3M Fastbond 30NF Contact Adhesive

3M™ Fastbond™ Contact Adhesive 30NF – Spray Gun Setup & Application Recommendations

3M™ Fastbond™ Contact Adhesive 30NF is a high-strength, water-dispersed contact adhesive designed for bonding a wide variety of materials including decorative laminates, particleboard, plywood, and many plastics. This product is well-known for its green color when wet (clear when dry), quick bond strength build-up, and low VOC formulation, making it a great choice for both industrial and commercial laminating applications.

Spray Gun Setup Recommendations

Handheld Spray Applications:

• Binks 2001SS, 95

  • Air Cap: 66SD

  • Fluid Tip: 65SS

  • Air Pressure: 10 – 15 psi

  • Air Requirement: 6 scfm @ 20 psi

  • Fluid Flow: 9 – 12 fl. oz/min

• DeVilbiss MSA-510

  • Air Cap: #30

  • Fluid Tip: FF

  • Air Pressure: 10 – 15 psi

  • Air Requirement: 6 scfm @ 20 psi

  • Fluid Flow: 9 – 12 fl. oz/min

HVLP (High Volume Low Pressure):

• Binks Mach 1

  • Air Cap: 95P

  • Fluid Tip: 94F

  • Air Pressure: 30 psi

  • Air Requirement: 11 scfm @ 30 psi

  • Fluid Flow: 9 – 12 fl. oz/min

Automatic Spray Applications:

• Binks No. 95A

  • Air Cap: 66SD

  • Fluid Tip: 65SS

  • Air Pressure: 10 – 15 psi

  • Air Requirement: 6 scfm @ 20 psi

  • Fluid Flow: 9 – 12 fl. oz/min

• HVLP Mach 1A

  • Air Cap: 95P

  • Fluid Tip: 94F

  • Air Pressure: 30 psi

  • Air Requirement: 11 scfm @ 30 psi

  • Fluid Flow: 9 – 12 fl. oz/min

Material Properties at a Glance

• Color: Green (wet), Clear (dry)

• Solids Content: 47–51%

• Viscosity: 200–750 cP @ 27°C

• Base: Polychloroprene

• Coverage: 680 ft²/gal @ 3 g/ft² dry

• Solvent Resistance: Water-based; contains <2% methanol and <3% toluene