There are no products listed under this category.
Item No. | Part No. | Description |
1 | See Air Cap Chart | Air Cap Ring |
2 | See Air Cap Chart | Air Cap |
3 | See Air Cap Chart | Fluid Tip |
4 | 31-1201 | Fluid Nozzle Body |
6 |
60-L11H 60-A11H-R |
Nozzle Body Carrier (Standard) Nozzle Body Carrier (Recirculating) |
7 | 60-12H | Air Cap Adapter |
8 | 60-131 | O-Ring (Teflon) |
9 | 60-614 | Mounting Rod |
10 | 98-0115 | Locknut (3/8-16) |
11 | 60-621 | AutoCAT Gun Body HVLP |
12 | 60-136 | Plug |
13 | 98-8108 | O-Ring (Teflon) |
14 | 98-0108 | Circlip |
15 | 60-605 | Fan Control Housing |
16 | 60-606 | Fan Control Stem |
17 | See Air Cap Chart | Fan Control Orifice |
18 | 60-1400 | Needle Seal Assembly |
19 | 60-604 | Seal Cap |
20 | 98-8006 | O-Ring (Teflon) |
21 | 98-7006 | O-Ring (Viton) 2 Required |
22 | 60-603 | Air Control Spool |
23 | 98-7014 | O-Ring (Viton) 2 Required |
24 | 98-7027 | O-Ring (Viton) 2 Required |
25 | 60-124 | Seal |
26 | 60-128 | Locknut |
27 | 60-126 | Fluid Inlet |
28 | 98-8010 | O-Ring (Teflon) |
29 | 60-602 | Piston |
30 | 98-7217 | O-Ring (Viton) |
31 | 66-246 | Piston Return Spring |
32 | 60-601 | End Cap |
33 | See Air Cap Chart | Needle Assembly |
34 | 60-613 | Needle Return Spring |
35 | 60-612 | Locknut - Fluid Control Knob |
36 | 60-608 | Fluid Control Knob |
37 | 53-551 (Not Shown) | Cylinder Air Fitting 1/8 NPT x 1/4 NPS |
38 | 53-552 (Not Shown) | Atomz. Air Fitting 1/4 NPT x 1/4 NPT |
Air Cap, Nozzle and Needle
Material Type | Fluid Orifice x Air Cap | Maximum Pattern Width | Pressure / Siphon |
Very Thin less than 16 sec. Zahn #2 inks , dyes, solvents, stains |
0.5, 0.8mm x 1090 0.5, 0.8mm x 1092 |
10 11 |
P P |
Thin 16 to 20 sec. Zahn #2 lacquers, enamels, primers, sealers |
1.0, 1.2mm x 1092 1.0, 1.2mm x 1093 |
11 12 |
P P |
Medium 21 to 30 sec. Zahn #2 automotive base coat enamels, primers epoxies, urethanes, automotive clear coat |
1.3, 1.4, 1.5mm x 1093 1.3, 1.4, 1.5mm x 1095 1.3, 1.4, 1.5mm x 1097 |
12 12 13 |
P P P |
Heavy over 30 sec. Zahn #2 heavy body primers, high solid enamels, high solid automotive coatings, adhesives |
1.6, 1.7mm x 1095 1.6, 1.7mm x 1097 1.6, 1.7mm x 1195 1.6, 1.7mm x 1197 |
12 13 13 14 |
P P P P |
Air Caps | Pressure / Siphon | Max Gun Inlet Pressure for HVLP | Fan Control Orifice | SCFM @ Max Gun Inlet | Air Cap Ring |
21-1090 | Pressure | 15 | 60-616 | 6 | 21-1001 |
21-1091 | Pressure | 15 | 60-616 | 8 | 21-1001 |
21-1092 | Pressure | 15 | 60-616 | 8 | 21-1001 |
21-1093 | Pressure | 18 | 60-616 | 10 | 21-1001 |
21-1094 | Pressure | 33 | 60-616 | 13 | 21-1001 |
21-1095 | Pressure | 50 | 60-616 | 22.5 | 21-1001 |
21-1097 | Pressure | 50 | 60-616 | 22.5 | 21-1001 |
21-1195 | Pressure | 50 | 60-616 | 22.5 | Included |
21-1197 | Pressure | 50 | 60-616 | 22.5 | Included |
Available Fluid Nozzle Tips | Needles / Marking on Needle |
31-0205 0.5mm (.020") | 40-A100 (100) |
31-0208 0.8mm (.022") | 40-A100 (100) |
31-0210 1.0mm (.040") | 40-A100 (100) |
31-0212 1.2mm (.046") | 40-A100 (100) |
31-0213 1.3mm (.052") | 40-A100 (100) |
31-0214 1.4mm (.055") | 40-A100 (100) |
31-0215 1.5mm (.059") | 40-A100 (100) |
31-0216 1.6mm (.063") | 40-A100 (100) |
31-0217 1.7mm (.070") | 40-A100 (100) |
31-0412 1.2Fmm (.046") | 40-A112F (112F) |
31-0414 1.4Fmm (.055") | 40-A114F (114F) |
31-0417 1.7Fmm (.070") | 40-A117F (117F) |
There are no products listed under this category.