Rotary Piston Air Drive Agitators
Reduce Air Consumption and Operating Costs
- Information
- Catagories
- Literature
A New Generation, Reduce Air Consumption by up to 90%
Carlisle Fluid Technologies rotary piston air driven agitators are the cost-saving alternative agitators that typically provide a return on investment in under one year. Typical pneumatic agitator motors blow compressed air across vanes and allow for large volumes of air to be exhausted without doing any work. The Carlisle Fluid Technologies rotary piston motor directs air into sealed piston chambers to make every CFM count.
*Actual savings dependent on many variables including environment and product configuration. Data based on Binks 15:1 geared agitator drive run 0-100 psi max, 50-150 rpm within a 1 poise fluid.
Features:
Instantly Know Your Agitator Speed
With the press of a button, Carlisle Fluid Technologies' rotary piston motors instantly indicate your RPM speed – ensuring you achieve the right balance between paint conditioning and energy efficient operation.
A Solution for Most Applications
With options for 5 gallon pails, pressure tanks, 55 gallon drums, day tanks, and totes, you’re sure to find the right Carlisle Fluid Technologies rotary piston motor solution for your paint kitchen.
Low Maintenance and Durable
No air line lubrication is required for the piston motor. Periodic greasing of the bearings will help extend its service life.
- Pressure Tanks
- Pails (5 Gallon)
- Large Tanks (30 & 60 Gallons)
- Stainless Steel Day Tanks
- Closed Drums (55 Gallon)
- Open Drums (55 Gallon)
- Tote/IBC (300 Gallon)
- Bare Motors
- Tank Mounts
Purchase a new 2 to 15 gallon stainless steel pressure tank complete with a 1/4 hp rotary piston agitator. Retrofit any existing Binks 183 Series pressure tank that has a 15:1 geared agitator.
| Stainless Steel Tank | 2 Gallon | 5 Gallon | 10 Gallon | 15 Gallon |
| Single (Regulated air to tank only) | ||||
| Double (Regulated air to tank and gun) | ||||
| Extra Sensitive | ||||
| Extra Sensitive w/ gun regulation | ||||
| 1/4 hp Air motor assembly to replace 15:1 geared drive |
Note: Suitable for viscosities up to 1000cP
| Part # | Description |
| 1/4 hp, c/w Tachometer, 3 blade prop, SS hinged lid assembly, siphon & return openings | |
| 1/4 hp, single 4.72” diameter paddle, 15.75” shaft (cover not included) | |
| 5 Gallon Pail Mount assembly without motor (refer to back page to pair with 1/8, ¼, ½ or 1 hp motor) |
Note: Suitable for viscosities up to 1000cP
Notes: Suitable for viscosities up to 1000cP
Mount and Motor Assembly
| Part # | Description |
| 1 hp, 3" Sanitary and Tachometer (1/2" Female Driveshaft) | |
| 1 hp, 4" Sanitary and Tachometer (1/2" Female Driveshaft) | |
| 1 hp, 3" Sanitary and Tachometer (5/8" Female Driveshaft) | |
| 1 hp, 4" Sanitary and Tachometer (5/8" Female Driveshaft) | |
| 1 hp, 3" Sanitary and Tachometer (3/4" Female Driveshaft) | |
| 1 hp, 4" Sanitary and Tachometer (3/4" Female Driveshaft) | |
| 1 hp, 3" Sanitary and Tachometer (5/8" Male Driveshaft) | |
| 1 hp, 4" Sanitary and Tachometer (5/8" Male Driveshaft) | |
| 1 hp, Tank Mount and Tachometer (1/2" Female Driveshaft) | |
| 1 hp, Tank Mount and Tachometer (5/8" Female Driveshaft) | |
| 1 hp, Tank Mount and Tachometer (3/4" Female Driveshaft) | |
| 1 hp, Tank Mount and Tachometer (5/8" Male Driveshaft) |
Note: Suitable for viscosities up to 1000cP
With built in shaft and agitator paddles
| Part # | Description |
| 1/2 hp, Bung mount and Tachometer | |
| 1 hp motor, Bung mount and Tachometer | |
| Bung Mount without motor (refer to back page to pair with ¼, ½ or 1HP bare motors) | |
| 1 hp, 23" Clamp mount and Tachometer | |
| 1 hp, 24" Clamp mount and Tachometer | |
| Bar mount mixer drive 23" bars (mount only) | |
| Bar mount mixer drive 24" bars (mount only) |
Note: Suitable for viscosities up to 1000cP
| Part # | Description |
| 1 hp, twin 7.87" diameter paddle, 31.5" shaft, (cover not included) | |
| 1 hp, twin 14-1/2" paddles, zinc plated cover | |
| 1 hp, twin 14-1/2" paddles, stainless steel cover | |
| 1 hp, twin 14-1/2" paddles agitator assembly (no cover) | |
| GEM2-D2D1R50 | 1/2" Acetal Gemini II package with 1 hp agitator, stainless steel siphon |
Note: Suitable for viscosities up to 1000cP
With built in shaft and agitator paddles
Notes: Suitable for viscosities up to 1000cP
Bracket is required for IBC connections
All motors have a maximum operating pressure of 90psi (6 bar) and include RPM speed indicator
| Model | Description | Max RPM | Min RPM | Torque | Air Consumption | Piston Seal Kit | Motor Repair Kit | Overhaul Kit |
| 1/8 HP, 3 Cylinder bare air motor | 800 | 20 | 8 in/lb | 0.78 CFM @ 200 RPM / 4.50 CFM @ 800 RPM (no load) | 31-550-K | 31-551-K | 31-552-K | |
| 1/4 HP, 3 Cylinder bare air motor | 800 | 20 | 12 in/lb | 0.78 CFM @ 200 RPM / 5.51 CFM @ 800 RPM (no load) | 31-553-K | 31-554-K | 31-555-K | |
| 1/2 HP, 6 Cylinder bare air motor | 600 | 20 | 26 in/lb | 1.38 CFM @ 200 RPM / 9.75 CFM @ 600 RPM (no load) | 31-556-K | 31-557-K | 31-558-K | |
| 1 HP, 6 Cylinder bare air motor | 400 | 25 | 60 in/lb | 2.53 CFM @ 200 RPM / 8.98 CFM @ 400 RPM (no load) | 31-559-K | 31-560-K | 31-561-K |
| Part # | Description |
| 3" sanitary mount, (5/8" Male Driveshaft) | |
| 3" sanitary mount, (1/2" Female Driveshaft) | |
| 3" sanitary mount, (5/8" Female Driveshaft) | |
| 3" sanitary mount, (3/4" Female Driveshaft) | |
| 4" sanitary mount, (5/8” Male Driveshaft) | |
| 4" sanitary mount, (1/2" Female Driveshaft) | |
| 4" sanitary mount, (5/8” Female Driveshaft) | |
| 4" sanitary mount, (3/4" Female Driveshaft) | |
| 1/2" female driveshaft, 3 Hole gasket - Includes 3.220, 3.350 and 4.060" hole patterns | |
| 5/8" female driveshaft, 3 Hole gasket - Includes 3.220, 3.350 and 4.060" hole patterns | |
| 3/4" female driveshaft, 3 Hole gasket - Includes 3.220, 3.350 and 4.060" hole patterns | |
| 5/8” male driveshaft, 3 Hole gasket - Includes 3.220, 3.350 and 4.060” hole patterns | |
| 31-564-K | Bearing and seal kit for the tank mounts |
Requires the selection of a motor. Mounts only are suitable for ¼, ½, or 1 hp motors.