Description
The Slim Line HVLP
The MACH 1SL HVLP is a lightweight, top quality, high performance spray gun. The superbly balanced forged aluminum body is ergonomically designed with a compact grip size, offering the operator extra comfort and control.
The MACH 1SL is a smaller, lighter weight version of the MACH 1 HVLP spray gun. The superbly balanced forged aluminum body is ergonomically designed with a compact grip size, offering the operator extra comfort and control. The MACH 1 SL HVLP is simple to operate, and provides exceptional finish quality with all of today's complex coatings, including high solids, waterborne, industrial automotive, and aerospace coatings. All fluid contact surfaces within the spray gun, including inlet, nozzle and needle, are corrosion resistant for use with waterborne coatings.
In addition, specially designed air and fluid nozzles enable the MACH 1SL HVLP to operate at high transfer efficiency in compliance with air quality regulations as an HVLP spray gun.
All of the spray gun’s components are machined and finished to exacting tolerances using only the highest quality materials, including long life self-adjusting packings to ensure years of peak efficiency.
- Body: . . . . . . . . . . . . . . . . . . . Drop-forged aluminum
- Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 Oz.
- Air Inlet:. . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPS (m)
- Fluid Inlet: . . . . . . . . . . . . . . . . . . . . . . . . 3/8" NPS (m)
- Fluid Passages: . . . . . . . . . . . . . . . . . Stainless Steel
- Feed Type: . . . . . . . . . . . . . . Pressure / Siphon Feed
- Part Sheet:. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77-2665
- Gun Repair Kit: . . . . . . . . . . . . . . . . . . . . . . . . 54-4278
MACH 1SL 1 Quart PTFE Coated Siphon Feed Cup
- Part Number: 98-1176
- Gun: 7000-4202-5 Mach 1SL
- Fluid Tip: 97S
- Air Cap: 95AS
- CFM Required: 22.5 @ 50 PSI
- Cup: 81-810 PTFE Coated Siphon Cup
| FLUID | FLUID NOZZLE NO. | APPLICABLE AIR NOZZLE | FLUID NEEDLE |
|---|---|---|---|
| ULTRA LIGHT / Reduced Flow | 89 (.020” Dia.) 0.5 mm | 90P***, 95P, 97P, 92P* 95AP, 97AP** 93P, 94P, 100P | 54-4382 |
| VERY LIGHT / Reduced Flow | 90 (.030” Dia.) 0.8 mm | ||
| LIGHT: less than 15 to 20 seconds in a Zahn 2 Cup, e.g., stains, varnishes, thin lacquers, automotive refinishing fluids. | 91 (.040” Dia.) 1.0 mm 92 (.046” Dia.) 1.2 mm 93 (.051” Dia.) 1.3 mm | ||
| MEDIUM: 20 to 60 seconds in a ZAHN 2 Cup, e.g., general industrial coatings. | 94 (.055” Dia.) 1.4 mm 95 (.059” Dia.) 1.5 mm 96 (.063” Dia.) 1.6 mm | ||
| HEAVY: greater than 60 seconds in a Zahn 2 Cup. | 97 (.070” Dia.) 1.7 mm |