There are no products listed under this category.
Item No. | Part No. | Description |
1 | 2349286 | PROTEC GM 1 35 MPa |
1 | 2349287 | PROTEC GM 1 53 MPa |
2 | 2346614 | Handle |
3 | 2353559 | Filter housing with guard bracket |
4 | 2353599 | Trigger 4 finger, 53 Mpa |
4 | 2353600 | Trigger 2 finger, 35 MPa |
5 | 347335 | Pressure spring |
6 | 2353606 | Preload nut, 530 bar |
6 | 2353607 | Preload nut, 350 bar |
7 | 2353556 | Valve rod unit |
8 | 2353546 | Intermediate piece "G" 7/8-14-UNF |
8 | 2353547 | Intermediate piece "F" 11/16-16-UN |
9 | 9910403 | Cap nut |
10 | 2343085 | Bolt |
11 | 2353611 | Filter socket with seal |
12 | 2353613 | Spray gun body |
13 | 43411 | Actuating pins |
14 | 364340 | Seal, filter |
15 | Filter insert, white (coarse), 50 mesh per inch * | |
15 | 2315723 | Filter insert, red (fine), 200 mesh per inch – 10 pieces |
15 | 2315724 | Filter insert, blue (middle), 150 mesh per inch – 10 pieces |
15 | 2315725 | Filter insert, yellow (middle), 100 mesh per inch – 10 pieces |
15 | 2315726 | Filter insert, white (coarse), 50 mesh per inch – 10 pieces |
15 | 2365429 | Filter insert, green (coarse), 30 mesh per inch – 10 pieces |
16a | Seal kit PT-HD GM1 metal included with PROTEC Tip 556xxx | |
16a | 2367857 | Seal kit PT-HD GM1 metal – 5 pieces |
16a | 2353548 | Seal kit PT-HD GM1 plastic – 5 pieces |
16b/c | 2371335 | Seal |
17a | 2353549 | Nozzle holder PT-HD GM1 for Profi Tip HD 1006xxx and PROTEC Tip 556xxx |
17b | 2371338 | Nozzle holder WAGNER Tip 7/8 UNF for WAGNER Tip 1088xxx |
17c | 2371336 | Anti-contact guard 7/8 UNF for Standard Tip 90xxx (not for Standard Tip plus) |
18 | 9992590 | Loctite® 222 |
19 | 9992804 | Loctite® 648 |
20 | 2353551 | Service set GM1 with intermediate piece "G" 7/8-14-UNF |
20 | 2356832 | Service set GM1 with intermediate piece "F" 11/16-16-UN |
There are no products listed under this category.