Hosco H Valve Assembly 3/8" NPS(M) X 1/2" BTF (H-200)

Hosco “H-Valve” assemblies are designed to provide an integral bypass to circulate paint or fluid properly during service time or maintenance interval periods. This eliminates the need to add external hose jumpers or hard tube restrictor stations during service time or maintenance interval periods. There are many configurations available on the inlet and outlet compression connections (1/4”, 3/8”, ½”, 8mm, 10mm, 12mm) and all in booth side connections are typically 3/8” NPS(M). The bulkhead wall mounted H-Valve assembly can be constructed to be operated from inside the spray zone (standard bulkhead models) or outside the spray zone (reverse bulkhead models).

Feature and Benefits

Complete Paint Station Assembly

• Saves assembly cost on site, ready to install and make connections to piping system and spray equipment

SST Construction

• 304L/316 materials compatible with all coatings

• Long life

Low Shear Design

• Large flow passageways minimize shear and coating degradation and subsequent pressure or flowrate losses

Permanent Integral Bypass

• Safe bypass method even during “hot work” in booth area

• Immediately available for bypass when needed