Binks 183S-210 2-Gallon ASME Pressure Tank

The Binks 183S-210 is a 2-gallon ASME pressure feed tank designed for supplying material at a constant preset pressure up to a maximum of 110 psi. This model is constructed from 304 stainless steel for superior chemical resistance, making it suitable for waterborne materials. It features single regulation for controlling air to the tank only. This specific model comes with no agitation. The tank is built to ASME specifications.

Why choose the Binks 183S-210 Pressure Tank?

The Binks 183S-210 is an excellent choice for applications that do not require agitation, particularly when using waterborne or chemically aggressive coatings. Its stainless steel construction provides the best corrosion resistance, making it durable for a wide range of materials. The single regulation system provides standard fluid pressure control to the tank only. This is suitable when precision control of both fluid and air pressures is not required, or when atomization air can be taken from filter/regulator air lines. This tank is particularly suited for materials that remain well dispersed over time or require minimal mixing and/or readily hold any solids in suspension.

Specific Use Cases:

• Waterborne Coatings: Its stainless steel construction makes it ideal for waterborne materials and other chemically aggressive coatings where corrosion resistance is paramount.
• Materials Requiring No Agitation: Perfect for coatings that remain well dispersed over time or require minimal mixing.
• Applications Requiring Single Regulation: Suitable for scenarios where only standard fluid pressure control to the tank is needed.
• Holding Tanks, Transfer Tanks: Can be used as a holding tank or transfer tank where precision fluid pressure control is not required.

Key Features and Specifications:

• Tank Model: 183S-210.
• Capacity: 2 gallons (Internal Volume: 2.8 gallons).
• Maximum Working Pressure: 110 psi.
• Tank Shell Material: 304 Stainless Steel.
• Tank Lid Material: 304 Stainless Steel.
• Regulation Type: Single regulation (regulated air to tank only).
• Agitation Type: No agitation.
• Fluid Tube: 3/8 in. SS Pipe, 316 Stainless Steel.
• Fluid Outlet (Elbow): 316 Stainless Steel.
• Fluid Valve, Outlet: 316 Stainless Steel 3/8-18 NPS(M).
• Air Manifold: Steel, Zinc Plate.
• Plug (Air Manifold Coupling): 18-8 Stainless Steel.
• Includes Fill Port: All 183S tanks include a fill port.
• Lid Orientation: Features a location lug to ensure proper lid orientation.
• Portability: Equipped with larger handles for increased portability.
• Approx. Shipping Weight: 39 lbs (for tanks without agitators).

Accessories & Options (Sold Separately):

• Bottom Outlet Kit (183-3000): Allows conversion from standard top outlet to bottom outlet. All bottom outlet wetted parts are stainless steel. Includes three 183-3005 Leg Kits.
• Fluid Strainer (VS-534): Primary fluid strainer that attaches between the fluid outlet valve and fluid hose to strain material. Components are made of stainless steel with a nylon filter. Comes standard with 100-mesh screen.
• Clean Air Control Units (HFRL-508, HFRL-509): Designed to remove dirt, pipe scale, and most liquid aerosol. Includes an automatic drain.
• Disposable Tank Liners (PT-78-K10/K60): Molded polyethylene tank liners reduce solvent waste and tank cleanup time. They are made of tough, durable, leakproof polyethylene and can be used with all compatible materials.
• Prospector™ Pressure Tank Strainers (PTS-2Gal-K20-200/400/600): Economical way to remove foreign material from paint, stain, lacquer, and coatings.

Binks pressure feed tanks are covered by Carlisle Fluid Technologies' one-year materials and workmanship limited warranty. The use of any parts or accessories from a source other than Carlisle Fluid Technologies will void all warranties. For specific warranty information, contact the closest Carlisle Fluid Technologies location. When you purchase this Binks 183S-210 pressure tank from an authorized distributor, you benefit from robust construction and versatile features for your coating applications.

Binks 2 Gallon Pressure Tank, Stainless Steel, 1 Regulator, No Agitator

The Binks 183S-210 pressure pot is 2 gallons & features a stainless steel construction. This is appropriate for solvent based materials and is ASME rated. Disposable liners are available for easy cleaning.

 The following setups are available for Binks 2 gallon pressure tanks:

183S-200 – No regulator, no agitation
183S-210 – Single regulator, no agitation 
183S-211 – Single regulator, direct drive agitator (current unit)
183S-213 – Single regulator, gear reduced agitator
183S-220 - Dual regulator, no agitation
183S-221 - Dual regulator, direct drive agitator
183S-223 - Dual regulator, gear reduced agitator
183S-230 - Single regulator (high precision), no agitation
183S-231 - Single regulator (high precision), direct drive agitator
183S-233 - Single regulator (high precision), gear reduced agitator
183S-240 - Dual regulator (high precision), no agitation
183S-241 - Dual regulator (high precision), direct drive agitator 
183S-243 - Dual regulator (high precision), gear reduced agitator

• Binks A.S.M.E. code tanks meet OSHA regulations when using flammable and combustible materials 
• Constructed from heavy gauge steel with forged steel clamps
• Higher pressure rating for heavier materials
• Range offers complete material handling suitability for solvent and waterborne coatings
• Inner liners reduce cleaning time and save coating material

Binks pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure.

The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure), safety pressure relief valves and manual, rotary or oscillating agitation types are available to provide the best quality agitation.

Binks Pressure Feed Containers are constructed from the highest-grade materials and fully comply with global pressure regulations including PED, ATEX and ASME.

Galvanized Pressure Tanks

Galvanized steel tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. The bottom outlet is recommended for heavy, viscous materials such as emulsified asphalts, cutback asphalts, rubber compounds, etc.

Stainless Steel Pressure Tanks

Stainless Steel Pressure Tanks are suitable for virtually all fluids and solvents. They are ASME certified and permanently labeled for 110 PSIG maximum working pressure. Tanks and lids are constructed of heavy gauge 304 stainless steel and are also electro polished. All models are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts.