There are no products listed under this category.
Item No. | Part No. | Description |
1 | See Air Cap Chart | Air Cap |
2 | See Air Cap Chart | Fluid Tip |
3 | 33-1202 | Fluid Nozzle Body |
4 | 98-8026 | O-Ring |
5 |
60-J31H |
Nozzle Body Carrier |
6 | 60-123 | Seal |
7 | 60-34H | Air Cap Adapter |
8 | 60-131 | O-Ring |
9 | 60-124 | Seal |
10 | 60-130 | Seal |
11 | 60-118 | Locknut |
12 | 60-127 | Fluid Inlet |
13 | 60-1119 | Jaguar Gun Body - SLP |
14 | 98-0109 | Allen Plug |
15 | See Air Cap Chart | Fan Control Assembly |
16 | See Air Cap Chart | Fluid Needle |
17 | 60-1400 | Needle Seal |
18 | 60-1033 | Trigger Pivot Set |
19 | 60-2101 | Trigger |
20 | 60-1520 | Air Valve Assembly |
21 | 60-302 | Air Valve Poppet |
22 | 60-125 | Seal |
23 | 61-1003 | Air Valve Spring |
24 | 60-119 | Seal |
25 | 60-201 | Rear Bushing |
26 | 60-204 | Needle Return Spring |
27 | 60-205 | Spring Seat |
28 | 60-202 | Fluid Control Knob |
29 | 60-1510 | Inlet Air Control (Optional) |
30 | 60-122 | Plug |
31 | 60-104 | Air Inlet Fitting |
32 |
51-401 Standard 700mL 51-400 Optional 700mL 51-403 Optional 1000mL |
Gravity Feed Cup (Aluminum) Gravity Feed Cup (Plastic) Gravity Feed Cup (Aluminum) |
33 |
51-413 |
Gravity Cup Lid (401 & 403) Gravity Cup Lid (400) |
Air Cap, Nozzle and Needle
Material Type | Fluid Orifice x Air Cap | Maximum Pattern Width | CFM |
Very Thin less than 16 sec. Zahn #2 inks , dyes, solvents, stains |
1.0mm x 1310 | 12 | 13.5 |
Thin 16 to 20 sec. Zahn #2 lacquers, enamels, primers, sealers |
1.0mm x 1310 1.3mm x 1313 |
12 12 |
13.5 13.5 |
Medium 21 to 30 sec. Zahn #2 automotive base coat enamels, primers epoxies, urethanes, automotive clear coat |
1.3mm x 1313 1.5mm x 1315 1.7mm x 1317 |
12 12 12 |
13.5 13.5 13.5 |
Heavy over 30 sec. Zahn #2 heavy body primers, high solid enamels, high solid automotive coatings, adhesives |
1.5mm x 1315 1.7mm x 1317 1.9mm x 1319 2.2mm x 1322 |
12 12 12 12 |
13.5 13.5 13.5 13.5 |
Air Caps | Max Gun Inlet Pressure for HVLP | Fan Control | SCFM @ Max Gun Inlet |
23-1308 | 29 | 60-1504 (S) | 13.5 |
23-1310 | 29 | 60-1504 (S) | 13.5 |
23-1312 | 29 | 60-1504 (S) | 13.5 |
23-1313 | 29 | 60-1504 (S) | 13.5 |
23-1314 | 29 | 60-1504 (S) | 13.5 |
23-1315 | 29 | 60-1504 (S) | 13.5 |
23-1317 | 29 | 60-1504 (S) | 13.5 |
23-1319 | 29 | 60-1504 (S) | 13.5 |
23-1322 | 29 | 60-1504 (S) | 13.5 |
Standard In CAT Pack | Available Fluid Nozzle Tips | Needles / Marking on Needle |
33-0208 0.8mm (.022") | 40-1308 (308) | |
W, W-PPS | 33-0210 1.0mm (.040") | 40-1310 (310) |
33-0212 1.2mm (.046") | 40-1312 (312) | |
W, A, PPS | 33-0213 1.3mm (.052") | 40-1313 (313) |
33-0214 1.4mm (.055") | 40-1314 (314) | |
W, A, PPS | 33-0215 1.5mm (.059") | 40-1315 (315) |
33-0217 1.7mm (.070") | 40-1317 (317) | |
W, A, PPS | 33-0219 1.9mm (.075") | 40-1319 (319) |
33-0222 2.2mm (.086") | 40-1322 (322) |
There are no products listed under this category.