C.A. Technologies Panther 100G — P100G-15-2266T (1.5mm Nozzle, 2266T Air Cap)

The C.A. Technologies Panther 100G P100G-15-2266T is a 1.5mm PTFE coated conventional siphon feed spray gun paired with the 21-2266T air cap — a clean, versatile siphon setup for medium-to-heavy coatings and light adhesive applications where no pressure supply is needed.

✓ 1.5mm stainless orifice  •  ✓ PTFE coated body & air cap  •  ✓ Siphon feed — no pressure supply needed  •  ✓ 12 SCFM @ 50 PSI  •  ✓ 10" max fan  •  ✓ US Made — CET Verified

Overview

At a Glance

Specifications

Tech Specs

Application

CET Application Match — Best for This Setup

The CET Preferred Setup for siphon-fed 1.5mm work where PTFE cleanup matters and no pressure supply is available or preferred. Based on over 20 years supplying industrial finishing equipment, CET’s technical team recommends this configuration for woodworking and furniture shops, automotive refinishing operations, and industrial finishing lines that do varied coating and light adhesive work without a fixed pressure supply.

Common Questions

Frequently Asked Questions

How does the P100G-15-2266T compare to the P100G-15-2266-3T and P100G-15-2263?

All three use the 1.5mm fluid nozzle (31-0615). The 21-2266T is a siphon cap at 12 SCFM and 10" fan — no pressure supply needed. The 21-2266-3T is a pressure cap at 16.2 SCFM and 15" fan with PTFE coating — wider coverage for production runs. The 21-2263 is a pressure cap at 14 SCFM and 14" fan, C.A. Technologies recommended for adhesives at 1.5mm. Choose the 2266T when you want siphon convenience with PTFE cleanup at 1.5mm.

Is siphon feed suitable for medium-to-heavy coatings at 1.5mm?

Yes — at 12 SCFM the 21-2266T provides sufficient air volume to atomize medium-to-heavy materials through the 1.5mm orifice from a siphon cup. For very heavy body coatings or continuous production volumes, a pressure feed configuration gives more consistent flow. CET can confirm which is right — call or text 586-210-0555.

What materials work best with a 1.5mm fluid nozzle?

The 1.5mm orifice handles medium-to-heavy viscosity coatings in the 21–30 sec. Zahn #2 range — lacquers, enamels, automotive base coats, urethanes, epoxies, and light adhesives. For very thin materials, step down to 1.2mm. For heavier body adhesives over 30 sec., step up to 1.8mm.

What repair kit does the Panther 100G use?

All Panther 100G configurations use repair kit 10-110, which includes all wear seals, o-rings, springs, and needle seal components for a complete rebuild. Call or text 586-210-0555 to confirm availability for same-day shipment.

What needle does the 1.5mm nozzle use?

The 1.5mm fluid nozzle (31-0615) uses the 40-1115 (115) needle assembly — shared with the 1.8mm configurations. CET stocks replacement needles for same-day shipment.

Where can I find the full Panther 100G parts manual?

The full parts manual with exploded diagram, parts list, and air cap chart is available on the Panther P100G Spare Parts page or via the download button below. CET includes documentation with every order.

All Configurations

Find the Right Panther 100G for Your Application

The Panther 100G is available in 19 configurations across siphon, pressure, and waterborne adhesive setups. All configurations are CET Verified — supported by CET’s technical team and fulfilled through C.A. Technologies’ Colorado facility. Contact CET for a CET Application Match recommendation.

PRESSURE requires pressurized fluid supply    SIPHON works with standard siphon cup    WATERBORNE anti-shear setup for waterborne adhesives

Why Buy From CET

The CET Difference

Why Choose the Panther 100G

PTFE Coated Durability for Demanding Applications

The Panther 100G is the only gun in the C.A. Technologies conventional lineup with a PTFE hard coat on both the gun body and air cap — the critical advantage when spraying adhesives and aggressive coatings that foul standard aluminum gun bodies.

• PTFE hard coat body & air cap: Prevents adhesive bonding, dramatically reducing cleaning time and extending component life.
• All stainless steel fluid passages: Full chemical resistance across solvent-based, waterborne, and aggressive adhesive formulations.
• Heavy duty needle spring: Consistent trigger response and needle return under continuous production use.
• Forged aluminum body: Lightweight and durable — built for all-day production use without fatigue.
• 17 air cap options: From 0.6mm siphon to 2.8mm pressure — one platform covers the full range of coating viscosities.

Outfits & Configurations

Available Outfits

Need Help Selecting the Right Configuration?

Contact CET’s technical support team with your material type, viscosity, and feed preference. Based on over 20 years of industrial finishing equipment experience, we’ll confirm the correct Panther 100G nozzle and air cap combination and verify same-day availability. Call or text 586-210-0555.