Description

C.A. Technologies · Waterborne Air Assist Airless · Authorized Distributor

Bobcat Waterborne
H20-B413F · 0.013” F Tip · 40° · 8” Pattern

Name: C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (413F Tip) (H20-B413F)
Brand: C. A. Technologies
SKU: H20-B413F
Price: 908.51 USD
Availability: InStock

Waterborne · Fine-Finish F Tip · Compact Bobcat · US Made

Waterborne 0.013” F Tip HVLP Compliant US Made

Dialing in a waterborne finish? CET’s technical team will confirm the right Bobcat tip for your coating before you order.

586-210-0555 sales@cetinc.com

H20-B413F

Model

0.013”

Orifice

40°

Spray Angle

8”

Pattern

6 CFM

Air @ Gun

Overview

Waterborne.
Fine Finish.

The H20-B413F is the waterborne C.A. Technologies Bobcat - the compact air-assist-airless gun set up with the fine-finish 36-413F tip (0.013” orifice, 40° angle, ~8” fan) for medium-viscosity production coatings in water-based coatings.

At 0.013”, fluid delivery is approximately 17 oz/min at 1000 PSI. The all-stainless fluid section handles waterborne lacquers, stains, and topcoats without corrosion; the fine-finish F tip and 26-101 HVLP air cap break the coating into the soft, fine spray that water-based finishes demand - HVLP compliant at ≤18 PSI at the handle.

Airless fluid pressure does the primary atomization; a low volume of HVLP air refines the pattern. Runs on as little as a 1.5 HP compressor with a suitable AAA pump.

Why This Configuration?

The Right Waterborne
Setup.

Built For Waterborne Water-based lacquers, stains, and topcoats on the all-stainless Bobcat fluid section - no corrosion, no contamination. The fine-finish F tip delivers the soft atomization premium waterborne finishes demand.

40° / 8” Pattern The 40° spray angle lays down an approximately 8” fan for medium-viscosity production coatings. Turn the fan control to narrow the pattern as the work requires.

Compact Bobcat Body HVLP compliant at ≤18 PSI air at the handle, with an integrated fluid filter and the same 26-101 air cap as every Bobcat. Weighs 17 oz.

Fine-Finish F Tip The 36-413F is the fine-finish “F” version of the 0.013” / 40° tip - tuned for the softest break-up on water-based coatings that flash fast and show every defect.

Configuration Detail

H20-B413F — At a Glance

Waterborne · Fine-Finish F Tip

The H20-B413F is the waterborne configuration - the Bobcat gun with the fine-finish 36-413F tip for water-based lacquers, stains, and topcoats on the all-stainless fluid section. Prefer solvent? The B413 is the same gun and tip for solvent-based coatings.

Fluid Tip (F)

36-413F

Fine-finish “F” tip · 0.013” orifice · 40° angle · ~8” pattern. Field-replaceable; tuned for waterborne medium-viscosity production coatings.

Air Cap

26-101

AAA HVLP air cap · ≤18 PSI at handle

Refines airless atomization with a small volume of HVLP air for the soft break-up waterborne finishes need.

Gun Type

AAA · Compact

Waterborne · 1500 PSI max

All-stainless fluid section. Requires an AAA pump (e.g., Peak 14:1).

Other 40° Waterborne Configurations

Model	Tip	Orifice	Angle	Pattern	Best For
H20-B409F	36-409F	0.009”	40°	8”	Thin sealers, stains, and very fine topcoats
H20-B411F	36-411F	0.011”	40°	8”	Fine lacquers, enamels, and waterborne topcoats
H20-B413F ← Current	36-413F	0.013”	40°	8”	Medium-viscosity production coatings

Technical Data

Key Specifications

Model	H20-B413F
Coating Type	Waterborne (water-based)
Gun Type	Air Assist Airless (AAA) · Compact
Fluid Tip	36-413F — fine-finish · 0.013” · 40° · ~8”
Air Cap	26-101 — AAA HVLP
Air Consumption	6 CFM at gun
HVLP Compliance	Yes — ≤18 PSI air at handle
Max Fluid Pressure	1500 PSI
Flow @ 1000 PSI	~17 oz/min
Pattern Width	~8”
Fluid Passages	All Stainless Steel
Weight	17 oz.
Repair Kit (seals)	10-137
Repair Kit (complete)	10-138

Application Match

CET Application Guide

Best-fit materials	Water-based lacquers, stains, and topcoats requiring a fine finish.
Fluid pressure guidance	Start at 350–500 PSI and raise until atomization is consistent. Do not exceed 1500 PSI.
Why the F tip	The fine-finish “F” tip gives the soft break-up water-based coatings need to flow out without orange peel.
Compressor sizing	Gun draws 6 CFM — most 1.5–3 HP compressors cover it. Add pump CFM for the total. Call 586-210-0555.

Repair Kits

10-137 Soft Seals Only	O-rings and seals for routine maintenance
10-138 Complete Kit	Full overhaul kit — soft seals plus wear parts

All Waterborne Configurations

The Bobcat Waterborne Line-Up

All 11 Bobcat waterborne configurations are CET Verified. Click any model for its full spec page.

Model	Tip	Orifice	Angle	Pattern	Best For
20° — 4” Pattern
H20-B211F	36-211F	0.011”	20°	4”	Fine lacquers, enamels, and waterborne topcoats
30° — 6” Pattern
H20-B311F	36-311F	0.011”	30°	6”	Fine lacquers, enamels, and waterborne topcoats
H20-B313	36-313	0.013”	30°	6”	Medium-viscosity production coatings
40° — 8” Pattern
H20-B409F	36-409F	0.009”	40°	8”	Thin sealers, stains, and very fine topcoats
H20-B411F	36-411F	0.011”	40°	8”	Fine lacquers, enamels, and waterborne topcoats
H20-B413F ← Current	36-413F	0.013”	40°	8”	Medium-viscosity production coatings
50° — 10” Pattern
H20-B509F	36-509F	0.009”	50°	10”	Thin sealers, stains, and very fine topcoats
H20-B511F	36-511F	0.011”	50°	10”	Fine lacquers, enamels, and waterborne topcoats
H20-B513F	36-513F	0.013”	50°	10”	Medium-viscosity production coatings
60° — 12” Pattern
H20-B613F	36-613F	0.013”	60°	12”	Medium-viscosity production coatings
70° — 14” Pattern
H20-B715F	36-715F	0.015”	70°	14”	Primers, sealers, and higher-output finishing

Common Questions

Frequently Asked Questions

What makes this the waterborne version? The Bobcat gun body is all-stainless and handles water-based coatings directly. The waterborne build pairs it with the fine-finish 36-413F “F” tip for the soft atomization water-based lacquers and topcoats need to flow out cleanly.	Can I spray solvent coatings with it too? Yes — the all-stainless section handles both. For a solvent-first setup, the standard Bobcat guns use the same platform. Ask CET which tip best fits your material.
What fluid pressure should I use? Start at 350–500 PSI and increase until atomization is consistent. Waterborne coatings at 0.013” typically atomize well below the maximum. Do not exceed 1500 PSI.	What repair kit does it use? 10-137 covers routine soft-seal maintenance; 10-138 is the complete overhaul kit. CET stocks both.

Bobcat Air Assist Airless — Parts Manual

Full exploded diagram, tip flow chart, air consumption data & all replacement part numbers.

↓ Download Manual

Not sure if the H20-B413F is the right waterborne setup for your coating? Contact CET’s technical team with your material type and viscosity — we’ll confirm the right Bobcat tip before you order. See all Bobcat AAA spray guns. — 586-210-0555 · sales@cetinc.com

Extra Information

Brand:

C. A. Technologies

Gun Model:

H20-B413F

Gun Body:

Bobcat (Compact)

Gun Type:

Air Assist Airless (AAA)

Coating Type:

Waterborne

Fluid Tip:

36-413F (fine-finish)

Orifice:

0.013"

Spray Angle:

40°

Pattern Width:

~8"

Fluid Delivery:

~17 oz/min @ 1000 PSI

Air Consumption:

6 CFM at gun

HVLP Max Air:

18 PSI at handle

Max Fluid Pressure:

1500 PSI

Fluid Passages:

All Stainless Steel

Standard Filter:

100 mesh (66-125)

Repair Kit (Seals):

10-137

Repair Kit (Complete):

10-138

Gun Weight:

17 oz.

Origin:

US Made — C.A. Technologies

C.A. Technologies H20 Cougar Air Assist Airless Spray Gun for Waterborne (413F Tip) (H20-C413F)

Gun Model: H20-C413F

Gun Body: Cougar (Full-Size)

Gun Type: Air Assist Airless (AAA)

Coating Type: Waterborne

Fluid Tip: 36-413F (fine-finish)

Orifice: 0.013"

Spray Angle: 40°

Pattern Width: ~8"

Fluid Delivery: ~17 oz/min @ 1000 PSI

Air Consumption: 6 CFM at gun

HVLP Max Air: 15 PSI at handle

Max Fluid Pressure: 1500 PSI

Fluid Passages: All Stainless Steel

Standard Filter: 100 mesh (66-125)

Repair Kit (Seals): 10-127

Repair Kit (Complete): 10-113

Gun Weight: 23 oz.

Origin: US Made — C.A. Technologies

MSRP:

List:

$908.51

*Login to your account and save up to 15%* Ships within 24 hours unless backordered

C. A. Technologies

SKU: H20-B211F

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (211F Tip) (H20-B211F)

Gun Model: H20-B211F

Gun Body: Bobcat (Compact)

Gun Type: Air Assist Airless (AAA)

Coating Type: Waterborne

Fluid Tip: 36-211F (fine-finish)

Orifice: 0.011"

Spray Angle: 20°

Pattern Width: ~4"

Fluid Delivery: ~13 oz/min @ 1000 PSI

Air Consumption: 6 CFM at gun

HVLP Max Air: 18 PSI at handle

Max Fluid Pressure: 1500 PSI

Fluid Passages: All Stainless Steel

Standard Filter: 100 mesh (66-125)

Repair Kit (Seals): 10-137

Repair Kit (Complete): 10-138

Gun Weight: 17 oz.

Origin: US Made — C.A. Technologies

MSRP:

List:

$908.51

*Login to your account and save up to 15%* Ships within 24 hours unless backordered

C. A. Technologies

SKU: H20-B313

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (313F Tip) (H20-B313)

Gun Model: H20-B313

Gun Body: Bobcat (Compact)

Gun Type: Air Assist Airless (AAA)

Coating Type: Waterborne

Fluid Tip: 36-313 (fine-finish)

Orifice: 0.013"

Spray Angle: 30°

Pattern Width: ~6"

Fluid Delivery: ~17 oz/min @ 1000 PSI

Air Consumption: 6 CFM at gun

HVLP Max Air: 18 PSI at handle

Max Fluid Pressure: 1500 PSI

Fluid Passages: All Stainless Steel

Standard Filter: 100 mesh (66-125)

Repair Kit (Seals): 10-137

Repair Kit (Complete): 10-138

Gun Weight: 17 oz.

Origin: US Made — C.A. Technologies

MSRP:

List:

$908.51

*Login to your account and save up to 15%* Ships within 24 hours unless backordered

C. A. Technologies

SKU: H20-B715F

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (715F Tip) (H20-B715F)

Gun Model: H20-B715F

Gun Body: Bobcat (Compact)

Gun Type: Air Assist Airless (AAA)

Coating Type: Waterborne

Fluid Tip: 36-715F (fine-finish)

Orifice: 0.015"

Spray Angle: 70°

Pattern Width: ~14"

Fluid Delivery: ~22 oz/min @ 1000 PSI

Air Consumption: 6 CFM at gun

HVLP Max Air: 18 PSI at handle

Max Fluid Pressure: 1500 PSI

Fluid Passages: All Stainless Steel

Standard Filter: 100 mesh (66-125)

Repair Kit (Seals): 10-137

Repair Kit (Complete): 10-138

Gun Weight: 17 oz.

Origin: US Made — C.A. Technologies

MSRP:

List:

$908.51

*Login to your account and save up to 15%* Ships within 24 hours unless backordered

C. A. Technologies

SKU: H20-B511F

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (511F Tip) (H20-B511F)

Gun Model: H20-B511F

Gun Body: Bobcat (Compact)

Gun Type: Air Assist Airless (AAA)

Coating Type: Waterborne

Fluid Tip: 36-511F (fine-finish)

Orifice: 0.011"

Spray Angle: 50°

Pattern Width: ~10"

Fluid Delivery: ~13 oz/min @ 1000 PSI

Air Consumption: 6 CFM at gun

HVLP Max Air: 18 PSI at handle

Max Fluid Pressure: 1500 PSI

Fluid Passages: All Stainless Steel

Standard Filter: 100 mesh (66-125)

Repair Kit (Seals): 10-137

Repair Kit (Complete): 10-138

Gun Weight: 17 oz.

Origin: US Made — C.A. Technologies

MSRP:

List:

$908.51

*Login to your account and save up to 15%* Ships within 24 hours unless backordered

C. A. Technologies

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (413F Tip) (H20-B413F)

Description

Bobcat WaterborneH20-B413F · 0.013” F Tip · 40° · 8” Pattern

Waterborne.Fine Finish.

The Right WaterborneSetup.

H20-B413F — At a Glance

Key Specifications

CET Application Guide

The Bobcat Waterborne Line-Up

Frequently Asked Questions

Bobcat Air Assist Airless — Parts Manual

Extra Information

Related Products

C.A. Technologies H20 Cougar Air Assist Airless Spray Gun for Waterborne (413F Tip) (H20-C413F)

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (211F Tip) (H20-B211F)

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (313F Tip) (H20-B313)

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (715F Tip) (H20-B715F)

C.A. Technologies H20 Bobcat Air Assist Airless Spray Gun for Waterborne (511F Tip) (H20-B511F)

Bobcat Waterborne
H20-B413F · 0.013” F Tip · 40° · 8” Pattern

Waterborne.
Fine Finish.

The Right Waterborne
Setup.