Description
C.A. Technologies Panther 100G — P100G-18-2266-3 (1.8mm Nozzle, 2266-3 Air Cap)
The C.A. Technologies Panther 100G P100G-18-2266-3 is a 1.8mm PTFE coated conventional pressure feed spray gun paired with the 21-2266-3 air cap — a high-flow pressure configuration delivering 16.2 SCFM and a 15" fan through the 1.8mm orifice without the PTFE coating on the air cap.
✓ 1.8mm stainless orifice • ✓ PTFE coated gun body • ✓ Pressure feed — consistent high-volume delivery • ✓ 16.2 SCFM @ 50 PSI • ✓ 15" max fan • ✓ US Made — CET Verified
Model: P100G-18-2266-3 • Nozzle: 1.8mm (.071") • Air Cap: 21-2266-3 • Feed: PRESSURE • SCFM: 16.2 @ 50 PSI
Fan Control: 60-1500 (included) • Repair Kit: 10-110 • Max Inlet Pressure: 50 PSI • CET Verified Configuration
Overview
At a Glance
Specifications
Tech Specs
| Model | P100G-18-2266-3 |
| Fluid Nozzle | 31-0618 — 1.8mm (.071") 17-4PH Stainless |
| Air Cap | 21-2266-3 — Pressure, 16.2 SCFM |
| Needle | 40-1115 (115) |
| Feed Type | PRESSURE |
| Max Inlet Pressure | 50 PSI |
| Air Consumption | 16.2 SCFM @ 50 PSI |
| Max Pattern Width | 15" |
| Air Inlet | 1/4" NPS (m) |
| Fluid Inlet | 3/8" NPS (m) |
| Body | Forged Aluminum — PTFE Hard Coat |
| Fluid Passages | All Stainless Steel |
| Fan Control | 60-1500 (included) |
| Repair Kit | 10-110 |
| Fulfillment | Most in-stock orders ship same day — stocked at C.A. Technologies’ Colorado facility. Call or text 586-210-0555 to confirm availability. |
| Origin | US Made — C.A. Technologies |
Application
CET Application Match — Best for This Setup
The CET Preferred Setup for high-flow pressure work at 1.8mm where wide fan coverage and strong SCFM are the priority and the PTFE air cap coating is not required. Based on over 20 years supplying industrial finishing equipment, CET’s technical team specifies the P100G-18-2266-3 for epoxy coating lines, industrial finishing operations running high solid enamels, and production applications where the 21-2266-3 standard aluminum cap delivers the same 16.2 SCFM and 15" fan as the 2266-3T at a lower cost.
Common Questions
Frequently Asked Questions
- What is the difference between the P100G-18-2266-3 and P100G-18-2266-3T?
- Both use the 1.8mm fluid nozzle (31-0618) at 16.2 SCFM with a 15" fan under pressure. The only difference is the air cap coating — the 21-2266-3T has a PTFE hard coat that resists adhesive buildup for faster cleanup. The 21-2266-3 is standard aluminum. If your primary application is epoxies, high solid enamels, or urethanes rather than contact cements, the 2266-3 delivers identical spray performance without the PTFE premium.
- What is the difference between the P100G-18-2266-3 and P100G-18-2263?
- Both are 1.8mm pressure setups. The 21-2266-3 runs at 16.2 SCFM with a 15" fan. The 21-2263 runs at 14 SCFM with a 14" fan and is the C.A. Technologies recommended configuration for adhesive applications at 1.8mm. For heavy industrial coatings where maximum fan width and air volume matter, the 2266-3 is the better choice. For adhesives specifically, CET recommends the 2263. Call or text 586-210-0555 to confirm.
- Is a carbide nozzle available at 1.8mm?
- Yes — the 31-0618V carbide nozzle is a drop-in replacement for the standard 1.8mm stainless nozzle and extends service life significantly when spraying abrasive or particle-laden heavy coatings. CET can advise on whether carbide is warranted for your application — call or text 586-210-0555.
- What repair kit does the Panther 100G use?
- All Panther 100G configurations use repair kit 10-110, which includes all wear seals, o-rings, springs, and needle seal components for a complete rebuild. Call or text 586-210-0555 to confirm availability for same-day shipment.
- What needle does the 1.8mm nozzle use?
- The 1.8mm fluid nozzle (31-0618) uses the 40-1115 (115) needle assembly — shared with the 1.5mm configurations. CET stocks replacement needles for same-day shipment.
- Where can I find the full Panther 100G parts manual?
- The full parts manual with exploded diagram, parts list, and air cap chart is available on the Panther P100G Spare Parts page or via the download button below. CET includes documentation with every order.
All Configurations
Find the Right Panther 100G for Your Application
The Panther 100G is available in 19 configurations across siphon, pressure, and waterborne adhesive setups. All configurations are CET Verified — supported by CET’s technical team and fulfilled through C.A. Technologies’ Colorado facility. Contact CET for a CET Application Match recommendation.
| Model | Nozzle | Air Cap | Feed | SCFM | Best For | Order |
|---|---|---|---|---|---|---|
| P100G-10-2266-3T | 1.0mm | 21-2266-3T | PRESSURE | 16.2 | Thin adhesives, sealers | Order |
| P100G-12-2266T | 1.2mm | 21-2266T | SIPHON | 12 | Medium coatings, lacquers | Order |
| P100G-12-2266-3T | 1.2mm | 21-2266-3T | PRESSURE | 16.2 | Thin-medium adhesives, lacquers | Order |
| P100G-12-2263 | 1.2mm | 21-2263 | PRESSURE | 14 | Medium adhesives, primers | Order |
| P100G-13-2266-3T | 1.3mm | 21-2266-3T | PRESSURE | 16.2 | Medium adhesives, epoxy primers | Order |
| P100G-13-2263 | 1.3mm | 21-2263 | PRESSURE | 14 | Medium adhesives, coatings | Order |
| P100G-15-2266-3T | 1.5mm | 21-2266-3T | PRESSURE | 16.2 | Adhesives, medium-heavy coatings | Order |
| P100G-15-2263 | 1.5mm | 21-2263 | PRESSURE | 14 | Adhesives, medium-heavy | Order |
| P100G-15-2266T | 1.5mm | 21-2266T | SIPHON | 12 | Medium-heavy coatings, light adhesives | Order |
| P100G-18-2266-3T | 1.8mm | 21-2266-3T | PRESSURE | 16.2 | Adhesives, heavy coatings | Order |
| P100G-18-2266-3 | 1.8mm | 21-2266-3 | PRESSURE | 16.2 | Epoxies, high solid coatings | Current |
| P100G-18-2263 | 1.8mm | 21-2263 | PRESSURE | 14 | Adhesives, heavy body | Order |
| P100G-18-2466 | 1.8mm | 21-2466 | SIPHON | 15 | Heavy coatings, primers | Order |
| P100G-18-1590 | 1.8mm | 1590 | WATERBORNE | — | Waterborne adhesives — anti-shear | Order |
| P100G-22-2167 | 2.2mm | 21-2167 | PRESSURE | 14.5 | Heavy adhesives, high solid coatings | Order |
| P100G-22-2267 | 2.2mm | 21-2267 | PRESSURE | 15 | Heavy adhesives, high solid coatings | Order |
| P100G-22-2467 | 2.2mm | 21-2467 | SIPHON | 15 | Heavy coatings, high viscosity | Order |
| P100G-28-2168 | 2.8mm | 21-2168 | PRESSURE | 14 | Ultra-heavy adhesives & coatings | Order |
| P100G-28-2268 | 2.8mm | 21-2268 | SIPHON | 15 | Ultra-heavy coatings | Order |
PRESSURE requires pressurized fluid supply SIPHON works with standard siphon cup WATERBORNE anti-shear setup for waterborne adhesives
Why Buy From CET
The CET Difference
- Over 20 years supplying industrial finishing equipment — CET has been matching customers to the right C.A. Technologies configuration since the beginning. We know these guns inside and out.
- Real technical support before and after the sale — call or text 586-210-0555 to reach CET’s technical team directly. We’ll confirm your nozzle, air cap, and setup before you order so you get it right the first time.
- Fast fulfillment on most in-stock orders — C.A. Technologies stocks these guns at their Colorado facility and most orders ship same day. Call or text 586-210-0555 to verify availability and confirm your ship date before ordering.
- Verified part compatibility — every configuration on this page is CET Verified. We stock the gun, the repair kit, the air caps, and the spare parts — so you’re never waiting on back-ordered components.
- Documentation included — every order ships with access to the full parts manual, air cap chart, and nozzle selection guide. No hunting for documentation after the sale.
- The best order fulfillment in the industry — you receive updates at every step of the process so you know exactly where your order is at all times. And in the rare case there’s a delay, we’ll let you know in advance — so you’re never chasing an order down again.
Why Choose the Panther 100G
PTFE Coated Durability for Demanding Applications
The Panther 100G is the only gun in the C.A. Technologies conventional lineup with a PTFE hard coat on both the gun body and air cap — the critical advantage when spraying adhesives and aggressive coatings that foul standard aluminum gun bodies.
- PTFE hard coat body & air cap: Prevents adhesive bonding, dramatically reducing cleaning time and extending component life.
- All stainless steel fluid passages: Full chemical resistance across solvent-based, waterborne, and aggressive adhesive formulations.
- Heavy duty needle spring: Consistent trigger response and needle return under continuous production use.
- Forged aluminum body: Lightweight and durable — built for all-day production use without fatigue.
- 17 air cap options: From 0.6mm siphon to 2.8mm pressure — one platform covers the full range of coating viscosities.
Outfits & Configurations
Available Outfits
| Part Number | Type | Description |
|---|---|---|
| OP100G-130 | 2 Quart Outfit (Economy) | Includes 5' hose assemblies |
| OP100G-600 | 2 Quart Outfit (Bandit) | Includes 5' hose assemblies |
| Tank Outfits | 2.5, 5, 10, 12.5, 15 Gallon | Includes 25' hose assemblies — recommended for continuous production runs |
Panther 100G Product Manual
Full parts diagram, air cap chart, nozzle selection guide & replacement part numbers for all P100G configurations
Download the Panther 100G ManualNeed Help Selecting the Right Configuration?
Contact CET’s technical support team with your material type, viscosity, and feed preference. Based on over 20 years of industrial finishing equipment experience, we’ll confirm the correct Panther 100G nozzle and air cap combination and verify same-day availability. Call or text 586-210-0555.
