Devilbiss AG 361
- Information
- Versions
- Spare Parts
- Specifications
- Literature
DEVILBISS AG-361 Spray Gun
Wide Variety of Air Caps
A comprehensive range of CONVentional, HVLP and Trans Tech (High Efficiency) Air Caps provide a choice of environmental compliance, transfer efficiency, atomization power and application requirements.
Mounting Options
• Rotary & Carousel Machines
• Reciprocators & Tranverse equipment
• Robot & complex gun movers
• Fixed spray stations
Professional spray equipment for
universal superior performance
AG-361 variants are designed to be cost effective guns with maximum control and serviceability. Available in two models – the AG-361 for general industrial finishing and the AG-361E for the ceramics industry.
Features
- Simple construction and easy maintenance for minimal down-time
- Stainless Steel Fluid Passageways for water based & solvent based coating
applications - Quick detachable mounting manifolds provide fast and easy maintenance
- Compact size and weight for easy positioning and precise alignment
- Multiple options and formats to evolve for all application requirements
- Independent Fan, Atomizing and Trigger Air – vital for robotic and fully
automatic machine applications
Applications
• Solvent and Water Based Paints
and Materials
• Wood sector Stains, Sealers and Topcoats
• Adhesives and Glues
• Ceramics, Enamel and Glaze
• Epoxy Primers and Polyurethane Top coats
• Air drying, stoving and 2K coatings
• UV and radiation cured finishes
AG-361E Ceramic & Enamel Industry Version
A specialized version of the AG-361 for the application of Ceramic Glaze and Waterbased Enamels. The AG-361E has an extended range of specialist air caps and fluid nozzles capable of handling the high fluid flows and abrasive nature of the coating and environment.
• Completely new dedicated air cap range for the superior application of coatings onto sanitaryware, tableware and all ceramicware
• Stainless Steel, Hardened Stainless, Nitride Hardenedand Tungsten Carbide version Fluid Nozzles & Needles for abrasive coatings
• Special O-ring needle packing designed for water-based abrasive particle coatings.
Versions
Other setups available, please email sales@cetinc.com for more information.
AG 361
| Description | Part No. (Click to Buy) |
| Devilbiss AG361 Auto Spray Gun | Conventional C1 | 1.0mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C1 | 1.4mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C1 | 1.8mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C2 | 0.85mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C2 | 1.0mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C2 | 1.4mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C2 | 1.8mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C3 | 0.85mm | |
| Devilbiss AG361 Auto Spray Gun |Conventional C3 | 1.0mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C3 | 1.4mm | |
| Devilbiss AG361 Auto Spray Gun | Conventional C3 | 1.8mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE10 | 0.85mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE10 | 1.0mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE10 | 1.4mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE10 | 1.8mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE20 | 0.85mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE20 | 1.0mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE20 | 1.4mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE20 | 1.8mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE40 | 0.85mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE40 | 1.0mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE40 | 1.4mm | |
| Devilbiss AG361 Auto Spray Gun | Transtech TE40 | 1.8mm | |
| Devilbiss AG361 Auto Spray Gun | HVLP HV30 | 0.85mm | |
| Devilbiss AG361 Auto Spray Gun | HVLP HV30 | 1.0mm | |
| Devilbiss AG361 Auto Spray Gun | HVLP HV30 | 1.4mm | |
| Devilbiss AG361 Auto Spray Gun | HVLP HV30 | 1.8mm | |
| Devilbiss AG361 Auto Spray Gun | HVLP HV40 | 0.85mm | |
| Devilbiss AG361 Auto Spray Gun | HVLP HV40 | 1.0mm | |
| Devilbiss AG361 Auto Spray Gun | HVLP HV40 | 1.4mm | |
| Devilbiss AG361 Auto Spray Gun | HVLP HV40 | 1.8mm |
AG 361E
| Description | Part No. (Click to Buy) |
| Devilbiss AG361E Auto Spray Gun | Conventional C62 | 2.8 mm | FR | |
| Devilbiss AG361E Auto Spray Gun | Conventional C67 | 1.8 mm | |
| Devilbiss AG361E Auto Spray Gun | Conventional C64 | 2.2 mm | |
| Devilbiss AG361E Auto Spray Gun | Conventional C62 | 2.8 mm | |
| Devilbiss AG361E Auto Spray Gun | Conventional C62 | 2.8 mm |
Spare Parts
| Item No. | Part No. | Description |
| 1 | See below | Air cap and retaining ring |
| 2 | Retaining ring sub assembly | |
| 3 | Spring clip (Kit of 5) | |
| 4 | See below | Fluid tip |
| 5a | Sprayhead and pin assy | |
| 5b | SN-69-US-K | AG 361E spray head |
| 6 | Gasket (kit of 2) | |
| 7 | Torx screw (kit of 4) | |
| 8 | Head | |
| 9 | Plug | |
| 10 | Plug | |
| 11a | Needle packing | |
| 11b | AG 361E ceramic packing assy | |
| 12 | Packing spacer | |
| 13 | O-ring (kit of 4) | |
| 14 | O-ring (kit of 2) | |
| 15 | AG 361 Body | |
| 16 | Hexagon socket set screw | |
| 17 | Control valve | |
| 18 | Piston and seal kit | |
| 19 | O-ring (kit of 2) | |
| 20 | O-ring (kit of 2) | |
| 21 | O-ring (kit of 4) | |
| 22 | Piston spring | |
| 23 | See below | Fluid needle |
| 24 | Rear housing assembly | |
| 25 | Ring and ball kit | |
| 26 | Needle spring kit | |
| 27 | Spring button (kit of 2) | |
| 28 | Needle spring | |
| 29 | Spring button (kit of 2) | |
| 30 | Adjusting knob | |
| 31 | Fixed rear housing | |
| 32 | Micrometer assembly | |
| 33 | Blanking plug | |
| 34 | Remote connector |
Standard Air Caps, Needles and Nozzles
Conventional Fluid Tips and Needles
| Fluid Tip Size | Stainless Steel | Nitride Hardened |
| - | Fluid Tip Needle | Fluid Tip Needle |
| 0.85 | ||
| 1.0 | ||
| 1.2 | ||
| 1.4 | ||
| 1.6 | ||
| 1.8 |
Trans-tech/HVLP Fluid Tips and Needles
| Fluid Tip Size | Stainless Steel | Nitride Hardened |
| - | Fluid Tip Needle | Fluid Tip Needle |
| 0.85 | ||
| 1.0 | ||
| 1.2 | ||
| 1.4 | ||
| 1.6 | ||
| 1.8 | ||
| 2.0 | ||
| 2.2 |
Air Caps
| Air Cap & Type | Part Number | Air Consumption | Recommended Air Inlet Pressure | Typical Fluid Flow* | Typical Fan Pattern Size** |
| C1 Conventional | 300 L/min [10.7 cfm] | 3 Bar [45 psi] | 150-250 ml/min | 270mm | |
| C2 Conventional | 290 L/min [10.3 cfm] | 3 Bar [45 psi] | 100-350 ml/min | 270mm | |
| C3 Conventional | 440 L/min [15.7 cfm] | 3 Bar [45 psi] | 250-600 ml/min | 360mm | |
| TE10 Trans-Tech/Compliant | 255 L/min [9.1 cfm] | 2 Bar [30 psi] | 150-200 ml/min | 300mm | |
| TE20 Trans-Tech/Compliant | 325 L/min [11.6 cfm] | 2 Bar [30 psi] | 150-200 ml/min | 290mm | |
| TE30 Trans-Tech/Compliant | 375 L/min [13.3 cfm] | 2 Bar [30 psi] | 200-300 ml/min | 300mm | |
| TE40 Trans-Tech/Compliant | 355 L/min [12.6 cfm] | 2 Bar [30 psi] | 250-400 ml/min | 380mm | |
| TE50 Trans-Tech/Compliant | 425 L/min [15.1 cfm] | 2 Bar [30 psi] | 250-400 ml/min | 300mm | |
| HV30*** HVLP | 450 L/min [16.0 cfm] | 1.75 Bar [26 psi] | 160-200 ml/min | 315mm |
*Flow rates may vary according to paint/material and pressure used
**Fan pattern size @ 200mm distance
***HV30 (HVLP) operates at 0.7 bar [10 psi] atomization air pressure at the cap
Ceramic Air Caps, Needles and Nozzles
| Fluid Tip Size | Stainless Steel | Nitride Hardened | Tungsten Carbide |
| - | Fluid Tip Needle | Fluid Tip Needle | Fluid Tip Needle |
| 1.4 | - - | ||
| 1.8 | |||
| 2.2 | |||
| 2.8 |
Air Caps
| Air Cap & Type | Part Number | Air Consumption | Recommended Air Inlet Pressure | Typical Fluid Flow* | Typical Fan Pattern Size** |
| C62 Conventional | 430 [15.2 cfm] | 3 Bar [45 psi] | < 3.5 L/min | 490mm | |
| C64 Conventional | 400 [14.1 cfm] | 3 Bar [45 psi] | < 2.5 L/min | 430mm | |
| C67 Conventional | 425 [15.0 cfm] | 3 Bar [45 psi] | < 2.0 L/min | 500mm |
* Flow rates may vary according to paint/material and pressure used
** Fan pattern size at 300mm distance
Accessories
| New Column | New Column |
| Micrometer needle adjustment assembly | |
| Fixed needle position end cap | |
| Ratchet needle adjustment assembly | |
| Remote atomisation & fan air control fittings. Replaces items (17) see exploded view | |
| Atomisation & fan blanking plugs, replaces items (17) see exploded view | |
| Control valve | |
| Mounting bar | |
| Mounting bar nut |
| Technical Data | |
| P1 = Max Air Input Pressure | 7 bar [102 psi] |
| P2 = Max Fluid Input Pressure | 7 bar [102 psi] |
| P3 = Cylinder Air Pressure | 4 - 7 bar [58 psi - 102 psi] |
| Sound Pressure Level: | Available on request |
| Sound Power Level: | Available on request |
| Max Ambient Operating Temperature | 40°C Nominal [104°F] |
| Gun Head and Fluid Passageways | Stainless Steel |
| Gun Body Material | Quickclean™ Coated Aluminium |
| Air Cap Material | Electroless Nickel Plated Brass |
| Fluid Tip and Needle Construction | Stainless Steel |
| Seals and O-Rings | HDPE, Viton Extreme |
| P1 = Air Inlet Size | 1/4" G |
| P2 = Fluid Inlet Size | 1/4" G |
| P3 = Cylinder Inlet | 1/8" G |
| Gun Weight | 670g |
| L x H x W mm | 146 x 66 (Including Valves) x 44 |
| Manual | Brochure |
| | |