There are no products listed under this category.
Item No. | Part No. | Description |
1 | See Air Cap Chart | Air Cap |
3 | See Air Cap Chart | Fluid Tip |
4 | 33-1201 | Fluid Nozzle Body |
5 | 98-8026 | O-Ring (Teflon) |
6 |
60-A31H-R |
Nozzle Body Carrier (Standard) Nozzle Body Carrier (Recirculating) |
7 | 60-34H | Air Cap Adapter |
8 | 60-131 | O-Ring (Teflon) |
9 | 60-614 | Mounting Rod |
10 | 98-0115 | Locknut (3/8-16) |
11 | 60-621 | AutoCAT Gun Body HVLP |
12 | 60-136 | Plug |
13 | 98-8108 | O-Ring (Teflon) |
14 | 98-0108 | Circlip |
15 | 60-605 | Fan Control Housing |
16 | 60-606 | Fan Control Stem |
17 | See Air Cap Chart | Fan Control Orifice |
18 | 60-1400 | Needle Seal Assembly* |
19 | 60-604 | Seal Cap |
20 | 98-8006 | O-Ring (Teflon) |
21 | 98-7006 | O-Ring (Viton) 2 Required |
22 | 60-603 | Air Control Spool |
23 | 98-7014 | O-Ring (Viton) 2 Required |
24 | 98-7027 | O-Ring (Viton) 2 Required |
25 | 60-124 | Seal |
26 | 60-128 | Locknut |
27 | 60-126 | Fluid Inlet |
28 | 98-8010 | O-Ring (Teflon) |
29 | 60-602 | Piston |
30 | 98-7217 | O-Ring (Viton) |
31 | 66-246 | Piston Return Spring |
32 | 60-601 | End Cap |
33 | See Air Cap Chart | Needle Assembly |
34 | 60-613 | Needle Return Spring |
35 | 60-612 | Locknut - Fluid Control Knob |
36 | 60-608 | Fluid Control Knob |
37 | 53-551 (Not Shown) | Cylinder Air Fitting 1/8 NPT x 1/4 NPS |
38 | 53-552 (Not Shown) | Atomz. Air Fitting 1/4 NPT x 1/4 NPT |
Air Cap, Nozzle and Needle
Material Type | Fluid Orifice x Air Cap | Maximum Pattern Width | Pressure / Siphon |
Very Thin less than 16 sec. Zahn #2 inks , dyes, solvents, stains |
1.0mm x 1010 |
12 |
P |
Thin 16 to 20 sec. Zahn #2 lacquers, enamels, primers, sealers |
1.0mm x 1010 1.3mm x 1013 |
12 12 |
P P |
Medium 21 to 30 sec. Zahn #2 automotive base coat enamels, primers, epoxies, urethanes, automotive clear coat |
1.3mm x 1013 1.5mm x 1015 1.7mm x 1017 |
12 12 12 12 |
P P P |
Heavy over 30 sec. Zahn #2 heavy body primers, high solid enamels, high solid automotive coatings, adhesives |
1.5mm x 1015 1.7mm x 1017 1.9mm x 1019 2.2mm x 1022 |
12 12 12 12 |
P P P P |
Air Caps | Pressure / Siphon | Max gun Inlet Pressure for HVLP (45 if Using Optional Regulator) | Fan Control Orifice | SCFM @ Max Gun Inlet | Air Cap Ring |
23- 1008 | Pressure | 40 | 60-617 | 13.5 | Included |
23- 1010 | Pressure | 40 | 60-617 | 13.5 | Included |
23- 1012 | Pressure | 40 | 60-617 | 13.5 | Included |
23- 1013 | Pressure | 40 | 60-617 | 13.5 | Included |
20- 1014 | Pressure | 40 | 60-617 | 13.5 | Included |
23- 1015 | Pressure | 40 | 60-617 | 13.5 | Included |
23- 1017 | Pressure | 40 | 60-617 | 13.5 | Included |
23- 1019 | Pressure | 40 | 60-617 | 13.5 | Included |
23- 1022 | Pressure | 40 | 60-617 | 13.5 | Included |
Available Fluid Nozzle Tips | Needles / Marking on Needle |
33-0208 0.8mm (.022") | 40-A308 (308) |
33-0210 1.0mm (.040") | 40-A310 (310) |
33-0212 1.2mm (.046") | 40-A312 (312) |
33-0213 1.3mm (.052") | 40-A313 (313) |
33-0214 1.4mm (.055") | 40-A314 (314) |
33-0215 1.5mm (.059") | 40-A315 (315) |
33-0217 1.7mm (.070") | 40-A317 (317) |
33-0219 1.9mm (.075") | 40-A319 (319) |
33-0222 2.2mm (.086") | 40-A322 (322) |
There are no products listed under this category.