Description
Fine Finish at Extreme Transfer Efficiency — C.A. Technologies CAT-Xpress Smart Pack (CAT-XPR)
The C.A. Technologies CAT-Xpress CAT-XPR Smart Pack is a professional-grade pressure feed fine finish spray gun that ships ready to configure — including the gun, three nozzle and needle setups (0.8mm, 1.3mm, and 1.8mm), both the HVLP and pressure-reduced air caps, tools, and a carrying case in a single package. The CAT-Xpress is engineered for extreme atomization with a precision air cap design that keeps particle size at the absolute finest, combined with high transfer efficiency that reduces material waste and overspray compared to conventional air spray setups. The thread-less fluid tip design makes nozzle swaps fast and tool-free, the handle-mounted fan control allows one-handed quarter-turn pattern adjustment without stopping to reach the gun head, and the built-in air adjustment valve at the handle gives immediate atomization control during application. All stainless steel fluid passages, 9 CFM air consumption — works with a 30-gallon compressor minimum — and US made by C.A. Technologies in Louisville, CO. Call or text 586-210-0555 for nozzle selection guidance and availability before you order.
✓ HVLP & pressure-reduced air caps included • ✓ 0.8mm, 1.3mm & 1.8mm nozzle/needle sets included • ✓ Thread-less fluid tip — tool-free swap • ✓ 9 CFM — 30-gallon compressor minimum • ✓ Handle-mounted fan & air controls • ✓ US Made — CET Verified
Model: CAT-XPR • Kit Type: Smart Pack • Feed: PRESSURE • Air Caps: HVLP (2403233) & Pressure-Reduced (2403218) • CFM: 9 @ 29 PSI
Nozzle Sets: 0.8mm, 1.3mm, 1.8mm (included) • Repair Kit: 2411779 • CET Verified Configuration
Overview
At a Glance
Specifications
Tech Specs
| Model | CAT-XPR (Smart Pack) |
| Air Caps Included | 2403218 Pressure-Reduced & 2403233 HVLP — both caps included, swap to meet local VOC compliance requirements |
| Nozzle/Needle Sets Included | 0.8mm (2404488/2397054), 1.3mm (2412850/2412848), 1.8mm (2404493/2397059) |
| Feed Type | PRESSURE — requires pressurized fluid supply (cup, pot, or pump) |
| Max Gun Inlet Pressure | 29 PSI (pressure-reduced) / 26 PSI (HVLP) |
| Air Consumption | 9 CFM @ 29 PSI — requires minimum 30-gallon compressor at 90 PSI rated output; one of the most compressor-friendly fine finish setups available |
| Max Pattern Width | 13" pressure-reduced / 12" HVLP — wide fan for production finishing; one-handed quarter-turn handle adjustment during spraying |
| Air Inlet | Handle mount — standard shop air connection at handle for balanced weight distribution |
| Fluid Inlet | Standard pressure feed fluid connection — connects to 1QT cup, 2QT cup, or tank systems |
| Fluid Tip Design | Thread-less construction — swap nozzle sizes without tools; faster changeover between material viscosities |
| Fan Control | Handle-mounted, quarter-turn — one-handed adjustment without stopping application or repositioning the gun |
| Air Adjustment Valve | Built-in at handle — immediate atomization adjustment at the gun without returning to the regulator |
| Fluid Passages | All Stainless Steel — chemical resistance to solvent-based and waterborne coatings, automotive finishes, and industrial topcoats |
| Repair Kit | 2411779 — all seals, o-rings, needle packing, and springs for a complete rebuild |
| Fulfillment | Most in-stock orders ship same day — stocked at C.A. Technologies’ Colorado facility. Call or text 586-210-0555 to confirm availability. |
| Origin | US Made — C.A. Technologies (Louisville, CO) |
Application
CET Application Match — Best for This Setup
The CET Preferred Setup for fine finish pressure feed work where spray code compliance and atomization quality both matter on the same job. Based on over 20 years supplying industrial finishing equipment, CET’s technical team specifies the CAT-Xpress for automotive refinishing, custom fabrication shops, industrial and commercial finishing operations, and woodworking facilities that need a single gun capable of running everything from very thin stains and sealers through automotive clearcoats and epoxy primers — with both HVLP and pressure-reduced caps on hand to meet state or facility compliance requirements without purchasing a second gun.
Common Questions
Frequently Asked Questions
- What is the difference between the CAT-XPR Smart Pack and the CAT-XPR-303R2 or CAT-XPR-PPSR2?
- All three kits include the same CAT-Xpress gun, both air caps, all three nozzle/needle sets, and tools. The Smart Pack is the gun and accessories only — no fluid supply included. The 303R2 adds a 1QT aluminum pressure cup with regulator. The PPSR2 adds a 3M PPS 2.0 850mL pressure cup, regulator, and three lids/liners for disposable cup convenience. If you already have a pressure supply, the Smart Pack is the most economical entry point.
- What compressor do I need for 9 CFM?
- 9 CFM at 29 PSI gun inlet pressure is achievable with a 30-gallon compressor rated at 90 PSI output — one of the lowest air consumption requirements in the professional fine finish gun category. Most single-phase shop compressors in the 25–60 gallon range handle the CAT-Xpress comfortably. If you’re running multiple guns off the same line, call or text 586-210-0555 for sizing guidance.
- Does the CAT-Xpress meet HVLP compliance requirements?
- Yes — the included HVLP air cap (2403233) is designed for areas requiring HVLP compliance and runs at 26 PSI gun inlet pressure. The pressure-reduced cap (2403218) runs at 29 PSI and is designed to meet US pressure-reduced regulations. Both caps are included in the Smart Pack. Check your local regulations to confirm which cap applies to your facility or jurisdiction.
- What nozzle sizes are available beyond the three included?
- The CAT-Xpress fluid tip system covers 0.8mm through 2.2mm. Sizes available beyond the included 0.8mm, 1.3mm, and 1.8mm include 1.0mm, 1.2mm, 1.4mm, 1.5mm, 2.0mm, and 2.2mm — all available as replacement tips. For heavy body materials over 30 sec. Zahn #2 requiring 2.0mm or 2.2mm, the 2403224 or 2403235 air caps are also required. Call or text 586-210-0555 to confirm the right nozzle for your material.
- What repair kit does the CAT-Xpress use?
- The CAT-Xpress uses repair kit 2411779, which includes all wear seals, o-rings, needle packing assembly, and springs for a complete gun rebuild. CET stocks repair kits for same-day shipment — call or text 586-210-0555 to confirm availability.
- Where can I find the full CAT-Xpress parts manual?
- The full parts manual with exploded diagram, air cap chart, nozzle selection guide, and replacement part numbers is available via the download button below. CET includes documentation with every order.
Why Buy From CET
The CET Difference
- Over 20 years supplying industrial finishing equipment — CET has been matching customers to the right C.A. Technologies setup since the beginning. We know these guns inside and out.
- Real technical support before and after the sale — call or text 586-210-0555 to reach CET’s technical team directly. We’ll confirm your nozzle selection and pressure setup before you order so you get it right the first time.
- Fast fulfillment on most in-stock orders — C.A. Technologies stocks these guns at their Colorado facility and most orders ship same day. Call or text 586-210-0555 to verify availability and confirm your ship date before ordering.
- Verified part compatibility — every configuration on this page is CET Verified. We stock the gun, the repair kit, replacement nozzles, and air caps — so you’re never waiting on back-ordered components.
- Documentation included — every order ships with access to the full parts manual, nozzle chart, and air cap selection guide. No hunting for documentation after the sale.
- The best order fulfillment in the industry — you receive updates at every step of the process so you know exactly where your order is at all times. And in the rare case there’s a delay, we’ll let you know in advance — so you’re never chasing an order down again.
Why Choose the CAT-Xpress
Purpose-Built for Fine Finish Where Transfer Efficiency and Compliance Both Matter
The CAT-Xpress is C.A. Technologies’ answer to the fine finish operator who needs extreme atomization quality, HVLP and pressure-reduced compliance in the same gun, and ergonomics designed for all-day production use — without the air consumption demands of conventional spray guns.
- Precision engineered air caps: Both HVLP and pressure-reduced caps are designed to keep atomization particle size at the absolute finest — consistent finish quality across the full nozzle range.
- Thread-less fluid tip: Swap nozzle sizes without tools — faster changeover between materials or viscosities during a shift, and more consistent nozzle seating than threaded designs.
- Handle-mounted fan and air controls: Quarter-turn fan adjustment and built-in air valve at the handle means one-handed pattern and atomization adjustment without stopping application — critical on production finishing lines.
- All stainless steel fluid passages: Chemical resistance to solvent-based coatings, waterborne finishes, automotive materials, and industrial topcoats across all included nozzle sizes.
- 9 CFM total air consumption: Professional fine finish performance at less than half the air demand of conventional spray guns — practical for smaller shops and mobile setups without sacrificing atomization quality.
CAT-Xpress Product Manual
Full parts diagram, nozzle/air cap selection chart, application guide & replacement part numbers
Download the CAT-Xpress ManualNot Sure Which Kit or Nozzle Is Right for Your Application?
Contact CET’s technical support team with your material type, viscosity, and compliance requirements. Based on over 20 years of industrial finishing equipment experience, we’ll confirm the correct nozzle, air cap, and kit configuration — and verify same-day availability. Call or text 586-210-0555.
