Description
C.A. Technologies Jaguar 100C — J100C-10-2266-401 (1.0mm Nozzle, 2266 Air Cap)
The C.A. Technologies Jaguar 100C J100C-10-2266-401 is a 1.0mm gravity feed conventional spray gun paired with the 21-2266 air cap — the entry-point orifice in the J100C lineup, suited for thin lacquers, enamels, sealers, and primers that flow cleanly through a 1.0mm tip without the over-application that larger orifices produce on thin materials. At 12 SCFM from a standard gravity cup, this setup handles thin-to-medium viscosity coatings in the 16–20 sec. Zahn #2 range with a 12" fan pattern and straightforward gravity-feed simplicity — no pressure supply required. Used in woodworking shops, automotive finishing, and industrial coating operations running thin finish coatings where deposit control and material efficiency matter more than maximum fluid volume. The forged aluminum body carries all stainless steel fluid passages for full chemical resistance, and the gun ships with a 700mL aluminum gravity cup included. US made by C.A. Technologies in Louisville, CO. Call or text 586-210-0555 for setup guidance and availability before you order.
✓ 1.0mm stainless orifice — thin to medium materials • ✓ Gravity feed — 700mL aluminum cup included • ✓ 12 SCFM @ 50 PSI — 30-gallon compressor minimum • ✓ 12" max fan • ✓ All stainless fluid passages • ✓ US Made — CET Verified
Model: J100C-10-2266-401 • Nozzle: 1.0mm (.040") • Air Cap: 21-2266 • Feed: GRAVITY • SCFM: 12 @ 50 PSI
Cup: 51-401 700mL Aluminum (included) • Fan Control: 60-1500 (included) • Repair Kit: 10-105 • Max Inlet Pressure: 50 PSI • CET Verified Configuration
Overview
At a Glance
Specifications
Tech Specs
| Model | J100C-10-2266-401 |
| Fluid Nozzle | 31-0610 — 1.0mm (.040") 17-4PH Stainless |
| Air Cap | 21-2266 — Gravity, 12 SCFM @ 50 PSI |
| Needle | 40-1110 (110) — shared with 1.2mm and 1.3mm |
| Feed Type | GRAVITY — 700mL aluminum cup included, no pressure supply required |
| Gravity Cup Included | 51-401 700mL Aluminum — ships with gun |
| Max Inlet Pressure | 50 PSI |
| Air Consumption | 12 SCFM @ 50 PSI — requires minimum 30-gallon compressor at 90 PSI rated output |
| Max Pattern Width | 12" — suitable for panel and component finishing at thin viscosities |
| Air Inlet | 1/4" NPS (m) — standard shop air fitting |
| Fluid Inlet | 16mm x 1.5mm (m) — gravity cup threads directly onto gun |
| Body | Forged Aluminum — 20 oz., lightweight for all-day use |
| Fluid Passages | All Stainless Steel — chemical resistance to lacquers, enamels, and industrial topcoats |
| Fan Control | 60-1500 (included) — adjusts from full 12" fan down for targeted application |
| Repair Kit | 10-105 — all seals, o-rings, needle seal, springs for a complete rebuild |
| Fulfillment | Most in-stock orders ship same day — stocked at C.A. Technologies’ Colorado facility. Call or text 586-210-0555 to confirm availability. |
| Origin | US Made — C.A. Technologies (Louisville, CO) |
Application
CET Application Match — Best for This Setup
The CET Preferred Setup for thin coating applications where deposit control matters and a 1.2mm or larger orifice would over-apply the material. Based on over 20 years supplying industrial finishing equipment, CET’s technical team recommends the J100C-10-2266-401 for woodworking shops, cabinet finishers, and automotive refinishing operations running thin lacquers, sealers, and wash primers where precise material placement and reduced overspray are the priority over maximum fluid volume.
Common Questions
Frequently Asked Questions
- Is 1.0mm the smallest nozzle available for the J100C?
- The J100C-10-2266-401 is the smallest standard configuration in the J100C lineup. The manual lists 0.6mm and 0.7mm nozzles as available fluid tips — if your application requires a sub-1.0mm orifice for very thin inks, dyes, or solvents under 16 sec. Zahn #2, call or text 586-210-0555 and CET can confirm availability of those smaller nozzle setups.
- What materials work best at 1.0mm?
- Thin lacquers, enamels, wash primers, sealers, and stains in the 16–20 sec. Zahn #2 range. For materials outside this range — thinner than 16 sec. or thicker than 20 sec. — call or text 586-210-0555 to confirm the right orifice size.
- What compressor do I need for 12 SCFM?
- 12 SCFM @ 50 PSI is achievable with a 30-gallon compressor rated at 90 PSI output — one of the most compressor-friendly configurations in the J100C lineup. Most single-phase shop compressors in the 25–60 gallon range handle this comfortably.
- What repair kit does the Jaguar 100C use?
- All J100C configurations use repair kit 10-105, which includes all wear seals, o-rings, needle seal cartridge, and springs for a complete rebuild. CET stocks repair kits for same-day shipment — call or text 586-210-0555 to confirm availability.
- What needle does the 1.0mm nozzle use?
- The 1.0mm nozzle uses the 40-1110 (110) needle assembly, shared with the 1.2mm and 1.3mm configurations — one spare part covers three orifice sizes.
- Where can I find the full Jaguar 100C parts manual?
- The full parts manual with exploded diagram, air cap chart, and nozzle selection guide is available on the Jaguar J100C Spare Parts page or via the download button below. CET includes documentation with every order.
All Configurations
Find the Right Jaguar 100C for Your Application
The Jaguar 100C is available in 13 configurations covering 1.0mm through 2.8mm, with both stainless and carbide nozzle options. All configurations are CET Verified — supported by CET’s technical team and fulfilled through C.A. Technologies’ Colorado facility. Contact CET for a CET Application Match recommendation.
| Model | Nozzle | Air Cap | SCFM | Fan | Best For | Order |
|---|---|---|---|---|---|---|
| J100C-10-2266-401 | 1.0mm | 21-2266 | 12 | 12" | Thin — lacquers, enamels, sealers | Current |
| J100C-12-2266-401 | 1.2mm | 21-2266 | 12 | 12" | Thin-medium — lacquers, enamels, primers | Order |
| J100C-13-2266-401 | 1.3mm | 21-2266 | 12 | 12" | Medium — lacquers, primers, enamels | Order |
| J100C-13-2466-401 | 1.3mm | 21-2466 | 15 | 13" | Medium — wider fan, higher SCFM | Order |
| J100C-15-2266-401 | 1.5mm | 21-2266 | 12 | 12" | Medium — base coat, enamels, epoxies | Order |
| J100C-15-2366-401 | 1.5mm | 21-2366 | 12 | 10" | Medium — narrow fan, detail work | Order |
| J100C-15-2466-401 | 1.5mm | 21-2466 | 15 | 13" | Medium-heavy — enamels, urethanes, primers | Order |
| J100C-18-2266-401 | 1.8mm | 21-2266 | 12 | 12" | Medium-heavy — clear coat, epoxies | Order |
| J100C-18-2466-401 | 1.8mm | 21-2466 | 15 | 13" | Heavy — high solid coatings, gelcoat | Order |
| J100C-18-1590-401 | 1.8mm | 1590 | Low | — | Low CFM — sensitive substrates | Order |
| J100C-22-2467-401 | 2.2mm | 21-2467 | 15 | 14" | Heavy — heavy body primers, high solid enamels | Order |
| J100C-28-2268-401 | 2.8mm | 21-2268 | 15 | 14" | Ultra-heavy — gelcoat, C.A. Tech recommended | Order |
| J100C-28V-2268-401 | 2.8mm carbide | 21-2268 | 15 | 14" | Ultra-heavy — abrasive gelcoat, abrasive materials | Order |
Why Buy From CET
The CET Difference
- Over 20 years supplying industrial finishing equipment — CET has been matching customers to the right C.A. Technologies configuration since the beginning. We know these guns inside and out.
- Real technical support before and after the sale — call or text 586-210-0555 to reach CET’s technical team directly. We’ll confirm your nozzle, air cap, and setup before you order so you get it right the first time.
- Fast fulfillment on most in-stock orders — C.A. Technologies stocks these guns at their Colorado facility and most orders ship same day. Call or text 586-210-0555 to verify availability and confirm your ship date before ordering.
- Verified part compatibility — every configuration on this page is CET Verified. We stock the gun, the repair kit, the air caps, and the spare parts — so you’re never waiting on back-ordered components.
- Documentation included — every order ships with access to the full parts manual, air cap chart, and nozzle selection guide. No hunting for documentation after the sale.
- The best order fulfillment in the industry — you receive updates at every step of the process so you know exactly where your order is at all times. And in the rare case there’s a delay, we’ll let you know in advance — so you’re never chasing an order down again.
Why Choose the Jaguar 100C
Conventional Dependability Across Every Viscosity
The Jaguar 100C is C.A. Technologies’ workhorse conventional gravity feed gun — a forged aluminum body with all stainless steel fluid passages, nine air cap options, and nozzles from 1.0mm to 2.8mm covering the full spectrum from thin lacquers to ultra-heavy gelcoat in a single gun platform.
- All stainless steel fluid passages: Full chemical resistance to lacquers, enamels, automotive coatings, and industrial topcoats — no corrosion or degradation over extended production use.
- Gravity feed simplicity: Cup threads directly onto the gun. No pressure pot, no hose management. Portable setup for operators moving between components and workstations.
- Carbide nozzle options: Available at 2.8mm for abrasive or particle-laden materials that cause accelerated stainless nozzle wear.
- Forged aluminum body at 20 oz.: Lightweight enough for extended finishing sessions without operator fatigue building across a shift.
- 13 active configurations: From 1.0mm thin lacquers to 2.8mm ultra-heavy gelcoat, with both stainless and carbide nozzle options at the largest orifice size.
Gravity Cups & Accessories
Available Cups & Accessories
| Part # | Description | Notes |
|---|---|---|
| 51-401 | 700mL Aluminum Gravity Cup | Included with gun. Standard cup for most applications |
| 51-403 | 1000mL Aluminum Gravity Cup | Optional — larger capacity for extended runs. Uses same 51-418 lid |
| 51-400 | 700mL Plastic Gravity Cup | Optional — lighter weight alternative |
| 51-418 | Gravity Cup Lid | For 51-401 and 51-403 aluminum cups |
| 52-300 | Mini Gun Regulator | Optional inline regulator for precise gun inlet pressure control |
| 51-432 | Magnetic Gravity Gun Stand | Optional — holds gun securely on metal surfaces between passes |
Jaguar 100C Product Manual
Full parts diagram, air cap chart, nozzle selection guide & replacement part numbers for all J100C configurations
Download the Jaguar 100C ManualNeed Help Selecting the Right Configuration?
Contact CET’s technical support team with your material type and viscosity. Based on over 20 years of industrial finishing equipment experience, we’ll confirm the correct Jaguar 100C nozzle and air cap combination and verify same-day availability. Call or text 586-210-0555.
