Wagner Cobra
- Information
- Part Numbers
- Specifications
- Literature
- Videos
High efficiency
• The particularly small volume of the fluid section, combined with the high stroke frequency, results in a performance level comparable to much larger piston pumps - but with remarkably less effort and consumption during flushing and color changes.
Flexible applications
• Ideally suited for single coating stations up to complex multicolor systems.
High surface quality
• The pump works practically pulsation-free and thus enables an absolutely constant paint flow for a perfect spray jet and very high surface quality.
Wagner Cobra – High Pressure Diaphragm Pumps
The Wagner Cobra is a high-pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar/3,625 psi.
The Cobra is the first high-pressure pneumatic pump without packings. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones, including reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials.
The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations.
Suitable for many materials
• Due to low shear and hermetically encapsulated design of the Cobra, almost all materials can be processed. These include shear-sensitive, moisture-sensitive and abrasive materials - independent whether water- or solvent-based.
Suitable for frequent color changes
• The reduced internal volume leads to a significantly reduced solvent consumption during the spraying process. The Cobra is therefore the ideal pump for frequent color changes.
Spray Pack
Includes:
Accessories
Cobra 40-10
Part Number | Description |
Diaphragm pump Cobra 40-10 | |
Hydraulic oil (for pressure stage) 250 ml; 250 cc | |
Grounding cable 3 m; 9.8 ft | |
AirCoat filter pressure regulator | |
341434 | Double open-end wrench |
Inline filter, HL DN6-PN270-G1/4"-SSt | |
Fitting, DF-MM-R1/4"-M12-PN270-SSt | |
Fitting, SF-FF-G3/8-G1/4-530 bar-SSt | |
Fitting, EF-FM-G1/4-G1/4-530 bar-SSt | |
Fitting RF-FM-G3/8-1/4NPSM-530 bar-SSt | |
Air suction filter DN25 | |
Return hose DN6-PN310-G1/4"-PA | |
DN25 suction hose | |
Return tube for item 15 | |
5-liter hopper set for Cobra | |
AirCoat regulator set | |
DN16 suction hose | |
Fitting, DF-MM-G1/4-1/4NPSM-530 bar-SSt | |
Fitting RF-FM-G3/8-3/8NPSM-530 bar-SSt | |
Frame, complete | |
Wall mount 4", complete | |
Wall mounting long | |
Air suction filter DN16 | |
Trolley 4", complete | |
2 L tank for Cobra | |
20 L tank for Cobra | |
2345265 | Exhaust pipe 20L |
3767 | Filter disk D51 |
Drum cover 365-B | |
Drumcover 365-E | |
Cobra trolley, complete | |
Inline filter DN6-PN270-G1/4"-SSt | |
Fitting RF-FM-G1/4-1/4NPSM-530 bar-SSt | |
Oil filling set with 100 ml; 100 cc syringe | |
Air coupling set DN 10 mm; 0.39 inch | |
Hose connector with sealing ring | |
Fitting SF-MM-G3/8"-M24-PN530-SSt | |
HP filter DN12-PN530-CS, complete | |
Fitting, DF-MM-G3/8-G3/8-530 bar-SSt | |
9974112 | Sealing ring for G3/8 thread |
Cobra 40-25
Part Number | Description |
Diaphragm pump Cobra 40-25 | |
Hydraulic oil (for pressure stage) 250 ml; 250 cc | |
Grounding cable 3 m; 9.8 ft | |
2333479 | AirCoat filter pressure regulator |
341434 | Double open-end wrench |
Inline filter, HL DN6-PN270-G1/4"-SSt | |
Fitting, DF-MM-R1/4"-M12-PN270-SSt | |
Fitting, SF-FF-G3/8-G1/4-530 bar-SSt | |
Fitting, EF-FM-G1/4-G1/4-530 bar-SSt | |
Fitting RF-FM-G3/8-1/4NPSM-530 bar-SSt | |
Air suction filter DN25 | |
Return hose DN6-PN310-G1/4"-PA | |
DN25 suction hose | |
Return tube for item 15 | |
5-liter hopper set for Cobra | |
AirCoat regulator set | |
DN16 suction hose | |
Fitting, DF-MM-G1/4-1/4NPSM-530 bar-SSt | |
Fitting RF-FM-G3/8-3/8NPSM-530 bar-SSt | |
Cobra 40-25 frame | |
Wall mount 4", complete | |
Wall mounting long | |
Air suction filter DN16 | |
Trolley 4", complete | |
20 liter tank | |
2345265 | Exhaust pipe 20L |
3767 | Filter disk D51 |
Drum cover 365 B | |
Drumcover 365-E | |
Cobra trolley, complete | |
Inline filter DN6-PN270-G1/4"-SSt | |
Fitting RF-FM-G1/4-1/4NPSM-530 bar-SSt | |
Oil filling set with 100 ml; 100 cc syringe | |
Air coupling set DN 10 mm; 0.39 inch | |
Hose connector with sealing ring | |
Fitting SF-MM-G3/8"-M24-PN530-SSt | |
HP filter DN12-PN530-CS, complete | |
Fitting, DF-MM-G3/8-G3/8-530 bar-SSt | |
2330780 | Fitting, DF-MM-G1/2-G3/8-530 bar-SSt |
Fitting, SF-FM-G3/8-G1/2-530 bar-SSt | |
9974112 | Sealing ring for G3/8 thread |
3051041 | Sealing ring for G1/2 thread |
Wagner Cobra 40-10
Technical Data | |
Application area | Metal coating, Protective coating, Wood coating, Demolding and separating |
Application technique | Airless, AirCoat |
Processable materials | Water-borne, Solvent-borne, Abrasive, shear sensitive, sensitive to moisture |
Material wetted parts | Nickel-plated aluminum, Stainless steel, Tungsten carbide |
Certification | Complies with ATEX directive, Complies with CE directive |
Weight | 19 kg |
Material outlet | M G 3/8'' |
Compressed air connection | F G 1/2'' |
Air inlet pressure | 2.5-6 bar |
Max. material pressure | 250 bar |
Volumetric flow per double stroke | 10 cm³ |
Volumetric flow per minute | 2 l/min |
Max. stroke rate | 200 1/min |
Sound level at 6 bar air pressure | 74 dB(A) |
Max. allowed inclination | 10 ° |
Transmission ratio | 40 :1 |
Material pH value | 9-3.5 pH |
Material temperature | 10-80 °C |
Wagner Cobra 40-25
Technical Data | |
Application area | Metal coating, Protective coating, Wood coating, Demolding and separating |
Application technique | Airless, AirCoat |
Processable materials | Water-borne, Solvent-borne, Abrasive, shear sensitive, sensitive to moisture |
Processable materials | Nickel-plated aluminum, Stainless steel, Tungsten carbide |
Certification | Complies with ATEX directive, Complies with CE directive |
Weight | 32 kg |
Material outlet | M G 3/8'' |
Compressed air connection | F G 1/2'' |
Air inlet pressure | 2.5-6.25 bar |
Max. material pressure | 250 bar |
Volumetric flow per double stroke | 25 cm³ |
Volumetric flow per minute | 5 l/min |
Max. stroke rate | 200 1/min |
Sound level at 6 bar air pressure | 76 dB(A) |
Max. allowed inclination | 10 ° |
Transmission ratio | 40 :1 |
Material pH value | 3.5-9 pH |
Material temperature | 10-80 °C |