Description
Sagola Mini Xtreme Pressure, Mini EPA Aircap 1.20mm
1.20 mm · Mini EPA
Mini EPA — 1.20 mm
Small gun, industrial reach
A pressure-feed mini gun for detail, touch-up and small-part work across automotive, wood and plastics.
Pressure feed, straight to the tip
Compressed air connects at the inlet under the grip. The product is held in a pressure pot or fed by a pump and travels through a hose to the fluid tip, where it is mixed with spraying air controlled from outside the air nozzle — so the gun stays light in the hand however much material you are moving.
Small, light and agile
347 g and 158 x 18 x 165 mm overall — the reduced dimensions make it comfortable over long periods and easy to work into complex or hard-to-reach surfaces.
Interchangeable air caps and nozzles
Mini Aqua, Mini HVLP, Mini EPA and Mini TECH caps share the same gun body, so one gun covers a wide range of coatings — pick the cap for the material, then the nozzle for its viscosity.
ATEX rated for classified areas
Rated II 2G T4 x under Directive 2014/34/UE as non-electric equipment. In explosion-hazard areas the gun must have earthing connections and/or static-free feed hoses.
Ultra Soft Flow valve available
An optional servo-piloted air valve, exclusive to Sagola and offered on the pressure version, cuts the trigger-pull force by more than half to reduce operator fatigue.
Every cap in the Mini Xtreme range
The same gun body takes all four caps; figures are the factory manual’s.
Technical data
| Weight | 347 g (0.76 lb) |
|---|---|
| Dimensions | 158 x 18 x 165 mm (6.22 x 0.71 x 6.5") |
| Air inlet | BSP 1/4" M |
| Product inlet | BSP 3/8" M |
| Maximum air pressure | 4 bar (58 psi) |
| Recommended air pressure | 1.4 - 2.2 bar (20.3 - 31.9 psi) |
| Recommended air pressure, HVLP | 1.8 bar (26 psi) |
| Temperature range | 0 - 60 °C (32 - 122 °F) |
| Materials in contact with product | Anodized aluminium, stainless steel, PTFE, POM and polyamide |
| Application distance, EPA cap | 15 - 20 cm (5.9 - 7.9") |
| Application distance, HVLP cap | 12 - 15 cm (4.7 - 6") |
| ATEX | II 2G T4 x — Directive 2014/34/UE (non-electric) |
Parts diagram, manuals & spares
Exploded parts breakdown for the Mini Xtreme Pressure, downloadable manuals & brochures, and every needle, nozzle and air cap available as a spare.
