Description
C.A. Technologies Panther 100G — P100G-18-2266-3T (1.8mm Nozzle, 2266-3T Air Cap)
The C.A. Technologies Panther 100G P100G-18-2266-3T is a 1.8mm PTFE coated conventional pressure feed spray gun paired with the 21-2266-3T air cap — the highest SCFM, widest fan pressure configuration in the P100G lineup at 1.8mm, with a PTFE coated air cap for non-stick adhesive cleanup. At 16.2 SCFM and a 15" maximum fan under pressure, this setup delivers strong atomization of heavy adhesives, contact cements, and high solid industrial coatings with the PTFE non-stick advantage built into both the gun body and the air cap. Used daily in furniture manufacturing, cabinet shops, and industrial laminating operations where the combination of high-volume pressure delivery and fast adhesive cleanup matters most. The PTFE hard coat resists material buildup on both surfaces, all stainless steel fluid passages provide full chemical resistance, and the gun is US made by C.A. Technologies in Louisville, CO. Call or text 586-210-0555 for setup guidance and availability before you order.
✓ 1.8mm stainless orifice • ✓ PTFE coated body & air cap • ✓ Pressure feed — consistent high-volume delivery • ✓ 16.2 SCFM @ 50 PSI — requires 80-gallon compressor minimum • ✓ 15" max fan • ✓ US Made — CET Verified
Model: P100G-18-2266-3T • Nozzle: 1.8mm (.071") • Air Cap: 21-2266-3T • Feed: PRESSURE • SCFM: 16.2 @ 50 PSI
Fan Control: 60-1500 (included) • Repair Kit: 10-110 • Max Inlet Pressure: 50 PSI • CET Verified Configuration
Overview
At a Glance
Specifications
Tech Specs
| Model | P100G-18-2266-3T |
| Fluid Nozzle | 31-0618 — 1.8mm (.071") 17-4PH Stainless |
| Air Cap | 21-2266-3T — Pressure, PTFE coated, 16.2 SCFM |
| Needle | 40-1115 (115) — shared with 1.5mm configurations |
| Feed Type | PRESSURE — requires pressurized fluid supply (pot, pump, or pressure cup) |
| Max Inlet Pressure | 50 PSI |
| Air Consumption | 16.2 SCFM @ 50 PSI — requires minimum 80-gallon compressor at 125 PSI rated output |
| Max Pattern Width | 15" — widest fan available in the P100G pressure lineup at 1.8mm |
| Air Inlet | 1/4" NPS (m) — standard shop air fitting, most compressors connect directly |
| Fluid Inlet | 3/8" NPS (m) — connects to standard pressure pot or pump hose assemblies |
| Body | Forged Aluminum — PTFE Hard Coat — prevents adhesive bonding to gun body, dramatically faster cleanup |
| Fluid Passages | All Stainless Steel — full chemical resistance to solvent-based adhesives, contact cements, and industrial coatings |
| Fan Control | 60-1500 (included) — adjusts from full 15" fan down for targeted application |
| Repair Kit | 10-110 — complete rebuild kit, all seals, o-rings, springs and needle seal |
| Fulfillment | Most in-stock orders ship same day — stocked at C.A. Technologies’ Colorado facility. Call or text 586-210-0555 to confirm availability. |
| Origin | US Made — C.A. Technologies (Louisville, CO) |
Application
CET Application Match — Best for This Setup
The CET Preferred Setup for high-volume pressure adhesive application at 1.8mm where PTFE non-stick on both the gun and air cap is the priority. Based on over 20 years supplying industrial finishing equipment, CET’s technical team specifies the P100G-18-2266-3T for furniture manufacturing, cabinet shops, and industrial laminating operations running heavy contact cements and adhesives where wide fan coverage, maximum pressure SCFM at 1.8mm, and the fastest possible cleanup after adhesive runs all matter in the same production shift.
Common Questions
Frequently Asked Questions
- What is the difference between the P100G-18-2266-3T and P100G-18-2266-3?
- Both use the 1.8mm fluid nozzle at 16.2 SCFM with a 15" fan under pressure — the only difference is the PTFE coating on the air cap. The 21-2266-3T has a PTFE hard coat that prevents adhesive from bonding to the cap face, making cleanup significantly faster. The 21-2266-3 is standard aluminum. For adhesive-heavy operations, CET recommends the 2266-3T. For epoxies and industrial coatings where the cap doesn’t foul as aggressively, the 2266-3 delivers identical spray performance.
- What is the difference between the P100G-18-2266-3T and P100G-18-2263?
- Both are 1.8mm pressure setups. The 21-2266-3T runs at 16.2 SCFM with a 15" fan and PTFE coated cap. The 21-2263 runs at 14 SCFM with a 14" fan — C.A. Technologies’ specifically recommended configuration for adhesive applications at 1.8mm. For high-volume production runs where wide coverage and PTFE cleanup matter, choose the 2266-3T. For controlled adhesive application where lower SCFM is preferred, the 2263 is the CET recommendation.
- What compressor do I need for 16.2 SCFM?
- 16.2 SCFM at 50 PSI operating pressure requires a minimum 80-gallon compressor rated at 125 PSI output. Undersized compressors will pressure-drop under sustained spraying, causing inconsistent atomization and fan pattern. If your compressor is borderline, CET’s technical team can advise — call or text 586-210-0555.
- Is a carbide nozzle available at 1.8mm?
- Yes — the 31-0618V carbide nozzle is a drop-in replacement for the 31-0618 stainless nozzle and significantly extends service life when spraying abrasive or particle-laden materials. Call or text 586-210-0555 to confirm if carbide is warranted for your application.
- What repair kit does the Panther 100G use?
- All Panther 100G configurations use repair kit 10-110, which includes all wear seals, o-rings, springs, and needle seal components for a complete rebuild. Call or text 586-210-0555 to confirm availability for same-day shipment.
- Where can I find the full Panther 100G parts manual?
- The full parts manual with exploded diagram, parts list, and air cap chart is available on the Panther P100G Spare Parts page or via the download button below. CET includes documentation with every order.
All Configurations
Find the Right Panther 100G for Your Application
The Panther 100G is available in 19 configurations across siphon, pressure, and waterborne adhesive setups. All configurations are CET Verified — supported by CET’s technical team and fulfilled through C.A. Technologies’ Colorado facility. Contact CET for a CET Application Match recommendation.
| Model | Nozzle | Air Cap | Feed | SCFM | Best For | Order |
|---|---|---|---|---|---|---|
| P100G-10-2266-3T | 1.0mm | 21-2266-3T | PRESSURE | 16.2 | Thin adhesives, sealers | Order |
| P100G-12-2266T | 1.2mm | 21-2266T | SIPHON | 12 | Medium coatings, lacquers | Order |
| P100G-12-2266-3T | 1.2mm | 21-2266-3T | PRESSURE | 16.2 | Thin-medium adhesives, lacquers | Order |
| P100G-12-2263 | 1.2mm | 21-2263 | PRESSURE | 14 | Medium adhesives, primers | Order |
| P100G-13-2266-3T | 1.3mm | 21-2266-3T | PRESSURE | 16.2 | Medium adhesives, epoxy primers | Order |
| P100G-13-2263 | 1.3mm | 21-2263 | PRESSURE | 14 | Medium adhesives, coatings | Order |
| P100G-15-2266-3T | 1.5mm | 21-2266-3T | PRESSURE | 16.2 | Adhesives, medium-heavy coatings | Order |
| P100G-15-2263 | 1.5mm | 21-2263 | PRESSURE | 14 | Adhesives, medium-heavy | Order |
| P100G-15-2266T | 1.5mm | 21-2266T | SIPHON | 12 | Medium-heavy coatings, light adhesives | Order |
| P100G-18-2266-3T | 1.8mm | 21-2266-3T | PRESSURE | 16.2 | Adhesives, heavy coatings | Current |
| P100G-18-2266-3 | 1.8mm | 21-2266-3 | PRESSURE | 16.2 | Epoxies, high solid coatings | Order |
| P100G-18-2263 | 1.8mm | 21-2263 | PRESSURE | 14 | Adhesives, heavy body | Order |
| P100G-18-2466 | 1.8mm | 21-2466 | SIPHON | 15 | Heavy coatings, primers | Order |
| P100G-18-1590 | 1.8mm | 1590 | WATERBORNE | — | Waterborne adhesives — anti-shear | Order |
| P100G-22-2167 | 2.2mm | 21-2167 | PRESSURE | 14.5 | Heavy adhesives, high solid coatings | Order |
| P100G-22-2267 | 2.2mm | 21-2267 | PRESSURE | 15 | Heavy adhesives, high solid coatings | Order |
| P100G-22-2467 | 2.2mm | 21-2467 | SIPHON | 15 | Heavy coatings, high viscosity | Order |
| P100G-28-2168 | 2.8mm | 21-2168 | PRESSURE | 14 | Ultra-heavy adhesives & coatings | Order |
| P100G-28-2268 | 2.8mm | 21-2268 | SIPHON | 15 | Ultra-heavy coatings | Order |
PRESSURE requires pressurized fluid supply SIPHON works with standard siphon cup WATERBORNE anti-shear internal mix, waterborne adhesives only
Why Buy From CET
The CET Difference
- Over 20 years supplying industrial finishing equipment — CET has been matching customers to the right C.A. Technologies configuration since the beginning. We know these guns inside and out.
- Real technical support before and after the sale — call or text 586-210-0555 to reach CET’s technical team directly. We’ll confirm your nozzle, air cap, and setup before you order so you get it right the first time.
- Fast fulfillment on most in-stock orders — C.A. Technologies stocks these guns at their Colorado facility and most orders ship same day. Call or text 586-210-0555 to verify availability and confirm your ship date before ordering.
- Verified part compatibility — every configuration on this page is CET Verified. We stock the gun, the repair kit, the air caps, and the spare parts — so you’re never waiting on back-ordered components.
- Documentation included — every order ships with access to the full parts manual, air cap chart, and nozzle selection guide. No hunting for documentation after the sale.
- The best order fulfillment in the industry — you receive updates at every step of the process so you know exactly where your order is at all times. And in the rare case there’s a delay, we’ll let you know in advance — so you’re never chasing an order down again.
Why Choose the Panther 100G
Built for Adhesives That Standard Guns Can’t Handle
The Panther 100G is the only gun in the C.A. Technologies conventional lineup with a PTFE hard coat on both the gun body and air cap — the critical advantage when spraying adhesives and aggressive coatings that foul standard aluminum gun bodies and air cap faces during production.
- PTFE hard coat body & air cap: Prevents adhesive from bonding to both surfaces — wipe clean instead of soak and scrub, dramatically cutting between-run cleanup time.
- All stainless steel fluid passages: Full chemical resistance to solvent-based adhesives, contact cements, and industrial coatings for long production life.
- Heavy duty needle spring: Consistent trigger response and reliable needle return under continuous all-day production use.
- Forged aluminum body: Lightweight for reduced operator fatigue on long shifts — durable enough for demanding industrial environments.
- 19 configurations: From 1.0mm thin adhesive sealers to 2.8mm ultra-heavy pressure setups and the only waterborne anti-shear configuration in the lineup.
Outfits & Configurations
Available Outfits
| Part Number | Type | Description |
|---|---|---|
| OP100G-130 | 2 Quart Outfit (Economy) | Includes 5' hose assemblies |
| OP100G-600 | 2 Quart Outfit (Bandit) | Includes 5' hose assemblies |
| Tank Outfits | 2.5, 5, 10, 12.5, 15 Gallon | Includes 25' hose assemblies — recommended for continuous production adhesive runs with this configuration |
Panther 100G Product Manual
Full parts diagram, air cap chart, nozzle selection guide & replacement part numbers for all P100G configurations
Download the Panther 100G ManualNeed Help Selecting the Right Configuration?
Contact CET’s technical support team with your material type, viscosity, and feed preference. Based on over 20 years of industrial finishing equipment experience, we’ll confirm the correct Panther 100G nozzle and air cap combination and verify same-day availability. Call or text 586-210-0555.
