings, gelcoat | Order |
| J100C-18-1590-401 | 1.8mm | 1590 | Low | — | Low CFM — sensitive substrates | Order |
| J100C-22-2467-401 | 2.2mm | 21-2467 | 15 | 14" | Heavy — heavy body primers, high solid enamels | Order |
| J100C-28-2268-401 | 2.8mm | 21-2268 | 15 | 14" | Ultra-heavy — gelcoat, C.A. Tech recommended | Order |
| J100C-28V-2268-401 | 2.8mm carbide | 21-2268 | 15 | 14" | Ultra-heavy — abrasive gelcoat, abrasive materials | Order |
Why Buy From CET
The CET Difference
- Over 20 years supplying industrial finishing equipment — CET has been matching customers to the right C.A. Technologies configuration since the beginning.
- Real technical support before and after the sale — call or text 586-210-0555 to reach CET’s technical team directly.
- Fast fulfillment on most in-stock orders — most orders ship same day from C.A. Technologies’ Colorado facility.
- Verified part compatibility — every configuration on this page is CET Verified. We stock the gun, the repair kit, the air caps, and the spare parts.
- Documentation included — every order ships with access to the full parts manual, air cap chart, and nozzle selection guide.
- The best order fulfillment in the industry — you receive updates at every step so you always know where your order is.
Why Choose the Jaguar 100C
Conventional Dependability Across Every Viscosity
The Jaguar 100C is C.A. Technologies’ workhorse conventional gravity feed gun — forged aluminum body, all stainless steel fluid passages, nine air cap options, and nozzles from 1.0mm to 2.8mm covering the full spectrum from thin lacquers to ultra-heavy gelcoat in a single platform.
- All stainless steel fluid passages: Full chemical resistance to lacquers, enamels, automotive coatings, and industrial topcoats.
- Gravity feed simplicity: Cup threads directly onto the gun. No pressure pot, no hose management.
- Carbide nozzle options: Available at 2.8mm for abrasive or particle-laden materials.
- Forged aluminum body at 20 oz.: Lightweight for extended finishing sessions.
- 13 active configurations: From 1.0mm thin lacquers to 2.8mm ultra-heavy gelcoat.
Gravity Cups & Accessories
Available Cups & Accessories
| Part # | Description | Notes |
|---|---|---|
| 51-401 | 700mL Aluminum Gravity Cup | Included with gun. |
| 51-403 | 1000mL Aluminum Gravity Cup | Optional — larger capacity, uses same 51-418 lid |
| 51-400 | 700mL Plastic Gravity Cup | Optional — lighter weight alternative |
| 51-418 | Gravity Cup Lid | For 51-401 and 51-403 aluminum cups |
| 52-300 | Mini Gun Regulator | Optional inline regulator |
| 51-432 | Magnetic Gravity Gun Stand | Optional — holds gun on metal surfaces between passes |
Jaguar 100C Product Manual
Full parts diagram, air cap chart, nozzle selection guide & replacement part numbers for all J100C configurations
Download the Jaguar 100C ManualNeed Help Confirming the Right Fan Width?
Call or text 586-210-0555. CET’s technical team will confirm whether the 10" narrow fan or a standard-width cap is the right choice for your application.
