null

C.A. Technologies Bobcat Automatic Air Assisted Airless Spray Gun (715 Tip) (AB715)

SKU:
AB715
Bobcat Automatic Air Assist Airless (AUTO BOBCAT),AB211,AB213,AB309,AB311,AB313,AB315,AB409,AB411,AB413,AB415,AB509,AB511,AB513,AB515,AB517,AB611,AB613,AB615,AB617,AB619,AB621,AB711,AB713,AB715,AB717,AB815,AB821
$1,196.33
Shipping:
Calculated at Checkout

Description

 

C.A. Technologies · Automatic Air Assist Airless · Authorized Distributor

Bobcat Automatic
AB715 · 0.015” Tip · 70° · 14” Pattern

Automatic Air Assist Airless · Machine-Mount · All-Stainless · US Made

Automatic Recirc / Non-Recirc 2500 PSI Max US Made
Speccing an automatic finishing line?   CET’s technical team will confirm the right Auto Bobcat tip and recirculation setup for your coating before you order. 586-210-0555 sales@cetinc.com
AB715
Model
0.015”
Orifice
70°
Spray Angle
14”
Pattern
2500
PSI Max

Overview

Automatic.
Production Finishing.

The AB715 is the automatic C.A. Technologies Bobcat — the machine-mount air-assist-airless gun set up with the 36-715 AAA carbide tip (0.015” orifice, 70° angle, ~14” fan) for primers, sealers, and higher-output finishing in production wood and metal finishing.

At 0.015”, fluid delivery is approximately 22 oz/min at 1000 PSI. The all-stainless fluid section handles solvent and waterborne coatings without corrosion; the AAA tip and 26-101 HVLP air cap break the coating into a soft, fine spray with superior transfer efficiency. Maximum working pressure is 2500 PSI fluid.

Airless fluid pressure does the primary atomization; a low volume of HVLP air refines the pattern. Pneumatically actuated for automatic lines — pair with an AAA pump such as the Peak 14:1. A revolutionary needle design simplifies flushing, cleaning, and maintenance.

Why This Configuration?

The Right Automatic
Setup.

Automatic / Machine-Mount Pneumatically actuated for reciprocators, flat-line, and robotic finishing. All-stainless wetted areas suit production wood and metal finishing, and the revolutionary needle design simplifies cleaning and maintenance.
70° / 14” Pattern The 70° spray angle lays down an approximately 14” fan for primers, sealers, and higher-output finishing. Adjust the fan control to narrow the pattern as the work requires.
Recirc or Non-Recirc Ships ready for either plumbing — recirculate through the head (both ports 66-253) or run dead-end (one port blanked, 66-253-B). Circulates close to the tip to keep material from settling.
Direct Competitor Replacement The 36-715 AAA carbide tip mounts on a gun built as a direct replacement for existing competitor automatics — virtually no change to the mounting block or hardware, so retrofits are quick.

Configuration Detail

AB715 — At a Glance

Fluid Tip

36-715

0.015” orifice · 70° angle · ~14” pattern. AAA carbide, field-replaceable; tuned for primers, sealers, and higher-output finishing.

Air Cap

26-101

AAA HVLP air cap

Refines airless atomization with a small volume of HVLP air for a soft, fine break-up on production finishes.

Gun Type

AAA · Automatic

Machine-mount · 2500 PSI max

All-stainless fluid section, pneumatically actuated. Requires an AAA pump (e.g., Peak 14:1).

Recirculating or Non-Recirculating

Every Auto Bobcat ships ready for either plumbing. For fluid recirculation through the head, both manifold ports carry fluid inlet 66-253 and fluid can enter from either side. For a non-recirculating (dead-end) setup, one port is blanked with 66-253-B and fluid enters the open side. The gun circulates very close to the tip to keep material from settling.

Other 70° Automatic Configurations

ModelTipOrificeAnglePatternBest For
AB71136-7110.011”70°14”Fine lacquers, enamels, and waterborne topcoats
AB71336-7130.013”70°14”Medium-viscosity production coatings
AB715 ← Current36-7150.015”70°14”Primers, sealers, and higher-output finishing
AB71736-7170.017”70°14”Heavy primers and high-solid coatings

Technical Data

Key Specifications

ModelAB715
Gun TypeAutomatic Air Assist Airless (AAA) · Machine-Mount
Fluid Tip36-715 — 0.015” · 70° · ~14”
Air Cap26-101 — AAA HVLP
Air Consumption6 CFM at gun
Max Fluid Pressure2500 PSI
Flow @ 1000 PSI~22 oz/min
Pattern Width~14”
CirculationRecirculating or non-recirculating
Fluid PassagesAll Stainless Steel
Air Inlet1/4” NPS (m)
Fluid Inlet1/4” NPS (m)
Weight20 oz.
Repair Kit (seals)10-144
Repair Kit (complete)10-145

Application Match

CET Application Guide

Best-fit materialsPrimers, high-build sealers, and pigmented coatings where higher fluid delivery speeds production.
Fluid pressure guidanceStart low and raise until atomization is consistent. Do not exceed 2500 PSI.
MountingDirect replacement for existing competitor guns with virtually no change to the mounting block or hardware. Standard manifold 66-266; Cefla manifold with pivot hub 66-268.
Compressor sizingGun draws 6 CFM — add pump CFM for the total. Call 586-210-0555.

Repair Kits

10-144
Soft Seals Only
O-rings and soft seals for routine maintenance
10-145
Complete Kit
Full overhaul — soft seals plus needle and needle seal assembly

All Automatic Configurations

The Bobcat Automatic Line-Up

All 27 Bobcat Automatic configurations are CET Verified. Click any model for its full spec page.

ModelTipOrificeAnglePatternBest For
20° — 4” Pattern
AB21136-2110.011”20°4”Fine lacquers, enamels, and waterborne topcoats
AB21336-2130.013”20°4”Medium-viscosity production coatings
30° — 6” Pattern
AB30936-3090.009”30°6”Thin sealers, stains, and very fine topcoats
AB31136-3110.011”30°6”Fine lacquers, enamels, and waterborne topcoats
AB31336-3130.013”30°6”Medium-viscosity production coatings
AB31536-3150.015”30°6”Primers, sealers, and higher-output finishing
40° — 8” Pattern
AB40936-4090.009”40°8”Thin sealers, stains, and very fine topcoats
AB41136-4110.011”40°8”Fine lacquers, enamels, and waterborne topcoats
AB41336-4130.013”40°8”Medium-viscosity production coatings
AB41536-4150.015”40°8”Primers, sealers, and higher-output finishing
50° — 10” Pattern
AB50936-5090.009”50°10”Thin sealers, stains, and very fine topcoats
AB51136-5110.011”50°10”Fine lacquers, enamels, and waterborne topcoats
AB51336-5130.013”50°10”Medium-viscosity production coatings
AB51536-5150.015”50°10”Primers, sealers, and higher-output finishing
AB51736-5170.017”50°10”Heavy primers and high-solid coatings
60° — 12” Pattern
AB61136-6110.011”60°12”Fine lacquers, enamels, and waterborne topcoats
AB61336-6130.013”60°12”Medium-viscosity production coatings
AB61536-6150.015”60°12”Primers, sealers, and higher-output finishing
AB61736-6170.017”60°12”Heavy primers and high-solid coatings
AB61936-6190.019”60°12”Very heavy materials at high volume
AB62136-6210.021”60°12”The thickest materials at maximum output
70° — 14” Pattern
AB71136-7110.011”70°14”Fine lacquers, enamels, and waterborne topcoats
AB71336-7130.013”70°14”Medium-viscosity production coatings
AB715 ← Current36-7150.015”70°14”Primers, sealers, and higher-output finishing
AB71736-7170.017”70°14”Heavy primers and high-solid coatings
80° — 16” Pattern
AB81536-8150.015”80°16”Primers, sealers, and higher-output finishing
AB82136-8210.021”80°16”The thickest materials at maximum output

Common Questions

Frequently Asked Questions

How is the automatic different from the hand-held Bobcat?

The Bobcat Automatic is machine-mounted and pneumatically actuated for reciprocators, flat-line, and robotic finishing — no trigger. It runs at up to 2500 PSI fluid and mounts as a direct replacement for common competitor automatic guns with virtually no hardware change.

Can it recirculate fluid?

Yes. Every gun ships able to run recirculating (both ports fitted with 66-253) or non-recirculating (one port blanked with 66-253-B). It circulates close to the tip to keep material from settling. Standard or Cefla (pivot-hub) manifold available.

What tip does the AB715 use?

The 36-715 AAA carbide tip — 0.015” orifice, 70° angle, ~14” pattern — delivering approximately 22 oz/min at 1000 PSI. Tips are field-replaceable; ask CET about other angles and orifices.

What repair kit does it use?

10-144 covers routine soft-seal maintenance; 10-145 adds the needle and needle-seal assembly for a complete overhaul. CET stocks both.

Bobcat Automatic — Parts & Manual

Exploded diagram, tip flow chart, maintenance procedures & every replacement part number.

 Parts & Manual →

Not sure the AB715 is the right automatic setup for your line? Contact CET’s technical team with your material type, viscosity, and mounting — we’ll confirm the right Auto Bobcat tip and manifold before you order. See all Bobcat Automatic spray guns. — 586-210-0555  ·  sales@cetinc.com

Extra Information

Brand:
C. A. Technologies
Gun Model:
AB715
Gun Body:
Bobcat Automatic (machine-mount)
Gun Type:
Air Assist Airless (AAA)
Actuation:
Automatic / pneumatic
Fluid Tip:
36-715 (AAA carbide)
Orifice:
0.015"
Spray Angle:
70°
Pattern Width:
~14"
Fluid Delivery:
~22 oz/min @ 1000 PSI
Air Consumption:
6 CFM at gun
Air Cap:
26-101 (AAA HVLP)
Max Fluid Pressure:
2500 PSI
Circulation:
Recirculating or non-recirculating
Fluid Passages:
All Stainless Steel
Air Inlet:
1/4" NPS (m)
Fluid Inlet:
1/4" NPS (m)
Repair Kit (Seals):
10-144
Repair Kit (Complete):
10-145
Gun Weight:
20 oz.
Origin:
US Made — C.A. Technologies

Related Products

C.A. Technologies Bobcat Air Assist Airless Spray Gun (715 Tip)
Quick view

C. A. Technologies

SKU: B715

C.A. Technologies Bobcat Air Assist Airless Spray Gun (715 Tip) (B715)

Gun Model: B715
Gun Body: Bobcat (Compact)
Gun Type: Air Assist Airless (AAA)
Fluid Tip: 36-715
Orifice: 0.015"
Spray Angle: 70°
Pattern Width: ~14"
Fluid Delivery: ~22 oz/min @ 1000 PSI
Air Consumption: 6 CFM at gun
HVLP Max Air: 18 PSI at handle
Max Fluid Pressure: 1500 PSI
Fluid Passages: All Stainless Steel
Standard Filter: 100 mesh (66-125)
Repair Kit (Seals): 10-137
Repair Kit (Complete): 10-138
Gun Weight: 17 oz.
Air / Fluid Inlet: 1/4" NPS (m)
Origin: US Made — C.A. Technologies
$888.47
Bobcat Automatic Air Assist Airless (AUTO BOBCAT),AB211,AB213,AB309,AB311,AB313,AB315,AB409,AB411,AB413,AB415,AB509,AB511,AB513,AB515,AB517,AB611,AB613,AB615,AB617,AB619,AB621,AB711,AB713,AB715,AB717,AB815,AB821
Quick view

C. A. Technologies

SKU: AB213

C.A. Technologies Bobcat Automatic Air Assisted Airless Spray Gun (213 Tip) (AB213)

Gun Model: AB213
Gun Body: Bobcat Automatic (machine-mount)
Gun Type: Air Assist Airless (AAA)
Actuation: Automatic / pneumatic
Fluid Tip: 36-213 (AAA carbide)
Orifice: 0.013"
Spray Angle: 20°
Pattern Width: ~4"
Fluid Delivery: ~17 oz/min @ 1000 PSI
Air Consumption: 6 CFM at gun
Air Cap: 26-101 (AAA HVLP)
Max Fluid Pressure: 2500 PSI
Circulation: Recirculating or non-recirculating
Fluid Passages: All Stainless Steel
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 1/4" NPS (m)
Repair Kit (Seals): 10-144
Repair Kit (Complete): 10-145
Gun Weight: 20 oz.
Origin: US Made — C.A. Technologies
$1,196.33
*Free Shipping to Continental US* Ships within 24 hours unless backordered
Bobcat Automatic Air Assist Airless (AUTO BOBCAT),AB211,AB213,AB309,AB311,AB313,AB315,AB409,AB411,AB413,AB415,AB509,AB511,AB513,AB515,AB517,AB611,AB613,AB615,AB617,AB619,AB621,AB711,AB713,AB715,AB717,AB815,AB821
Quick view

C. A. Technologies

SKU: AB313

C.A. Technologies Bobcat Automatic Air Assisted Airless Spray Gun (313 Tip) (AB313)

Gun Model: AB313
Gun Body: Bobcat Automatic (machine-mount)
Gun Type: Air Assist Airless (AAA)
Actuation: Automatic / pneumatic
Fluid Tip: 36-313 (AAA carbide)
Orifice: 0.013"
Spray Angle: 30°
Pattern Width: ~6"
Fluid Delivery: ~17 oz/min @ 1000 PSI
Air Consumption: 6 CFM at gun
Air Cap: 26-101 (AAA HVLP)
Max Fluid Pressure: 2500 PSI
Circulation: Recirculating or non-recirculating
Fluid Passages: All Stainless Steel
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 1/4" NPS (m)
Repair Kit (Seals): 10-144
Repair Kit (Complete): 10-145
Gun Weight: 20 oz.
Origin: US Made — C.A. Technologies
$1,196.33
*Free Shipping to Continental US* Ships within 24 hours unless backordered
Bobcat Automatic Air Assist Airless (AUTO BOBCAT),AB211,AB213,AB309,AB311,AB313,AB315,AB409,AB411,AB413,AB415,AB509,AB511,AB513,AB515,AB517,AB611,AB613,AB615,AB617,AB619,AB621,AB711,AB713,AB715,AB717,AB815,AB821
Quick view

C. A. Technologies

SKU: AB613

C.A. Technologies Bobcat Automatic Air Assisted Airless Spray Gun (613 Tip) (AB613)

Gun Model: AB613
Gun Body: Bobcat Automatic (machine-mount)
Gun Type: Air Assist Airless (AAA)
Actuation: Automatic / pneumatic
Fluid Tip: 36-613 (AAA carbide)
Orifice: 0.013"
Spray Angle: 60°
Pattern Width: ~12"
Fluid Delivery: ~17 oz/min @ 1000 PSI
Air Consumption: 6 CFM at gun
Air Cap: 26-101 (AAA HVLP)
Max Fluid Pressure: 2500 PSI
Circulation: Recirculating or non-recirculating
Fluid Passages: All Stainless Steel
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 1/4" NPS (m)
Repair Kit (Seals): 10-144
Repair Kit (Complete): 10-145
Gun Weight: 20 oz.
Origin: US Made — C.A. Technologies
$1,196.33
*Free Shipping to Continental US* Ships within 24 hours unless backordered
Bobcat Automatic Air Assist Airless (AUTO BOBCAT),AB211,AB213,AB309,AB311,AB313,AB315,AB409,AB411,AB413,AB415,AB509,AB511,AB513,AB515,AB517,AB611,AB613,AB615,AB617,AB619,AB621,AB711,AB713,AB715,AB717,AB815,AB821
Quick view

C. A. Technologies

SKU: AB311

C.A. Technologies Bobcat Automatic Air Assisted Airless Spray Gun (311 Tip) (AB311)

Gun Model: AB311
Gun Body: Bobcat Automatic (machine-mount)
Gun Type: Air Assist Airless (AAA)
Actuation: Automatic / pneumatic
Fluid Tip: 36-311 (AAA carbide)
Orifice: 0.011"
Spray Angle: 30°
Pattern Width: ~6"
Fluid Delivery: ~13 oz/min @ 1000 PSI
Air Consumption: 6 CFM at gun
Air Cap: 26-101 (AAA HVLP)
Max Fluid Pressure: 2500 PSI
Circulation: Recirculating or non-recirculating
Fluid Passages: All Stainless Steel
Air Inlet: 1/4" NPS (m)
Fluid Inlet: 1/4" NPS (m)
Repair Kit (Seals): 10-144
Repair Kit (Complete): 10-145
Gun Weight: 20 oz.
Origin: US Made — C.A. Technologies
$1,196.33
*Free Shipping to Continental US* Ships within 24 hours unless backordered