C.A. Technologies Panther 100G — P100G-22-2467 (2.2mm Nozzle, 2467 Air Cap)

The C.A. Technologies Panther 100G P100G-22-2467 is a 2.2mm PTFE coated conventional siphon feed spray gun paired with the 21-2467 air cap — a high-flow siphon configuration built for heavy body coatings and high viscosity materials that exceed the range of standard 1.8mm setups. At 15 SCFM and a 2.2mm orifice, this setup handles ultra-thick adhesives, heavy industrial primers, and high solid coatings from a siphon cup without requiring a pressure supply. Used in furniture manufacturing, industrial production, and specialty coating operations where large orifice siphon spraying is preferred for batch work or portability. The PTFE hard coat on both the gun body and air cap resists material buildup and simplifies cleanup. All stainless steel fluid passages. US made. Call or text 586-210-0555 for setup guidance and availability before you order.

Overview

At a Glance

• Configuration: 2.2mm stainless steel fluid nozzle + 21-2467 siphon air cap — CET Verified Configuration
• Best for: Heavy body adhesives, high viscosity industrial coatings, thick primers and high solid materials over 30 sec. Zahn #2
• Feed type: Siphon feed — no pressure supply required, practical for batch and bench work
• Air consumption: 15 SCFM @ 50 PSI max inlet
• Body: PTFE hard coat anodized forged aluminum — resists adhesive and coating buildup for fast cleanup
• Fluid passages: All stainless steel for full chemical resistance
• Fast fulfillment — most in-stock orders ship same day. Call or text 586-210-0555 to verify availability before you order.
• Origin: US Made by C.A. Technologies (Louisville, CO) — distributed by CET for over 20 years

Specifications

Tech Specs

Application

CET Application Match — Best for This Setup

The P100G-22-2467 is the CET Preferred Setup for operations that need large-orifice siphon spraying of heavy body materials without committing to a pressure tank or pump. Based on over 20 years supplying industrial finishing equipment, CET’s technical team recommends this configuration for shops running heavy adhesives and thick coatings in batches — where the flexibility of a siphon cup is more practical than a pressure feed line, but material viscosity demands more than a 1.8mm orifice can reliably deliver.

At 2.2mm and 15 SCFM, the P100G-22-2467 sits between the standard 1.8mm pressure setups and the 2.8mm extreme-flow configurations. It handles materials in the heavy-to-ultra-heavy range — high solid adhesives, thick industrial enamels, and viscous laminating materials — while keeping the setup simple and portable.

• Batch adhesive application: 2.2mm siphon setup is ideal for shops applying heavy adhesives in batches where portability and quick cup changes matter
• High viscosity industrial coatings: Handles thick materials over 30 sec. Zahn #2 that would restrict flow through a 1.8mm orifice
• Furniture and millwork production: Used by shops spraying heavy contact cements and laminating adhesives on case goods and panel production
• Portable field setups: No pressure supply required — siphon cup and air line is all that’s needed for off-line or remote application

Common Questions

Frequently Asked Questions

When should I choose the 2.2mm orifice over 1.8mm?

Step up to 2.2mm when your material is consistently over 30 seconds Zahn #2 and you’re seeing restricted flow, spitting, or poor atomization through a 1.8mm setup. The 2.2mm orifice passes more material per trigger pull and handles higher viscosity adhesives and coatings without the flow restrictions a smaller orifice can cause. Not sure which is right for your material? Call or text CET at 586-210-0555 — we’ll help confirm before you order.

What is the difference between the P100G-22-2467 and P100G-22-2167?

Both use a 2.2mm fluid nozzle at 15 SCFM but differ in feed type. The P100G-22-2467 uses the 21-2467 siphon air cap — no pressure supply needed. The P100G-22-2167 uses the 21-2167 pressure air cap at 14.5 SCFM and requires a pressurized fluid supply. CET recommends the pressure configuration for continuous production adhesive runs; the siphon setup suits batch work and portable applications.

Can I use this gun for both adhesives and finish coatings?

Yes — the 2.2mm orifice and PTFE coated body make this setup versatile across heavy adhesives and thick finish coatings. The PTFE coating simplifies cleanup when switching between materials. For lighter finish coatings in the medium viscosity range, a smaller orifice configuration may give better atomization and pattern control.

What repair kit does the Panther 100G use?

All Panther 100G configurations use repair kit 10-110, which includes all wear seals, o-rings, springs, and needle seal components for a complete rebuild. Call or text 586-210-0555 to confirm availability for same-day shipment.

Is a carbide nozzle available at 2.2mm for abrasive materials?

Yes — the 31-0622V carbide nozzle is a drop-in replacement for the standard 2.2mm stainless nozzle and extends service life significantly when spraying abrasive or particle-laden coatings. CET’s team can advise on whether carbide is warranted for your application.

Where can I find the full Panther 100G parts manual?

The full parts manual with exploded diagram, parts list, and air cap chart is available on the Panther P100G Spare Parts page or via the download button below. CET includes documentation with every order.

All Configurations

Find the Right Panther 100G for Your Application

The Panther 100G is available in 19 configurations across siphon, pressure, and waterborne adhesive setups. All configurations are CET Verified — supported by CET’s technical team and fulfilled through C.A. Technologies’ Colorado facility. Use the table below to find the right nozzle and air cap combination for your material, or contact CET for a CET Application Match recommendation.

Why Buy From CET

The CET Difference

Why Choose the Panther 100G

PTFE Coated Durability for Demanding Applications

The Panther 100G is the only gun in the C.A. Technologies conventional lineup with a PTFE hard coat on both the gun body and air cap. This matters most when spraying adhesives, contact cements, and other sticky or aggressive coatings that tend to foul standard aluminum gun bodies and air cap faces.

• PTFE hard coat body & air cap: Prevents adhesive from bonding to surfaces, dramatically reducing cleaning time and extending component life.
• All stainless steel fluid passages: Full chemical resistance across solvent-based, waterborne, and aggressive adhesive formulations.
• Heavy duty needle spring: Maintains consistent trigger response and needle return under continuous production use.
• Forged aluminum body: Lightweight and durable — built for all-day production use without fatigue.
• 17 air cap options: From 0.6mm siphon to 2.8mm pressure — one platform covers the full range of coating viscosities.

Outfits & Configurations

Available Outfits

Need Help Selecting the Right Configuration?

Contact CET’s technical support team with your material type, viscosity, and feed preference. Based on over 20 years of industrial finishing equipment experience, we’ll confirm the correct Panther 100G nozzle and air cap combination and verify same-day availability. Call or text 586-210-0555.