Replacement options: https://store.cetinc.com/binks_trophy_manual_spraygun

 

The MACH 1 is a full size HVLP spray gun with special nozzles and modifications that allow it to operate high transfer efficiencies in compliance with the California South Coast Air Quality Management (SCAQMD) regulations as a high volume low pressure(HVLP) air spray gun. Constructed of a lightweight drop-forged aluminum body and stainless steel fluid passages, including long life self-adjusting packings, this spray gun is designed to stand up under hard, continuous use. It operates like a conventional spray system utilizing compressed shop air.

Binks MACH 1 HVLP

• Body: . . . . . . . . . . . . . . . . . . . Drop-forged aluminum
• Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.1 Oz.
• Air Inlet:. . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPS (m)
• Fluid Inlet: . . . . . . . . . . . . . . . . . . . . . . . . 3/8" NPS (m)
• Fluid Passages: . . . . . . . . . . . . . . . . . Stainless Steel
• Feed Type: . . . . . . . . . . . . . . Pressure / Siphon Feed
• Part Sheet:. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77-2463
• Gun Repair Kit: . . . . . . . . . . . . . . . . . . . . . . . . 54-3605

Other Repair Kits: 

54-4261 (Binks MACH 1 NDL Packing Kit L/N)

54-4262 (Packing Kit W/NDL MACH 1)

Fluid Nozzle Parts

Fluid	Fluid Nozzle No.	Applicable Air Nozzle	Fluid Needle
ULTRA LIGHT / Reduced Flow	89 (.020” Dia.) 0.5 mm		SEE NOTE
VERY LIGHT / Reduced Flow	R90 (.027” Dia.) 0.7 mm 90 (.030” Dia.) 0.8 mm	90P*** 90P***
LIGHT: less than15 to 20 seconds in a Zahn 2 Cup, e.g., stains, varnishes,thin lacquers, automotive refinishing fluids. 9	91 (.040” Dia.) 1.0 mm 92 (.046” Dia.) 1.2 mm	95P, 97P 95P, 97P	54-3941/
MEDIUM: 20 to 60 seconds in a ZAHN 2 Cup, e.g., general industrial coatings.	93 (.051” Dia.) 1.3 mm 94 (.055” Dia.) 1.4 mm 95 (.059” Dia.) 1.5 mm 96 (.063” Dia.) 1.6 mm	95AP, 97AP** 93P*, 94P 100P	54-3940
HEAVY: greater than 60 seconds in a Zahn 2 Cup	97 (.070” Dia.) 1.7 mm