Description
C.A. Technologies Panther 100G — P100G-12-2263 (1.2mm Nozzle, 2263 Air Cap)
The C.A. Technologies Panther 100G P100G-12-2263 is a 1.2mm PTFE coated conventional pressure feed spray gun paired with the 21-2263 air cap — a lower-SCFM pressure configuration for thin-to-medium adhesives, primers, and coatings where controlled flow at 1.2mm is the priority over maximum fan width.
✓ 1.2mm stainless orifice • ✓ PTFE coated body & air cap • ✓ Pressure feed — consistent flow control • ✓ 14 SCFM @ 50 PSI • ✓ 14" max fan • ✓ US Made — CET Verified
Model: P100G-12-2263 • Nozzle: 1.2mm (.046") • Air Cap: 21-2263 • Feed: PRESSURE • SCFM: 14 @ 50 PSI
Fan Control: 60-1500 (included) • Repair Kit: 10-110 • Max Inlet Pressure: 50 PSI • CET Verified Configuration
Overview
At a Glance
Specifications
Tech Specs
| Model | P100G-12-2263 |
| Fluid Nozzle | 31-0612 — 1.2mm (.046") 17-4PH Stainless |
| Air Cap | 21-2263 — Pressure, 14 SCFM |
| Needle | 40-1110 (110) |
| Feed Type | PRESSURE |
| Max Inlet Pressure | 50 PSI |
| Air Consumption | 14 SCFM @ 50 PSI |
| Max Pattern Width | 14" |
| Air Inlet | 1/4" NPS (m) |
| Fluid Inlet | 3/8" NPS (m) |
| Body | Forged Aluminum — PTFE Hard Coat |
| Fluid Passages | All Stainless Steel |
| Fan Control | 60-1500 (included) |
| Repair Kit | 10-110 |
| Fulfillment | Most in-stock orders ship same day — stocked at C.A. Technologies’ Colorado facility. Call or text 586-210-0555 to confirm availability. |
| Origin | US Made — C.A. Technologies |
Application
CET Application Match — Best for This Setup
The CET Preferred Setup for controlled pressure feed at 1.2mm where lower SCFM and a standard aluminum cap are the right fit. Based on over 20 years supplying industrial finishing equipment, CET’s technical team recommends the P100G-12-2263 for cabinet shops and industrial finishing operations running thin contact cements, epoxy primers, and medium body coatings where precise orifice control at pressure matters more than maximum air volume or fan width.
Common Questions
Frequently Asked Questions
- What is the difference between the P100G-12-2263 and P100G-12-2266-3T?
- Both use the 1.2mm fluid nozzle (31-0612) under pressure. The 21-2263 runs at 14 SCFM with a 14" fan and standard aluminum cap. The 21-2266-3T runs at 16.2 SCFM with a 15" fan and PTFE coated cap. Choose the 2263 for controlled low-flow pressure work without the PTFE premium. Choose the 2266-3T when you need maximum air volume, wider fan, and non-stick adhesive cleanup. Call or text 586-210-0555 to confirm.
- What is the difference between the P100G-12-2263 and P100G-12-2266T?
- Both use the 1.2mm nozzle. The 21-2263 is a pressure cap at 14 SCFM with a 14" fan — requires pressurized fluid supply. The 21-2266T is a siphon cap at 12 SCFM with a 10" fan and PTFE coating — no pressure supply needed. Choose the 2263 when pressure feed consistency is required; choose the 2266T for siphon convenience.
- What materials work best with a 1.2mm fluid nozzle?
- The 1.2mm orifice handles thin-to-medium viscosity materials in the 16–25 second Zahn #2 range — thin contact cements, lacquers, epoxy primers, enamels, and sealers. For thicker materials in the 25–30 sec. range, step up to 1.3mm or 1.5mm. CET can confirm the right orifice for your material — call or text 586-210-0555.
- What repair kit does the Panther 100G use?
- All Panther 100G configurations use repair kit 10-110, which includes all wear seals, o-rings, springs, and needle seal components for a complete rebuild. Call or text 586-210-0555 to confirm availability for same-day shipment.
- What needle does the 1.2mm nozzle use?
- The 1.2mm fluid nozzle (31-0612) uses the 40-1110 (110) needle assembly — shared with the 1.0mm and 1.3mm configurations. CET stocks replacement needles for same-day shipment.
- Where can I find the full Panther 100G parts manual?
- The full parts manual with exploded diagram, parts list, and air cap chart is available on the Panther P100G Spare Parts page or via the download button below. CET includes documentation with every order.
All Configurations
Find the Right Panther 100G for Your Application
The Panther 100G is available in 19 configurations across siphon, pressure, and waterborne adhesive setups. All configurations are CET Verified — supported by CET’s technical team and fulfilled through C.A. Technologies’ Colorado facility. Contact CET for a CET Application Match recommendation.
| Model | Nozzle | Air Cap | Feed | SCFM | Best For | Order |
|---|---|---|---|---|---|---|
| P100G-10-2266-3T | 1.0mm | 21-2266-3T | PRESSURE | 16.2 | Thin adhesives, sealers | Order |
| P100G-12-2266T | 1.2mm | 21-2266T | SIPHON | 12 | Medium coatings, lacquers | Order |
| P100G-12-2266-3T | 1.2mm | 21-2266-3T | PRESSURE | 16.2 | Thin-medium adhesives, lacquers | Order |
| P100G-12-2263 | 1.2mm | 21-2263 | PRESSURE | 14 | Medium adhesives, primers | Current |
| P100G-13-2266-3T | 1.3mm | 21-2266-3T | PRESSURE | 16.2 | Medium adhesives, epoxy primers | Order |
| P100G-13-2263 | 1.3mm | 21-2263 | PRESSURE | 14 | Medium adhesives, coatings | Order |
| P100G-15-2266-3T | 1.5mm | 21-2266-3T | PRESSURE | 16.2 | Adhesives, medium-heavy coatings | Order |
| P100G-15-2263 | 1.5mm | 21-2263 | PRESSURE | 14 | Adhesives, medium-heavy | Order |
| P100G-15-2266T | 1.5mm | 21-2266T | SIPHON | 12 | Medium-heavy coatings, light adhesives | Order |
| P100G-18-2266-3T | 1.8mm | 21-2266-3T | PRESSURE | 16.2 | Adhesives, heavy coatings | Order |
| P100G-18-2266-3 | 1.8mm | 21-2266-3 | PRESSURE | 16.2 | Epoxies, high solid coatings | Order |
| P100G-18-2263 | 1.8mm | 21-2263 | PRESSURE | 14 | Adhesives, heavy body | Order |
| P100G-18-2466 | 1.8mm | 21-2466 | SIPHON | 15 | Heavy coatings, primers | Order |
| P100G-18-1590 | 1.8mm | 1590 | WATERBORNE | — | Waterborne adhesives — anti-shear | Order |
| P100G-22-2167 | 2.2mm | 21-2167 | PRESSURE | 14.5 | Heavy adhesives, high solid coatings | Order |
| P100G-22-2267 | 2.2mm | 21-2267 | PRESSURE | 15 | Heavy adhesives, high solid coatings | Order |
| P100G-22-2467 | 2.2mm | 21-2467 | SIPHON | 15 | Heavy coatings, high viscosity | Order |
| P100G-28-2168 | 2.8mm | 21-2168 | PRESSURE | 14 | Ultra-heavy adhesives & coatings | Order |
| P100G-28-2268 | 2.8mm | 21-2268 | SIPHON | 15 | Ultra-heavy coatings | Order |
PRESSURE requires pressurized fluid supply SIPHON works with standard siphon cup WATERBORNE anti-shear setup for waterborne adhesives
Why Buy From CET
The CET Difference
- Over 20 years supplying industrial finishing equipment — CET has been matching customers to the right C.A. Technologies configuration since the beginning. We know these guns inside and out.
- Real technical support before and after the sale — call or text 586-210-0555 to reach CET’s technical team directly. We’ll confirm your nozzle, air cap, and setup before you order so you get it right the first time.
- Fast fulfillment on most in-stock orders — C.A. Technologies stocks these guns at their Colorado facility and most orders ship same day. Call or text 586-210-0555 to verify availability and confirm your ship date before ordering.
- Verified part compatibility — every configuration on this page is CET Verified. We stock the gun, the repair kit, the air caps, and the spare parts — so you’re never waiting on back-ordered components.
- Documentation included — every order ships with access to the full parts manual, air cap chart, and nozzle selection guide. No hunting for documentation after the sale.
- The best order fulfillment in the industry — you receive updates at every step of the process so you know exactly where your order is at all times. And in the rare case there’s a delay, we’ll let you know in advance — so you’re never chasing an order down again.
Why Choose the Panther 100G
PTFE Coated Durability for Demanding Applications
The Panther 100G is the only gun in the C.A. Technologies conventional lineup with a PTFE hard coat on both the gun body and air cap — the critical advantage when spraying adhesives and aggressive coatings that foul standard aluminum gun bodies.
- PTFE hard coat body & air cap: Prevents adhesive bonding, dramatically reducing cleaning time and extending component life.
- All stainless steel fluid passages: Full chemical resistance across solvent-based, waterborne, and aggressive adhesive formulations.
- Heavy duty needle spring: Consistent trigger response and needle return under continuous production use.
- Forged aluminum body: Lightweight and durable — built for all-day production use without fatigue.
- 17 air cap options: From 0.6mm siphon to 2.8mm pressure — one platform covers the full range of coating viscosities.
Outfits & Configurations
Available Outfits
| Part Number | Type | Description |
|---|---|---|
| OP100G-130 | 2 Quart Outfit (Economy) | Includes 5' hose assemblies |
| OP100G-600 | 2 Quart Outfit (Bandit) | Includes 5' hose assemblies |
| Tank Outfits | 2.5, 5, 10, 12.5, 15 Gallon | Includes 25' hose assemblies — suitable for continuous production runs |
Panther 100G Product Manual
Full parts diagram, air cap chart, nozzle selection guide & replacement part numbers for all P100G configurations
Download the Panther 100G ManualNeed Help Selecting the Right Configuration?
Contact CET’s technical support team with your material type, viscosity, and feed preference. Based on over 20 years of industrial finishing equipment experience, we’ll confirm the correct Panther 100G nozzle and air cap combination and verify same-day availability. Call or text 586-210-0555.
