Binks 183G-241 2-Gallon ASME Pressure Tank

The Binks 183G-241 is a 2-gallon ASME pressure feed tank designed for supplying material at a constant preset pressure up to a maximum of 110 psi. This model is constructed from galvanized steel for most solvent-borne applications. It features extra sensitive regulation with gun regulation for extremely accurate, low-pressure fluid control plus precision control of the spray gun's atomizing air. Additionally, it includes direct drive agitation for efficient mixing of low to medium viscosity materials. The tank is built to ASME specifications.

Why choose the Binks 183G-241 Pressure Tank?

The Binks 183G-241 is an excellent choice for applications requiring highly precise fluid delivery and atomization, especially when working with solvent-borne materials and when agitation is needed for low to medium viscosity materials. Its galvanized construction makes it suitable for most solvent-borne applications. The extra sensitive regulation with gun regulation offers extremely accurate, low-pressure fluid pressure control plus precision control of spray gun atomizing air, allowing for a very fine application of coatings. The direct drive agitation efficiently mixes materials that require regular stirring or have solids that tend to settle.

Specific Use Cases:

• Solvent-Borne Materials: Primarily suited for most solvent-borne applications due to its galvanized construction.
• Low to Medium Viscosity Materials: Direct drive agitation efficiently mixes materials that require regular stirring or have solids that tend to settle.
• Applications Requiring Precise Low Fluid Pressure Control with Gun Regulation: Ideal for extremely accurate, low-pressure fluid control plus precision control of spray gun atomizing air.
• Industrial Production: Provides a constant, precisely regulated material supply for consistent application in high-end finishing operations.

Key Features and Specifications:

• Tank Model: 183G-241.
• Capacity: 2 gallons (Capacity up to 2.8 gallons internal volume).
• Maximum Working Pressure: 110 psi.
• Tank Shell Material: SA-414 Steel, Galvanized (Zinc).
• Tank Lid Material: SA-414 Steel, Galvanized (Zinc).
• Regulation Type: Extra Sensitive regulation with gun regulation.
• Agitation Type: Direct Drive agitation.
• Fluid Tube: 3/8 in. Steel Pipe, Galvanized.
• Fluid Outlet (Elbow): Steel, Zinc Plate.
• Fluid Valve, Outlet: Brass, Nickel Plate 3/8-18 NPS(M).
• Agitator Paddle/Propeller: Nylon, Glass Filled.
• Agitator Shaft: Steel, Zinc Plate.
• Agitator Shaft Seal: Engineered PTFE, Stainless Steel.
• Air Manifold: Steel, Zinc Plate.
• Plug (Air Manifold Coupling): Steel, Zinc Plate.
• Includes Fill Port: All 183G tanks include a fill port.
• Lid Orientation: Features a location lug to ensure proper lid orientation.
• Portability: Equipped with larger handles for increased portability.
• Approx. Shipping Weight: 59 lbs (for tanks with agitators).

Accessories & Options (Sold Separately):

• Bottom Outlet Kit (183-3000): Allows conversion from standard top outlet to bottom outlet. All bottom outlet wetted parts are stainless steel. Includes three 183-3005 Leg Kits.
• Fluid Strainer (VS-534): Primary fluid strainer that attaches between the fluid outlet valve and fluid hose to strain material. Components are made of stainless steel with a nylon filter. Comes standard with 100-mesh screen.
• Bent Fluid Tube (QMG-35): Galvanized bent fluid tube can be used if air bubbles form in material, taking the intake farther away from the agitator.
• Shorter Profile Agitator Paddle (QMS-79): If air bubbles form in material, a shorter paddle can be used.
• Clean Air Control Units (HFRL-508, HFRL-509): Designed to remove dirt, pipe scale, and most liquid aerosol. Includes an automatic drain which expels liquids that accumulate in the filter bowl.
• Disposable Tank Liners (PT-78-K10/K60): Molded polyethylene tank liners reduce solvent waste and tank cleanup time. The liner is made of tough, durable, leakproof polyethylene and can be used with all compatible materials.
• Prospector™ Pressure Tank Strainers (PTS-2Gal-K20-200/400/600): Economical way to remove foreign material from paint, stain, lacquer, and coatings.

Binks pressure feed tanks are covered by Carlisle Fluid Technologies' one-year materials and workmanship limited warranty. The use of any parts or accessories from a source other than Carlisle Fluid Technologies will void all warranties. For specific warranty information, contact the closest Carlisle Fluid Technologies location. When you purchase this Binks 183G-241 pressure tank from an authorized distributor, you benefit from robust construction and versatile features for your coating applications.

Binks 2 Gallon Pressure Tank, Galvanized, 2 High Precision Regulators

The Binks 183G-241 pressure pot is 2 gallons & features a galvanized construction. This is appropriate for solvent based materials and is ASME rated. Disposable liners are available for easy cleaning.

The following setups are available for Binks 2 gallon pressure tanks:

183G-200 – No regulator, no agitation
183G-210 – Single regulator, no agitation 
183G-211 – Single regulator, direct drive agitator 
183G-213 – Single regulator, gear reduced agitator
183G-220 - Dual regulator, no agitation
183G-221 - Dual regulator, direct drive agitator
183G-223 - Dual regulator, gear reduced agitator 
183G-230 - Single regulator (high precision), no agitation
183G-231 - Single regulator (high precision), direct drive agitator
183G-233 - Single regulator (high precision), gear reduced agitator
183G-240 - Dual regulator (high precision), no agitation 
183G-241 - Dual regulator (high precision), direct drive agitator (current unit)
183G-243 - Dual regulator (high precision), gear reduced agitator

• Binks A.S.M.E. code tanks meet OSHA regulations when using flammable and combustible materials 
• Constructed from heavy gauge steel with forged steel clamps
• Higher pressure rating for heavier materials
• Range offers complete material handling suitability for solvent and waterborne coatings
• Inner liners reduce cleaning time and save coating material

Binks pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure.

The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure), safety pressure relief valves and manual, rotary or oscillating agitation types are available to provide the best quality agitation.

Binks Pressure Feed Containers are constructed from the highest-grade materials and fully comply with global pressure regulations including PED, ATEX and ASME.

Galvanized Pressure Tanks

Galvanized steel tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. The bottom outlet is recommended for heavy, viscous materials such as emulsified asphalts, cutback asphalts, rubber compounds, etc.

Stainless Steel Pressure Tanks

Stainless Steel Pressure Tanks are suitable for virtually all fluids and solvents. They are ASME certified and permanently labeled for 110 PSIG maximum working pressure. Tanks and lids are constructed of heavy gauge 304 stainless steel and are also electro polished. All models are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts.