Binks Fluid Handling
Find Your Perfect Binks Pressure Tank
ASME-code galvanized & stainless steel pressure tanks from 2 to 60 gallons — matched to your coating, your volume, and your spray setup in four easy steps.
ASME
Every Binks pressure tank is built to ASME code — the standard that OSHA, fire marshals, and insurance underwriters expect under NFPA guidelines. Don't get caught spraying from a non-code vessel.
Build Your Spec in 4 Steps
183G Galvanized
The workhorse for solvent-borne coatings. Galvanized carbon steel with fill port, location lug, and large carry handles. Rated to 110 psi.
183S Stainless Steel
Best chemical resistance in the line — the right choice for waterborne coatings and easy cleanup. Same 110 psi rating, same fill port and handles.
Single Regulated
One regulator controls fluid pressure (0–100 psi). Simple and effective when your atomizing air is regulated elsewhere.
Double Regulated
Fluid + atomizing air control at the tank — no pressure blast when you first pull the trigger. Extra-sensitive low-pressure regulators available for fine finishing.
Direct Drive
For low-viscosity materials or small volumes. Keeps well-behaved coatings dispersed without over-working them. (Coatings that stay dispersed may need no agitation at all.)
15:1 Gear Reduced
Higher viscosity, larger volumes, or air-entrapment risk — the slow, high-torque stir that keeps heavy coatings uniform without whipping air into them.
Top Outlet
The standard configuration — fluid draws up through a tube from the tank. Right for most coatings and easiest to clean.
Bottom Outlet Kit
Gravity-assisted feed for high-viscosity or high-cost materials — drain nearly every drop. Kits include sturdy steel legs, fittings, and outlet pipe.
Pick Your Size
Rule of thumb: match the tank to the gallons you spray per 8-hour shift. Every size rated to full working pressure.
| Tank Size |
Holds |
Best For |
|
| 2 Gallon ASME |
1-gallon pail |
Touch-ups, samples & short runs — up to 5 gallons per shift. Also available in the budget-friendly PT series. |
Shop 2 Gal |
| 5 Gallon ASME |
5-gallon pail |
The most popular single-gun setup — drop a 5-gallon pail straight in, spray up to 5–10 gallons per shift. |
Shop 5 Gal |
| 10 Gallon ASME |
5-gallon pail |
Longer runs with fewer refills — up to 10 gallons per shift without breaking stride. |
Shop 10 Gal |
| 15 Gallon ASME |
5-gallon pail |
All-day production spraying — up to 15 gallons per shift from one fill. |
Shop 15 Gal |
| 30 Gallon ASME |
Bulk fill |
Big jobs — line striping, multiple guns, up to 30 gallons per shift. Stainless-fitted liners available for waterborne. |
Shop 30 Gal |
| 60 Gallon ASME |
Bulk fill |
Maximum capacity for multi-gun crews and the longest production runs — 60+ gallons per shift. |
Shop 60 Gal |
Not Sure Which Tank Fits Your Job?
CET is your authorized Binks distributor — we'll size, regulate, and agitate it right the first time. Call, text, or shop online.
