null

Binks Trophy Pressure/Siphon Spare Parts & Manual

(Showing 48 of 63)

DOWNLOAD BINKS TROPHY GUN MANUAL HERE

wergoihwe.jpg

 Item No.  Part No.  Description
 1  54-6120  Air Cap Retaining Ring Assembly
 5  See Chart  Air Cap 
 6  JGA-156-K10  Spring-Clip (Kit of 10) 
 7  See Chart  Fluid Nozzle 
 8  54-6102-K3  Baffle/Separator (Kit of 3) 
 9  54-6122  Side Port Valve Assembly 
 10  --  Retaining Clip
 11  --    Body Bushing
 12  --   O-Ring 
 13   --   Side Port Stem 
 14   --   Pin 
 15   54-6131-K  Air Valve Service Kit 
 16   --   Front Seal - Air Valve 
 17   --   Front Air Valve Seal 
 18   54-6109  Air Valve Spindle
 19   --   Air Valve Spring 
 20   --   Real Seal - Air Valve 
 21   SN-66   Housing 
 22   47-6825  Needle - Stainless Steel (STD.) Marking: I 
 22   See Chart  Needle - Feathering 
 22   47-6830  Needle - Tungsten Carbide Marking: II 
 22   47-6826  Needle - Plastic Tip Marking: III 
 23   --  Spring/Pad Assembly 
 23   54-6133-K3  Spring/Pad (Standard) (Kit of 3)
 23   54-6134-K  Spring/Pad Assembly Kit - Heavy Duty (Optional) 
 24   54-6111  Knob - Needle Adjusting 
 25   54-6130-K  Needle Packing Kit (Standard)
 25   54-6129-K  Needle Packing Kit (Vitreous)
 26  --  Nut - Packing 
 27  --   Spring for Packing 
 28  --   Needle Packing (Standard) 
 28  --   Needle Packing (Vitreous Kit of 3) 
 29  54-4360  Trigger
 30  54-6132-K  Trigger Screw Nut Kit
 31  --  Trigger Screw  
 32  --   Trigger Nut 
 33  54-3513  Spindle Cap 
 34  SN-11  Plug 
 35  54-6112  Fitting - Air Inlet 
 36  --  Gun Body with Fluid Inlet 
 37  SPN-7   Tool - Seal Insertion 
 38   --   Gunner's Mate (3 CC Bag) 

Repair Kits

 Kit No.  Parts Included
 54-6122  10, 11, 12, 13, 14
 54-6129-K   26, 27, 28 
 54-6130-K  26, 27 
 SN-2-K3 (Also Available in Kit of 3)   28 
 54-6131-K  16, 17, 19, 20  
 54-6132-K   31, 32 
 GTI-428-K5  10, 12, 14
 54-6119-K3 (Also Available in Kit of 3)   28 
 54-6135  15, 18, 23, 28

Stainless Steel Feathering Needles and Nozzles - Optional

Feathering Needle Part No.  Marking on the Needle  Matching Nozzle P/N (Orifice Size)
 47-6833  I IIII  45-11050-12 1.2MM (.047")
 47-6834  II IIII  45-11050-14 1.4MM (.055")
 47-6835  II IIII  45-11050-18 1.8MM (.071")

Tungsten Carbide Nozzles and Needles

 Nozzle Size  TC Nozzle P.N.  TC Needle P.N.
 1.4 MM (.055")  45-11080-14  47-6830
 1.8 MM (.071")  45-11080-18  47-6830
 2.2 MM (.086")  45-11080-22  47-6830
 2.6 MM (.102")  45-11080-26  47-6830

Stainless Steel (Hardened) Fluid Nozzles - STD

 Stainless Fluid Nozzle  Orifice Size  Fluid Nozzle Part No. 
 .020"  .50mm  45-11050-50
 .035"  .85mm  45-11050-85
 .039"  1.0mm  45-11050-10
 .047"  1.2mm  45-11050-12
 .055"  1.4mm  45-11050-14
 .063"   1.6mm  45-11050-16
 .071"  1.8mm  45-11050-18
 .079"  2.0mm  45-11060-20
 .087"  2.2mm  45-11060-22
 .102"  2.6mm  45-11060-26

Test Air Cap Kits - Optional

 Conventional  
 54-6140-K  11-C KIT
 54-6141-K  12-C KIT
 54-6142-K  14-C KIT
 LVMP   
 54-6146-K  22-L KIT
 54-6147-K  23-L KIT
 54-6149-K  25-L KIT
 HVLP   
 54-6151-K  31-H KIT – HVLP
 54-6152-K  32-H KIT – HVLP
 54-6153-K  33-H KIT – HVLP
 54-6154-K  39-H KIT – HVLP

 

Conventional Air Cap and Fluid Nozzle Selection Chart

 Air Cap  Air Cap Part No.  Spray Pattern Range  CFM @ 30 PSI  CFM @ 50 PSI  CFM @ 70 PSI  Fluid Nozzle  Siphon or Pressure   Typical Coatings
 11-C  46-6500   8 - 12"  9.8  14.2  18.7  45-11050 series,

1.0 mm – 1.8 mm

  P   Stains, Primers, Lacquers, Enamels,

Acrylics, Reduced Latex, Mold Release
 12-C  46-6501   4 - 12"  8.3  12.1  14.2  45-11050 series,

1.0 mm – 1.8 mm

  P, S  Lacquers, Enamels, Top Coats,

Low Viscosity Adhesives
 14-C  46-6503  8 - 14"  17.0  24.4  31.2  45-11060 series,

2.0 mm – 2.6 mm or
45-11080 Tungsten Carbide
Series (VT), 1.4 mm – 2.6 mm

  P   Zinc Rich, Adhesives, Glazes, Engobies,

Ceramics, Porcelain Enamels

 

LVMP - Low Volume Medium Pressure Air Cap and Fluid Nozzle Selection Chart

 Air Cap  Air Cap Part No.  Spray Pattern Range  CFM @30 PSI Gun Inlet

(Dynamic)

  Fluid Nozzle  Siphon or

Pressure

 Typical Coatings 
 22-L  46-6510  4 - 12"  11.2   45-11050 series,

.5 mm – 1.6 mm

  P, S  Stains, Primers, Lacquers, Enamels,

Acrylics, Reduced Latex
 23-L  46-6511  4 - 12"  10.6  45-11050 series,

1.0 mm – 1.8 mm

  P, S  Lacquers, Enamels, Top Coats,

Low Viscosity Adhesives
 24-L  46-6512  2 - 6"  14.3  45-11050 series,

.5 mm – 1.8 mm

  P, S  Small Pattern Applications of Stains,

Lacquers, Enamels, Acrylics
 25-L  46-6513  4 - 15"  14.7  45-11050 series,

.85 mm – 1.8 mm

  P  Dyes, Stains, Toners, Enamels, Lacquers,

Primers, Urethanes, Solvent Coatings,
Waterborne Coatings

 

HVLP High Volume Low Pressure Air Cap and Fluid Nozzle Selection Chart

 Air Cap  Air Cap Part No.  Spray Pattern Range

 SCFM @ 10 PSI Cap 

Pressure (Dynamic)

 Gun Inlet 

PSI @ 10 PSI 

at Air Cap

(Dynamic)

  Fluid Nozzle   Siphon or Pressure   Typical Coating 
 31-H  46-6517  8 - 12"  10.5   17  45-11050 series,

.85 mm – 1.8 mm

  P, S  Stains, Low Viscous Enamels
 32-H  46-6518  8 - 18"  15.5  24  45-11050 series,

.85 mm – 1.8 mm

  P, S  Lacquers, Enamels, Multi-Colors,

 Multi-Spec, Nonstick Coatings, Cut-Latex
 33-H  46-6519  8 - 12"  11.0  16  45-11050 series,

.85 mm – 1.6 mm

  P  Stains, Lacquers, Enamel, Multi-Color,

Multi-Spec, Nonstick Coatings
 39-H  46-6525  4 - 12"  10.0  14  45-11050 series,

.85 mm – 1.6 mm

  P  Dyes, Stains, Toners, Enamels, Lacquers,

Primers, Urethanes, Solvent Coatings,
Waterborne Coatings

 

Round Spray Air Cap and Fluid Nozzle Selection Chart

 Air Cap  Air Cap Part No.  Spray Pattern Range  CFM @ 30 PSI  CFM @ 50 PSI  CFM @ 70 PSI  Fluid Nozzle  Siphon or Pressure  Typical Coatings
 16  46-6505  2 - 4"  5.6  7.8  10.5  45-11050 series, 1.0 mm - 1.8 mm  P, S  Lacquers, Enamels
Show 12 24 36 48