- Information
- Versions/Accessories
- Specifications
- Spare Parts
- Literature
- Videos
Extensive Coating Options
• For the coating of workpieces made of wood, metal, leather or plastic, where a high-quality appearance is essential
• Water and solvent-based materials (wetted parts made of stainless steel)
• Large selection of nozzle and needle sizes for:
- Low to high viscosity materials
- Coatings with high solids content
• UV and highly abrasive materials (GA 1020 version with membrane seal)
Savings in Material Consumption
• Transfer efficiency of up to 88%
• Particularly low paint mist thanks to optimized air channel
TOPFINISH GA 1030
The TOPFINISH GA 1030 automatic spray gun convinces with excellent atomizing properties and a high-quality spray pattern. The universal unit is particularly low-wear and enables process-safe coating in continuous operation. For applications with UV and highly abrasive materials, the gun is available as TOPFINISH GA 1020 with membrane seal.
High Reliability
Twin Control is perfect for critical applications such as abrasive materials, reactive paints, high viscosity materials and high delivery rates.
The special software prevents off-ratio spraying and controls all working parameters to ensure a consistent and precise mixing quality.
High product availability
• Long maintenance intervals thanks to long-lasting components
• Fast exchange of wear & spare parts
Superior Coating Quality
• Precisely manufactured air caps optimized for every nozzle and needle size
• Optimized air duct design
• Precise adjustment of the material flow via needle adjustment knob
• Air supply is interrupted automatically during the coating process as soon as the needle closes
Lowest Spare Part Consumption
• Needle with wear-resistant and low friction coating
• Optimized, extra durable needle packing
• Two-piece nozzle: Only the nozzle head is exchanged
Accessories
| Part No. | Description |
| GA 1020/1030 adapter plate (aluminium, galvanized) With connections for, with or without internal control With or without circulation | |
| GA 1020/1030 stainless steel adapter plate With air connections, without bracket for, with or without internal control With or without circulation | |
| GA 1020/1030 adapter plate with flushing valve 0° base plate with fittings, can be used with or without circulation | |
| Gun adapter GA 1020/1030 for TF Robot Bell 1 With optical fiber cable adaption | |
| GA 1020/1030 60° adapter for robot applications With integrated flushing valve, for Fanuc P 250i | |
| GA 1020/1030 adapter plate for AGMD 517/PaintPro Intermediate plate for exchange with same TCP | |
| Holder for gun or base plate including mounting screws | |
| 90° product connection | |
| Nut | |
| Straight product connection for stainless steel adapter plate | |
| G1/4" sealing plug |
GA 1030
| Technical Data | |
Application Area | Airspray, Airspray - Conventional, Airspray - HVLP, Airspray - HVLP-Plus |
Application technique | Metal coating, Plastic coating, Wood coating, Wheel coating |
Processable materials | Water-borne, Solvent-borne, Abrasive, shear sensitive, sensitive to moisture |
Material wetted parts | Stainless steel 1.4301 |
Certification | Complies with ATEX directive, Complies with CE directive |
Dimentions | 139 x 42 x 42 mm |
Weight | 650 g |
Max. material pressure | 8 bar |
Max. sound level | 92.8 dB(A) |
Material temperature | 5-80 °C |
Nozzle size | 0.3-3.5 mm |
GA 1030
Gun Bodies
All Parts
| Item No. | Part No. | Description |
| 1 | Needle stroke adjustment set | |
| 2 | Air regulator set | |
| 3 | Constant needle stroke set | |
| 5 | Needle packing set | |
| 6 | Air cap nut, cpl. | |
| 7 | Nozzle nut | |
| 8 | Air control ring | |
| 9 | Hexagon socket head cap screw | |
| 10 | G1/4 product connections plugs | |
| 14 | Fitting set, assembly without adapter | |
| 15 | Needle guide, diaphragm | |
| 16 | Fitting PF-M-R1/8-530 bar-SSt | |
| 17 | G1/4 fitting, open | |
| 18 | Push-in fitting, QS-1/8-6-I | |
| 19 | Push-in fitting_QS-1/8-8-I | |
| 20 | Fixing bolt | |
| 21 | Threaded pin with hex. socket/point | |
| 22 | G1/4" sealing plugs | |
| 23 | Fitting, DF-MM-G1/4-G1/4-SSt | |
| 30 | - | O-ring |
| 31 | - | Sealing plug |
| 32 | - | Piston |
| 33 | - | Piston spring |
| 34 | - | Needle spring |
Tool and Service Sets
| Item No. | Part No. | Description |
| 13 | GA 1030 service set (air manifold ring, O-ring, needle packing set) | |
| 11 | Adapter fittings set | |
| 12 | Service set - pistons | |
| 12a | Service set - pistons without valves | |
| - | Adapter plate seal set (O-rings) | |
| - | Fitting set, assembly without adapter |
Adapter Plates
Connections at Side
| Item No. | Part No. | Description |
| 1 | Adapter plate "Product connections at side" | |
| 2 | Threaded pin with hex. socket/point | |
| 3 | - | O-ring |
| 5 | - | O-ring |
| 7 | Push-in fitting, QS-1/8-6-I | |
| 8 | Push-in fitting, QS-1/8-8-I |
Connections at Rear
| Item No. | Part. No | Description |
| 1 | Adapter plate "Product connections at rear" | |
| 2 | Threaded pin with hex. socket/point | |
| 3 | - | O-ring |
| 5 | - | O-ring |
| 7 | Push-in fitting, QS-1/8-6-I | |
| 8 | Push-in fitting, QS-1/8-8-I | |
| 9 | Fitting, DF-MM-G1/4-G1/4-SSt | |
| 10 | Sealing plug |
With Flushing Valve
| Item No. | Part No. | Description |
| 1 | Adapter plate "Flushing valve" | |
| 3 | - | O-ring |
| 5 | - | O-ring |
| 6 | Threaded pin with hex. socket/point | |
| 7 | Push-in fitting, QS-1/8-6-I | |
| 8 | Fitting, DF-MM-G1/4-G1/4-SSt | |
| 9 | Push-in fitting, QS-1/8-8-I | |
| 10 | Needle valve | |
| 11 | Sealing plug |
Needles and Nozzles
| Size | Needle | Nozzle | Set |
| 0.3mm | See Set | See Set | |
| 0.5mm | See Set | See Set | |
| 0.8mm | Purchase Separately | ||
| 1.0mm | Purchase Separately | ||
| 1.2mm | Purchase Separately | ||
| 1.5mm | Purchase Separately | ||
| 1.8mm | Purchase Separately | ||
| 2.0mm | Purchase Separately | ||
| 2.2mm | Purchase Separately | ||
| 2.5mm | See Set | See Set | |
| 3.0mm | See Set | See Set | |
| 3.5mm | See Set | See Set |
Air Caps
| Part No. | Description | Materials |
| Air cap 0.3-1.8 mm CONV 8 | Top coat, clear lacquer, separating agent, anti-dust | |
| Air cap 2.0-2.5 mm CONV 8 | Top coat, clear lacquer, separating agent, anti-dust | |
| Air cap 3.0 mm CONV 8 | Top coat, clear lacquer, separating agent, anti-dust | |
| 2401167 | Air cap 3.5 mm CONV 8 | Top coat, clear lacquer, separating agent, anti-dust |
| Air cap 0.3-1.8 mm CONV 10 | Stain, primer, filler, top coat, clear lacquer, spraying plaster, separating agent | |
| 2401169 | Air cap 2.0-2.5 mm CONV 10 | Stain, primer, filler, top coat, clear lacquer, spraying plaster, separating agent |
| 2401170 | Air cap 3.0 mm CONV 10 | Stain, primer, filler, top coat, clear lacquer, spraying plaster, separating agent |
| 2401171 | Air cap 3.5 mm CONV 10 | Stain, primer, filler, top coat, clear lacquer, spraying plaster, separating agent |
| Air cap 0.3-1.8 mm CONV 12 | Top coat, clear lacquer, separating agent | |
| 2401173 | Air cap 2.0-2.5 mm CONV 12 | Top coat, clear lacquer, separating agent |
| 2401174 | Air cap 0.3-1.8 mm CONV 14 | Top coat, clear lacquer, separating agent, anti-dust |
| 2401175 | Air cap 2.0-2.5 mm CONV 14 | Top coat, clear lacquer, separating agent, anti-dust |
| Air cap 0.3-1.8 mm HVLP Plus | - | |
| Air cap 2.0-2.2 mm HVLP Plus | - | |
| Air cap 0.3-1.8 mm HVLP | - | |
| Air cap 2.0-2.2 mm HVLP | - |
| English Manual | Spanish Manual | Data Sheet | Flyer |
| | | | |