C.A. Technologies Panther 100G — P100G-28-2168 (2.8mm Nozzle, 2168 Air Cap)

The C.A. Technologies Panther 100G P100G-28-2168 is a 2.8mm PTFE coated conventional pressure feed spray gun paired with the 21-2168 air cap — one of C.A. Technologies’ specifically recommended configurations for the heaviest adhesive applications. At 14 SCFM and pressure feed, this setup delivers consistent, controlled flow of ultra-heavy body adhesives, thick industrial coatings, and high viscosity materials that demand both maximum orifice size and the flow consistency only pressure feed can provide. Used in industrial laminating, furniture manufacturing, and heavy production finishing operations where thick contact cements and ultra-heavy coatings are applied at volume daily. The PTFE hard coat on both the gun body and air cap resists material buildup and simplifies cleanup. All stainless steel fluid passages. US made. Call or text 586-210-0555 for setup guidance and availability before you order.

Overview

At a Glance

• Configuration: 2.8mm stainless steel fluid nozzle + 21-2168 pressure air cap — CET Verified Configuration
• Best for: Ultra-heavy adhesives, thick industrial coatings, and high viscosity materials over 30 sec. Zahn #2 requiring pressure feed consistency at maximum orifice
• Feed type: PRESSURE — steady high-volume delivery for demanding production adhesive applications
• Air consumption: 14 SCFM @ 50 PSI max inlet
• Body: PTFE hard coat anodized forged aluminum — resists adhesive and coating buildup for fast cleanup
• Fluid passages: All stainless steel for full chemical resistance
• Fast fulfillment — most in-stock orders ship same day. Call or text 586-210-0555 to verify availability before you order.
• Origin: US Made by C.A. Technologies (Louisville, CO) — distributed by CET for over 20 years

Specifications

Tech Specs

Application

CET Application Match — Best for This Setup

The P100G-28-2168 is the CET Preferred Setup for the most demanding adhesive and heavy coating applications — combining the maximum 2.8mm orifice with pressure feed for reliable, high-volume delivery of ultra-heavy materials. C.A. Technologies specifically recommends the 21-2168 for adhesive applications at 2.8mm. Based on over 20 years supplying industrial finishing equipment, CET’s technical team specifies this configuration for industrial laminating operations and production lines running the thickest contact cements and high-solid industrial coatings where siphon feed can’t maintain consistent flow at volume.

The 12" maximum fan at 14 SCFM keeps the pattern controlled and focused — particularly useful for targeted adhesive application on narrow substrates, edge work, and detail laminating where precision matters alongside volume. For wider coverage at 2.8mm from a siphon cup, the P100G-28-2268 is the alternative.

• Industrial laminating lines: Maximum orifice under pressure ensures consistent adhesive delivery across high-volume production runs without flow variation
• Furniture and millwork manufacturing: Used daily for heavy contact cement application on case goods, panel laminates, and edge banding production
• Ultra-heavy body coatings: 2.8mm pressure feed handles materials over 30+ sec. Zahn #2 that restrict or spit through smaller orifices
• Precision adhesive application: 12" controlled fan pattern delivers targeted coverage on narrow substrates and detail work

Common Questions

Frequently Asked Questions

What is the difference between the P100G-28-2168 and P100G-28-2268?

Both use a 2.8mm fluid nozzle. The P100G-28-2168 uses the 21-2168 pressure air cap at 14 SCFM — requiring a pressurized fluid supply and delivering the most consistent flow control for heavy production runs. The P100G-28-2268 uses the 21-2268 siphon air cap at 15 SCFM — no pressure supply needed, suited for batch work and portable applications. CET recommends the pressure configuration when flow consistency across a full tank run is critical.

Why choose pressure feed at 2.8mm over siphon?

At 2.8mm orifice with ultra-heavy materials, pressure feed is the CET-recommended approach for production operations. Pressure feed maintains consistent flow regardless of cup level, material viscosity variation, or spray angle — all of which can cause siphon feed to sputter or drop off with the thickest adhesives. For continuous production runs of heavy laminating adhesives, pressure feed with a tank outfit is the more reliable setup.

Is a carbide nozzle available at 2.8mm for abrasive materials?

Yes — the 31-0628V carbide nozzle is a drop-in replacement for the standard 2.8mm stainless nozzle and extends service life significantly when spraying abrasive or particle-laden heavy coatings. CET’s team can advise on whether carbide is warranted for your application — call or text 586-210-0555.

What repair kit does the Panther 100G use?

All Panther 100G configurations use repair kit 10-110, which includes all wear seals, o-rings, springs, and needle seal components for a complete rebuild. Call or text 586-210-0555 to confirm availability for same-day shipment.

What tank outfit do you recommend for production adhesive runs with this setup?

For continuous production adhesive application with the P100G-28-2168, CET recommends pairing with a 5, 10, or 15 gallon pressure tank outfit with 25’ hose assemblies. This eliminates re-cupping downtime and provides the stable fluid pressure needed for consistent 2.8mm flow across long production runs. Call or text 586-210-0555 and we’ll spec the right outfit for your operation.

Where can I find the full Panther 100G parts manual?

The full parts manual with exploded diagram, parts list, and air cap chart is available on the Panther P100G Spare Parts page or via the download button below. CET includes documentation with every order.

All Configurations

Find the Right Panther 100G for Your Application

The Panther 100G is available in 19 configurations across siphon, pressure, and waterborne adhesive setups. All configurations are CET Verified — supported by CET’s technical team and fulfilled through C.A. Technologies’ Colorado facility. Use the table below to find the right nozzle and air cap combination for your material, or contact CET for a CET Application Match recommendation.

PRESSURE requires pressurized fluid supply    SIPHON works with standard siphon cup    WATERBORNE anti-shear setup for waterborne adhesives

Why Buy From CET

The CET Difference

Why Choose the Panther 100G

PTFE Coated Durability for Demanding Applications

The Panther 100G is the only gun in the C.A. Technologies conventional lineup with a PTFE hard coat on both the gun body and air cap. This matters most when spraying adhesives, contact cements, and other sticky or aggressive coatings that tend to foul standard aluminum gun bodies and air cap faces.

• PTFE hard coat body & air cap: Prevents adhesive from bonding to surfaces, dramatically reducing cleaning time and extending component life.
• All stainless steel fluid passages: Full chemical resistance across solvent-based, waterborne, and aggressive adhesive formulations.
• Heavy duty needle spring: Maintains consistent trigger response and needle return under continuous production use.
• Forged aluminum body: Lightweight and durable — built for all-day production use without fatigue.
• 17 air cap options: From 0.6mm siphon to 2.8mm pressure — one platform covers the full range of coating viscosities.

Outfits & Configurations

Available Outfits

Need Help Selecting the Right Configuration?

Contact CET’s technical support team with your material type, viscosity, and feed preference. Based on over 20 years of industrial finishing equipment experience, we’ll confirm the correct Panther 100G nozzle and air cap combination and verify same-day availability. Call or text 586-210-0555.