Description
Includes Pump, Gravity Tripod Mount, and LVMP Trophy Gun
- Acetal pump body with st. st. balls and soft seats for universal paint compatibility including ceramic glaze coatings
- The unique diaphragm design and “built in” fluid regulator provide consistent pressure and readily adjustable paint flow
- The Non-stall air valve provides smooth, quiet and surge free paint delivery up to 1000 cc/ minute
- Clearly labelled Air regulators provide independent control of pump and spray gun fluid and air pressures
- Quick release air, fluid inlet and outlet connections for faster maintenance
- Re-circulation/dump valve accessory for faster colour changes reducing down time, saving time and money
- Pump outfit mountings include Cart, Wall, 25L Pail & Tripod outfits with or without spray guns & hoses
- Outfits with Fluid filter are available for finer paint finishes
The DX70 is a high specification, air powered 1:1 ratio double diaphragm pump specifically developed for the direct supply of paints and materials to spray guns. The pump features a unique diaphragm no-crease shape for a long and durable working life DX70 also includes a “built-in” fluid regulator which ensures a constant and virtually pulse free fluid delivery, for direct feed to spray guns without the expense and complications of an additional fluid regulator or surge chamber.
The Binks DX70 range features bare pumps,assembled pump packages and complete “ready to spray” outfits matched with our World renowned DeVilbiss spray guns. Binks DX70 is perfect for use with ALL TYPES of spray gun technologies including, Conventional, Compliant Trans-Tech©, HVLP, LVLP and low pressure Electrostatic guns.
APPLICATIONS
- Woodworking and Joinery
- Aerospace Industry
- Agricultural and Off Road
- Potteries and Ceramic Glaze*
- Trade Coaters and Jobbers
- Marine Industry
- Truck and Bus
- Rail and Transport
- Plus Many Others:
TYPICAL MATERIAL/COATING TYPES
- Solvent and Water Based Paints and Materials
- Lacquers, Stains and Varnishes
- Adhesives and Fillers
- Ceramics and Glaze*
- Sealers and Undercoats
- Plus Many Others:
*The standard pump without fluid regulator can also be used on ceramic glaze applications.
| Pump Ratio | 1 to 1 |
| Max. Air Pressure | 7 Bar / 100 PSI |
| Max. Fluid Pressure | 7 Bar / 100 PSI |
| Nominal Flow Volume / Cycle | 0.07 Litres (0.018 US Gall) |
| Fluid Output @ 60 cycles/min | 4.2 Litres / min (1.1 US Gall / min) |
| Max Recommended Continuous Cycle Rate | 10 Cycles /min |
| Max Recommended Intermittent Cycle Rate | 30 Cycles /min |
| Inlet Fluid Connection | 3/8” Universal (BSPP/NPSM) Male or Female |
| Outlet Fluid Connection | 3/8” Universal (BSPP/NPSM) Male or Female |
| Maximum Dry/Wet Lift | 6.6m (21.8 feet) |
| Air Inlet | G1/4” (BSPP) Female |
| Fluid Regulator | Pilot Ø4 Tube |
| Air Volume / cycle @ 6.9Bar/100psi | 0.77L (0.027SCFM) |
| Air Flow @ 10 cycles/min 6.9 bar/100psi | 7.7L/min (0.27SCFM/min) |
| Air Flow @ 30 cycles/min 6.9 bar/100psi | 23.2L/min (0.82SCFM/min) |
| Air Quality ISO 8573.1 Class 3.3.2 # | Dirt 5 microns |
| Water -20°C@7bar (940ppm) | |
| Oil 0.1mg/m3 | |
| Non Lubricated | |
| Noise Level | 68db LAeq |
| Earth (Air Inlet Cover) | <1Ω |
| Weight – Bare Pump | 2.2 Kg (4.9 lbs) |