There are no products listed under this category.
Item No. | Part No. | Description |
1 | See Air Cap Chart | Air Cap Ring |
2 | See Air Cap Chart | Air Cap |
3 | See Air Cap Chart | Fluid Tip |
4 | 31-1201 | Fluid Nozzle Body |
5 | 60-J11H | Nozzle Body Carrier |
6 | 60-126 | Seal |
7 | 60-12H | Air Cap Adapter |
8 | 60-131 | O-Ring |
9 | 60-124 | Seal |
10 | 60-130 | Seal |
11 | 60-118 | Locknut |
12 | 60-127 | Fluid Inlet |
13 | 60-1113 | Jaguar Gun Body HVLP |
14 | 98-0109 | Allen Plug |
15 | See Air Cap Chart | Fan Control Assembly |
16 | See Air Cap Chart | Fluid Needle |
17 | 60-1400 | Needle Seal |
18 | 60-1033 | Trigger Pivot Set |
19 | 60-2101 | Trigger |
20 | 60-1520 | Air Valve Assembly |
21 | 60-302 | Air Valve Poppet |
22 | 60-125 | Seal |
23 | 61-1003 | Air Valve Spring |
24 | 60-119 | Seal |
25 | 60-201 | Rear Bushing |
26 | 60-204 | Needle Return Spring |
27 | 60-205 | Spring Seat |
28 | 60-202 | Fluid Control Knob |
29 | 60-1510 | Air Inlet Control (Optional) |
30 | 60-122 | Plug |
31 | 60-104 | Air Inlet Fitting |
32 |
51-401 Standard 700 mL 51-400 Optimal 700 mL 51 -403 Optional 1000 mL |
Gravity Feed Cup (Aluminum) Gravity Feed Cup (Plastic) Gravity Feed Cup (Aluminum) |
33 |
51-413 |
Gravity Cup Lit (401 & 403) Gravity Cup Lid (400) |
Air Cap, Nozzle and Needle
Material Type | Fluid Orifice x Air Cap | Maximum Pattern Width | CFM |
Very Thin less than 16 sec. Zahn #2 inks , dyes, solvents, stains |
0.5, 0.8mm x 1090 0.5, 0.8mm x 1092 |
10 11 |
6 8 |
Thin 16 to 20 sec. Zahn #2 lacquers, enamels, primers, sealers |
1.0, 1.2mm x 1092 1.0, 1.2mm x 1093 |
11 12 |
8 10 |
Medium 21 to 30 sec. Zahn #2 automotive base coat enamels, primers epoxies, urethanes, automotive clear coat |
1.3, 1.4, 1.5mm x 1093 1.3, 1.4, 1.5mm x 1095 1.3, 1.4, 1.5mm x 1097 |
12 12 13 |
10 22.5 22.5 |
Heavy over 30 sec. Zahn #2 heavy body primers, high solid enamels, high solid automotive coatings, adhesives |
1.6, 1.7mm x 1095 1.6, 1.7mm x 1097 |
12 13 |
22.5 22.5 |
Air Caps | Max Gun Inlet Pressure for HVLP | Fan Control | SCFM @ Max Gun Inlet | Air Cap Ring |
21-1090 | 15 | 60-1502 (#2) | 6 | 21-1001 |
21-1091 | 15 | 60-1502 (#2) | 8 | 21-1001 |
21-1092 | 15 | 60-1502 (#2) | 8 | 21-1001 |
21-1093 | 18 | 60-1502 (#2) | 10 | 21-1001 |
21-1094 | 33 | 60-1502 (#2) | 13 | 21-1001 |
21-1095 | 50 | 60-1502 (#2) | 22.5 | 21-1001 |
21-1097 | 50 | 60-1502 (#2) | 22.5 | 21-1001 |
Standard in CAT Pack | Available Fluid Nozzle Tips | Needles/ Marking on Needle |
31-0205 0.5mm (.020") | 40-1100 (100) | |
Included | 31-0208 0.8mm (.022") | 40-1100 (100) |
31-0210 1.0mm (.040") | 40-1100 (100) | |
31-0212 1.2mm (.046") | 40-1100 (100) | |
Included | 31-0213 1.3mm (.052") | 40-1100 (100) |
31-0214 1.4mm (.055") | 40-1100 (100) | |
31-0215 1.5mm (.059") | 40-1100 (100) | |
31-0216 1.6mm (.063") | 40-1100 (100) | |
Included | 31-0217 1.7mm (.070") | 40-1100 (100) |
31-0412 1.2Fmm (.046") | 40-1112F (112F) | |
31-0414 1.4Fmm (.055") | 40-1114F (114F) | |
31-0417 1.7Fmm (.070") | 40-1117F (117F) |
There are no products listed under this category.